add disclaimer and bump to 0.21

Fix ARM checks

spectre-meltdown-checker.sh

@@ -8,11 +8,261 @@
 #
 # Stephane Lesimple
 #
-VERSION=0.18
+VERSION=0.21
+
+# Script configuration
+show_usage()
+{
+	cat <<EOF
+	Usage:
+		Live mode:    $0 [options] [--live]
+		Offline mode: $0 [options] [--kernel <vmlinux_file>] [--config <kernel_config>] [--map <kernel_map_file>]
+
+	Modes:
+		Two modes are available.
+
+		First mode is the "live" mode (default), it does its best to find information about the currently running kernel.
+		To run under this mode, just start the script without any option (you can also use --live explicitely)
+
+		Second mode is the "offline" mode, where you can inspect a non-running kernel.
+		You'll need to specify the location of the vmlinux file, and if possible, the corresponding config and System.map files:
+
+		--kernel vmlinux_file		Specify a (possibly compressed) vmlinux file
+		--config kernel_config		Specify a kernel config file
+		--map	 kernel_map_file	Specify a kernel System.map file
+
+	Options:
+		--no-color			Don't use color codes
+		-v, --verbose			Increase verbosity level
+		--batch				Produce machine readable output
+
+	IMPORTANT:
+	A false sense of security is worse than no security at all.
+	Please use the --disclaimer option to understand exactly what this script does.
+
+EOF
+}
+
+show_disclaimer()
+{
+	cat <<EOF
+Disclaimer:
+
+This tool does its best to determine whether your system is immune (or has proper mitigations in place) for the
+collectively named "speculative execution" vulnerabilities. It doesn't attempt to run any kind of exploit, and can't guarantee
+that your system is secure, but rather helps you verifying whether your system has the known correct mitigations in place.
+However, some mitigations could also exist in your kernel that this script doesn't know (yet) how to detect, or it might
+falsely detect mitigations that in the end don't work as expected (for example, on backported or modified kernels).
+
+Your system exposure also depends on your CPU. As of now, AMD and ARM processors are marked as immune to some or all of these
+vulnerabilities (except some specific ARM models). All Intel processors manufactured since circa 1995 are thought to be vulnerable.
+Whatever processor one uses, one might seek more information from the manufacturer of that processor and/or of the device
+in which it runs.
+
+The nature of the discovered vulnerabilities being quite new, the landscape of vulnerable processors can be expected
+to change over time, which is why this script makes the assumption that all CPUs are vulnerable, except if the manufacturer
+explicitely stated otherwise in a verifiable public announcement.
+
+This tool has been released in the hope that it'll be useful, but don't use it to jump to conclusions about your security.
+
+EOF
+}
+
+# parse options
+opt_kernel=''
+opt_config=''
+opt_map=''
+opt_live_explicit=0
+opt_live=1
+opt_no_color=0
+opt_batch=0
+opt_verbose=1
+
+__echo()
+{
+	opt="$1"
+	shift
+	msg="$@"
+	if [ "$opt_no_color" = 1 ] ; then
+		# strip ANSI color codes
+		msg=$(/bin/echo -e  "$msg" | sed -r "s/\x1B\[([0-9]{1,2}(;[0-9]{1,2})?)?[m|K]//g")
+	fi
+	# explicitely call /bin/echo to avoid shell builtins that might not take options
+	/bin/echo $opt -e "$msg"
+}
+
+_echo()
+{
+	if [ $opt_verbose -ge $1 ]; then
+		shift
+		__echo '' "$@"
+	fi
+}
+
+_echo_nol()
+{
+	if [ $opt_verbose -ge $1 ]; then
+		shift
+		__echo -n "$@"
+	fi
+}
+
+_warn()
+{
+	_echo 0 "\033[31m${@}\033[0m"
+}
+
+_info()
+{
+	_echo 1 "$@"
+}
+
+_info_nol()
+{
+	_echo_nol 1 "$@"
+}
+
+_verbose()
+{
+	_echo 2 "$@"
+}
+
+is_cpu_vulnerable()
+{
+	# param: 1, 2 or 3 (variant)
+	# returns 1 if vulnerable, 0 if not vulnerable, 255 on error
+	# by default, everything is vulnerable, we work in a "whitelist" logic here.
+	# usage: is_cpu_vulnerable 2 && do something if vulnerable
+	variant1=0
+	variant2=0
+	variant3=0
+	if grep -q AMD /proc/cpuinfo; then
+		variant1=0
+		variant2=1
+		variant3=1
+	elif grep -qi 'CPU implementer\s*:\s*0x41' /proc/cpuinfo; then
+		# ARM
+		# reference: https://developer.arm.com/support/security-update
+		cpupart=$(awk '/CPU part/         {print $4;exit}' /proc/cpuinfo)
+		cpuarch=$(awk '/CPU architecture/ {print $3;exit}' /proc/cpuinfo)
+		if [ -n "$cpupart" -a -n "$cpuarch" ]; then
+			# Cortex-R7 and Cortex-R8 are real-time and only used in medical devices or such
+			# I can't find their CPU part number, but it's probably not that useful anyway
+			# model R7 R8 A9    A15   A17   A57   A72    A73    A75
+			# part   ?  ? 0xc09 0xc0f 0xc0e 0xd07 0xd08  0xd09  0xd0a
+			# arch  7? 7? 7     7     7     8     8      8      8
+			if [ "$cpuarch" = 7 ] && echo "$cpupart" | grep -Eq '^0x(c09|c0f|c0e)$'; then
+				# armv7 vulnerable chips
+				variant1=0
+				variant2=0
+			elif [ "$cpuarch" = 8 ] && echo "$cpupart" | grep -Eq '^0x(d07|d08|d09|d0a)$'; then
+				# armv8 vulnerable chips
+				variant1=0
+				variant2=0
+			else
+				variant1=1
+				variant2=1
+			fi
+			# for variant3, only A75 is vulnerable
+			if [ "$cpuarch" = 8 -a "$cpupart" = 0xd0a ]; then
+				variant3=0
+			else
+				variant3=1
+			fi
+		fi
+	fi
+	[ "$1" = 1 ] && return $variant1
+	[ "$1" = 2 ] && return $variant2
+	[ "$1" = 3 ] && return $variant3
+	return 255
+}
+
+show_header()
+{
+	_info "\033[1;34mSpectre and Meltdown mitigation detection tool v$VERSION\033[0m"
+	_info
+}
+
+parse_opt_file()
+{
+	# parse_opt_file option_name option_value
+	option_name="$1"
+	option_value="$2"
+	if [ -z "$option_value" ]; then
+		show_header
+		show_usage
+		echo "$0: error: --$option_name expects one parameter (a file)" >&2
+		exit 1
+	elif [ ! -e "$option_value" ]; then
+		show_header
+		echo "$0: error: couldn't find file $option_value" >&2
+		exit 1
+	elif [ ! -f "$option_value" ]; then
+		show_header
+		echo "$0: error: $option_value is not a file" >&2
+		exit 1
+	elif [ ! -e "$option_value" ]; then
+		show_header
+		echo "$0: error: couldn't read $option_value (are you root?)" >&2
+		exit 1
+	fi
+	echo "$option_value"
+	exit 0
+}
+
+while [ -n "$1" ]; do
+	if [ "$1" = "--kernel" ]; then
+		opt_kernel=$(parse_opt_file kernel "$2")
+		[ $? -ne 0 ] && exit $?
+		shift 2
+		opt_live=0
+	elif [ "$1" = "--config" ]; then
+		opt_config=$(parse_opt_file config "$2")
+		[ $? -ne 0 ] && exit $?
+		shift 2
+		opt_live=0
+	elif [ "$1" = "--map" ]; then
+		opt_map=$(parse_opt_file map "$2")
+		[ $? -ne 0 ] && exit $?
+		shift 2
+		opt_live=0
+	elif [ "$1" = "--live" ]; then
+		opt_live_explicit=1
+		shift
+	elif [ "$1" = "--no-color" ]; then
+		opt_no_color=1
+		shift
+	elif [ "$1" = "--batch" ]; then
+		opt_batch=1
+		opt_verbose=0
+		shift
+	elif [ "$1" = "-v" -o "$1" = "--verbose" ]; then
+		opt_verbose=$(expr $opt_verbose + 1)
+		shift
+	elif [ "$1" = "-h" -o "$1" = "--help" ]; then
+		show_header
+		show_usage
+		exit 0
+	elif [ "$1" = "--disclaimer" ]; then
+		show_header
+		show_disclaimer
+		exit 0
+	else
+		show_header
+		show_usage
+		echo "$0: error: unknown option '$1'"
+		exit 1
+	fi
+done
+
+show_header
 
 # print status function
 pstatus()
 {
+	if [ "$opt_no_color" = 1 ]; then
+		_info_nol "$2"
+	else
 		case "$1" in
 			red)    col="\033[101m\033[30m";;
 			green)  col="\033[102m\033[30m";;
@@ -20,11 +270,28 @@ pstatus()
 			blue)   col="\033[104m\033[30m";;
 			*)      col="";;
 		esac
-	/bin/echo -ne "$col $2 \033[0m"
-	[ -n "$3" ] && /bin/echo -n " ($3)"
-	/bin/echo
+		_info_nol "$col $2 \033[0m"
+	fi
+	[ -n "$3" ] && _info_nol " ($3)"
+	_info
 }
 
+# Print the final status of a vulnerability (incl. batch mode)
+# Arguments are: CVE UNK/OK/VULN description
+pvulnstatus()
+{
+	[ "$opt_batch" = 1 ] && _echo 0 "$1: $2 ($3)"
+	_info_nol "> \033[46m\033[30mSTATUS:\033[0m "
+	vulnstatus="$2"
+	shift 2
+	case "$vulnstatus" in
+		UNK) pstatus yellow UNKNOWN "$@";;
+		VULN) pstatus red 'VULNERABLE' "$@";;
+		OK) pstatus green 'NOT VULNERABLE' "$@";;
+	esac
+}
+
+
 # The 3 below functions are taken from the extract-linux script, available here:
 # https://github.com/torvalds/linux/blob/master/scripts/extract-vmlinux
 # The functions have been modified for better integration to this script
@@ -93,96 +360,25 @@ extract_vmlinux()
 
 # end of extract-vmlinux functions
 
-show_usage()
-{
-	cat <<EOF
-	Usage:
-		Live mode:    $0
-		Offline mode: $0 [--kernel <vmlinux_file>] [--config <kernel_config>] [--map <kernel_map_file>]
-	Options:
-		Two modes are available.
-
-		First mode is the "live" mode (default), it does its best to find information about the currently running kernel.
-		To run under this mode, just start the script without any option.
-
-		Second mode is the "offline" mode, where you can inspect a non-running kernel.
-		You'll need to specify the location of the vmlinux file, and if possible, the corresponding config and System.map files:
-
-		--kernel vmlinux_file		Specify a (possibly compressed) vmlinux file
-		--config kernel_config		Specify a kernel config file
-		--map	 kernel_map_file	Specify a kernel System.map file
-
-EOF
-}
-
-/bin/echo -e "\033[1;34mSpectre and Meltdown mitigation detection tool v$VERSION\033[0m"
-/bin/echo
-
-# parse options
-opt_kernel=''
-opt_config=''
-opt_map=''
-opt_live=1
-
-parse_opt_file()
-{
-	# parse_opt_file option_name option_value
-	option_name="$1"
-	option_value="$2"
-	if [ -z "$option_value" ]; then
+# check for mode selection inconsistency
+if [ "$opt_live_explicit" = 1 ]; then
+	if [ -n "$opt_kernel" -o -n "$opt_config" -o -n "$opt_map" ]; then
 		show_usage
-		echo "$0: error: --$option_name expects one parameter (a file)" >&2
-		exit 1
-	elif [ ! -e "$option_value" ]; then
-		echo "$0: error: couldn't find file $option_value" >&2
-		exit 1
-	elif [ ! -f "$option_value" ]; then
-		echo "$0: error: $option_value is not a file" >&2
-		exit 1
-	elif [ ! -e "$option_value" ]; then
-		echo "$0: error: couldn't read $option_value (are you root?)" >&2
+		echo "$0: error: incompatible modes specified, use either --live or --kernel/--config/--map"
 		exit 1
 	fi
-	echo "$option_value"
-	exit 0
-}
-
-while [ -n "$1" ]; do
-	if [ "$1" = "--kernel" ]; then
-		opt_kernel=$(parse_opt_file kernel "$2")
-		[ $? -ne 0 ] && exit $?
-		shift 2
-		opt_live=0
-	elif [ "$1" = "--config" ]; then
-		opt_config=$(parse_opt_file config "$2")
-		[ $? -ne 0 ] && exit $?
-		shift 2
-		opt_live=0
-	elif [ "$1" = "--map" ]; then
-		opt_map=$(parse_opt_file map "$2")
-		[ $? -ne 0 ] && exit $?
-		shift 2
-		opt_live=0
-	elif [ "$1" = "-h" -o "$1" = "--help" ]; then
-		show_usage
-		exit 0
-	else
-		show_usage
-		echo "$0: error: unknown option '$1'"
-		exit 1
 fi
-done
 
 # root check (only for live mode, for offline mode, we already checked if we could read the files)
 
 if [ "$opt_live" = 1 ]; then
 	if [ "$(id -u)" -ne 0 ]; then
-		/bin/echo -e "\033[31mNote that you should launch this script with root privileges to get accurate information.\033[0m"
-		/bin/echo -e "\033[31mWe'll proceed but you might see permission denied errors.\033[0m"
-		/bin/echo -e "\033[31mTo run it as root, you can try the following command: sudo $0\033[0m"
-		/bin/echo
+		_warn "Note that you should launch this script with root privileges to get accurate information."
+		_warn "We'll proceed but you might see permission denied errors."
+		_warn "To run it as root, you can try the following command: sudo $0"
+		_warn
 	fi
-	/bin/echo -e "Checking for vulnerabilities against live running kernel \033[35m"$(uname -s) $(uname -r) $(uname -v) $(uname -m)"\033[0m"
+	_info "Checking for vulnerabilities against live running kernel \033[35m"$(uname -s) $(uname -r) $(uname -v) $(uname -m)"\033[0m"
 
 	# try to find the image of the current running kernel
 	[ -e /boot/vmlinuz-linux       ] && opt_kernel=/boot/vmlinuz-linux
@@ -209,24 +405,24 @@ if [ "$opt_live" = 1 ]; then
 		opt_config=/boot/config-$(uname -r)
 	fi
 else
-	/bin/echo "Checking for vulnerabilities against specified kernel"
+	_info "Checking for vulnerabilities against specified kernel"
 fi
 if [ -n "$opt_kernel" ]; then
-	/bin/echo -e "Will use vmlinux image \033[35m$opt_kernel\033[0m"
+	_verbose "Will use vmlinux image \033[35m$opt_kernel\033[0m"
 else
-	/bin/echo "Will use no vmlinux image (accuracy might be reduced)"
+	_verbose "Will use no vmlinux image (accuracy might be reduced)"
 fi
 if [ -n "$dumped_config" ]; then
-	/bin/echo -e "Will use kconfig \033[35m/proc/config.gz\033[0m"
+	_verbose "Will use kconfig \033[35m/proc/config.gz\033[0m"
 elif [ -n "$opt_config" ]; then
-	/bin/echo -e "Will use kconfig \033[35m$opt_config\033[0m"
+	_verbose "Will use kconfig \033[35m$opt_config\033[0m"
 else
-	/bin/echo "Will use no kconfig (accuracy might be reduced)"
+	_verbose "Will use no kconfig (accuracy might be reduced)"
 fi
 if [ -n "$opt_map" ]; then
-	/bin/echo -e "Will use System.map file \033[35m$opt_map\033[0m"
+	_verbose "Will use System.map file \033[35m$opt_map\033[0m"
 else
-	/bin/echo "Will use no System.map file (accuracy might be reduced)"
+	_verbose "Will use no System.map file (accuracy might be reduced)"
 fi
 
 if [ -e "$opt_kernel" ]; then
@@ -236,18 +432,18 @@ if [ -e "$opt_kernel" ]; then
 		extract_vmlinux "$opt_kernel"
 	fi
 else
-	vmlinux_err="couldn't find your kernel image in /boot, if you used neboot, this is normal"
+	vmlinux_err="couldn't find your kernel image in /boot, if you used netboot, this is normal"
 fi
 if [ -z "$vmlinux" -o ! -r "$vmlinux" ]; then
 	[ -z "$vmlinux_err" ] && vmlinux_err="couldn't extract your kernel from $opt_kernel"
 fi
 
-/bin/echo
+_info
 
 ###########
 # SPECTRE 1
-/bin/echo -e "\033[1;34mCVE-2017-5753 [bounds check bypass] aka 'Spectre Variant 1'\033[0m"
-/bin/echo -n "* Checking count of LFENCE opcodes in kernel: "
+_info "\033[1;34mCVE-2017-5753 [bounds check bypass] aka 'Spectre Variant 1'\033[0m"
+_info_nol "* Checking count of LFENCE opcodes in kernel: "
 
 status=0
 if [ -n "$vmlinux_err" ]; then
@@ -273,17 +469,22 @@ else
 	fi
 fi
 
-/bin/echo -ne "> \033[46m\033[30mSTATUS:\033[0m "
-[ "$status" = 0 ] && pstatus yellow UNKNOWN
-[ "$status" = 1 ] && pstatus red   'VULNERABLE'     'heuristic to be improved when official patches become available'
-[ "$status" = 2 ] && pstatus green 'NOT VULNERABLE' 'heuristic to be improved when official patches become available'
+if ! is_cpu_vulnerable 1; then
+	pvulnstatus CVE-2017-5753 OK "your CPU vendor reported your CPU model as not vulnerable"
+else
+	case "$status" in
+		0) pvulnstatus CVE-2017-5753 UNK "impossible to check ${vmlinux}";;
+		1) pvulnstatus CVE-2017-5753 VULN 'heuristic to be improved when official patches become available';;
+		2) pvulnstatus CVE-2017-5753 OK 'heuristic to be improved when official patches become available';;
+	esac
+fi
 
 ###########
 # VARIANT 2
-/bin/echo
-/bin/echo -e "\033[1;34mCVE-2017-5715 [branch target injection] aka 'Spectre Variant 2'\033[0m"
-/bin/echo "* Mitigation 1"
-/bin/echo -n "*   Hardware (CPU microcode) support for mitigation: "
+_info
+_info "\033[1;34mCVE-2017-5715 [branch target injection] aka 'Spectre Variant 2'\033[0m"
+_info "* Mitigation 1"
+_info_nol "*   Hardware (CPU microcode) support for mitigation: "
 if [ ! -e /dev/cpu/0/msr ]; then
 	# try to load the module ourselves (and remember it so we can rmmod it afterwards)
 	modprobe msr 2>/dev/null && insmod_msr=1
@@ -307,7 +508,7 @@ if [ "$insmod_msr" = 1 ]; then
 	rmmod msr 2>/dev/null
 fi
 
-/bin/echo -n "*   Kernel support for IBRS: "
+_info_nol "*   Kernel support for IBRS: "
 if [ "$opt_live" = 1 ]; then
 	if [ ! -e /sys/kernel/debug/sched_features ]; then
 		# try to mount the debugfs hierarchy ourselves and remember it to umount afterwards
@@ -335,7 +536,7 @@ if [ "$ibrs_supported" != 1 ]; then
 	pstatus red NO
 fi
 
-/bin/echo -n "*   IBRS enabled for Kernel space: "
+_info_nol "*   IBRS enabled for Kernel space: "
 if [ "$opt_live" = 1 ]; then
 	# 0 means disabled
 	# 1 is enabled only for kernel space
@@ -350,7 +551,7 @@ else
 	pstatus blue N/A "not testable in offline mode"
 fi
 
-/bin/echo -n "*   IBRS enabled for User space: "
+_info_nol "*   IBRS enabled for User space: "
 if [ "$opt_live" = 1 ]; then
 	case "$ibrs_enabled" in
 		"") [ "$ibrs_supported" = 1 ] && pstatus yellow UNKNOWN || pstatus red NO;;
@@ -362,8 +563,8 @@ else
 	pstatus blue N/A "not testable in offline mode"
 fi
 
-/bin/echo "* Mitigation 2"
-/bin/echo -n "*   Kernel compiled with retpoline option: "
+_info "* Mitigation 2"
+_info_nol "*   Kernel compiled with retpoline option: "
 # We check the RETPOLINE kernel options
 if [ -r "$opt_config" ]; then
 	if grep -q '^CONFIG_RETPOLINE=y' "$opt_config"; then
@@ -376,7 +577,7 @@ else
 	pstatus yellow UNKNOWN "couldn't read your kernel configuration"
 fi
 
-/bin/echo -n "*   Kernel compiled with a retpoline-aware compiler: "
+_info_nol "*   Kernel compiled with a retpoline-aware compiler: "
 # Now check if the compiler used to compile the kernel knows how to insert retpolines in generated asm
 # For gcc, this is -mindirect-branch=thunk-extern (detected by the kernel makefiles)
 # See gcc commit https://github.com/hjl-tools/gcc/commit/23b517d4a67c02d3ef80b6109218f2aadad7bd79
@@ -412,35 +613,34 @@ else
 	pstatus yellow UNKNOWN "couldn't find your kernel image or System.map"
 fi
 
-/bin/echo -ne "> \033[46m\033[30mSTATUS:\033[0m "
-if grep -q AMD /proc/cpuinfo; then
-	pstatus green "NOT VULNERABLE" "your CPU is not vulnerable as per the vendor"
+if ! is_cpu_vulnerable 2; then
+	pvulnstatus CVE-2017-5715 OK "your CPU vendor reported your CPU model as not vulnerable"
 elif [ "$retpoline" = 1 -a "$retpoline_compiler" = 1 ]; then
-	pstatus green "NOT VULNERABLE" "retpoline mitigate the vulnerability"
+	pvulnstatus CVE-2017-5715 OK "retpoline mitigate the vulnerability"
 elif [ "$opt_live" = 1 ]; then
 	if [ "$ibrs_enabled" = 1 -o "$ibrs_enabled" = 2 ]; then
-		pstatus green "NOT VULNERABLE" "IBRS mitigates the vulnerability"
+		pvulnstatus CVE-2017-5715 OK "IBRS mitigates the vulnerability"
 	else
-		pstatus red VULNERABLE "IBRS hardware + kernel support OR kernel with retpoline are needed to mitigate the vulnerability"
+		pvulnstatus CVE-2017-5715 VULN "IBRS hardware + kernel support OR kernel with retpoline are needed to mitigate the vulnerability"
 	fi
 else
 	if [ "$ibrs_supported" = 1 ]; then
-		pstatus green "NOT VULNERABLE" "offline mode: IBRS will mitigate the vulnerability if enabled at runtime"
+		pvulnstatus CVE-2017-5715 OK "offline mode: IBRS will mitigate the vulnerability if enabled at runtime"
 	else
-		pstatus red VULNERABLE "IBRS hardware + kernel support OR kernel with retpoline are needed to mitigate the vulnerability"
+		pvulnstatus CVE-2017-5715 VULN "IBRS hardware + kernel support OR kernel with retpoline are needed to mitigate the vulnerability"
 	fi
 fi
 
 ##########
 # MELTDOWN
-/bin/echo
-/bin/echo -e "\033[1;34mCVE-2017-5754 [rogue data cache load] aka 'Meltdown' aka 'Variant 3'\033[0m"
-/bin/echo -n "* Kernel supports Page Table Isolation (PTI): "
+_info
+_info "\033[1;34mCVE-2017-5754 [rogue data cache load] aka 'Meltdown' aka 'Variant 3'\033[0m"
+_info_nol "* Kernel supports Page Table Isolation (PTI): "
 kpti_support=0
 kpti_can_tell=0
 if [ -n "$opt_config" ]; then
 	kpti_can_tell=1
-	if grep -Eq '^\(CONFIG_PAGE_TABLE_ISOLATION\|CONFIG_KAISER\)=y' "$opt_config"; then
+	if grep -Eq '^(CONFIG_PAGE_TABLE_ISOLATION|CONFIG_KAISER)=y' "$opt_config"; then
 		kpti_support=1
 	fi
 fi
@@ -473,7 +673,7 @@ else
 	pstatus yellow UNKNOWN "couldn't read your kernel configuration nor System.map file"
 fi
 
-/bin/echo -n "* PTI enabled and active: "
+_info_nol "* PTI enabled and active: "
 if [ "$opt_live" = 1 ]; then
 	if grep ^flags /proc/cpuinfo | grep -qw pti; then
 		# vanilla PTI patch sets the 'pti' flag in cpuinfo
@@ -504,23 +704,24 @@ if [ "$mounted_debugfs" = 1 ]; then
 	umount /sys/kernel/debug
 fi
 
-/bin/echo -ne "> \033[46m\033[30mSTATUS:\033[0m "
-if grep -q AMD /proc/cpuinfo; then
-	pstatus green "NOT VULNERABLE" "your CPU is not vulnerable as per the vendor"
+if ! is_cpu_vulnerable 3; then
+	pvulnstatus CVE-2017-5754 OK "your CPU vendor reported your CPU model as not vulnerable"
 elif [ "$opt_live" = 1 ]; then
 	if [ "$kpti_enabled" = 1 ]; then
-		pstatus green "NOT VULNERABLE" "PTI mitigates the vulnerability"
+		pvulnstatus CVE-2017-5754 OK "PTI mitigates the vulnerability"
 	else
-		pstatus red "VULNERABLE" "PTI is needed to mitigate the vulnerability"
+		pvulnstatus CVE-2017-5754 VULN "PTI is needed to mitigate the vulnerability"
 	fi
 else
 	if [ "$kpti_support" = 1 ]; then
-		pstatus green "NOT VULNERABLE" "offline mode: PTI will mitigate the vulnerability if enabled at runtime"
+		pvulnstatus CVE-2017-5754 OK "offline mode: PTI will mitigate the vulnerability if enabled at runtime"
 	else
-		pstatus red "VULNERABLE" "PTI is needed to mitigate the vulnerability"
+		pvulnstatus CVE-2017-5754 VULN "PTI is needed to mitigate the vulnerability"
 	fi
 fi
 
-/bin/echo
+_info
+
+_info "A false sense of security is worst than no security at all, see --disclaimer"
 
 [ -n "$dumped_config" ] && rm -f "$dumped_config"