#! /bin/sh
# SPDX-License-Identifier: GPL-3.0-only
# vim: set ts=4 sw=4 sts=4 noet:
#
# Spectre & Meltdown checker
#
# Check for the latest version at:
# https://github.com/speed47/spectre-meltdown-checker
# git clone https://github.com/speed47/spectre-meltdown-checker.git
# or wget https://meltdown.ovh -O spectre-meltdown-checker.sh
# or curl -L https://meltdown.ovh -o spectre-meltdown-checker.sh
#
# Stephane Lesimple
#
VERSION='0.46+'

trap 'exit_cleanup' EXIT
trap '_warn "interrupted, cleaning up..."; exit_cleanup; exit 1' INT
exit_cleanup()
{
	saved_ret=$?
	# cleanup the temp decompressed config & kernel image
	[ -n "${dumped_config:-}" ] && [ -f "$dumped_config" ] && rm -f "$dumped_config"
	[ -n "${kerneltmp:-}"     ] && [ -f "$kerneltmp"     ] && rm -f "$kerneltmp"
	[ -n "${kerneltmp2:-}"    ] && [ -f "$kerneltmp2"    ] && rm -f "$kerneltmp2"
	[ -n "${mcedb_tmp:-}"     ] && [ -f "$mcedb_tmp"     ] && rm -f "$mcedb_tmp"
	[ -n "${intel_tmp:-}"     ] && [ -d "$intel_tmp"     ] && rm -rf "$intel_tmp"
	[ -n "${linuxfw_tmp:-}"   ] && [ -f "$linuxfw_tmp"   ] && rm -f "$linuxfw_tmp"
	[ "${mounted_debugfs:-}" = 1 ] && umount /sys/kernel/debug 2>/dev/null
	[ "${mounted_procfs:-}"  = 1 ] && umount "$procfs" 2>/dev/null
	[ "${insmod_cpuid:-}"    = 1 ] && rmmod cpuid 2>/dev/null
	[ "${insmod_msr:-}"      = 1 ] && rmmod msr 2>/dev/null
	[ "${kldload_cpuctl:-}"  = 1 ] && kldunload cpuctl 2>/dev/null
	[ "${kldload_vmm:-}"     = 1 ] && kldunload vmm    2>/dev/null
	exit $saved_ret
}

# if we were git clone'd, adjust VERSION
if [ -d "$(dirname "$0")/.git" ] && command -v git >/dev/null 2>&1; then
	describe=$(git -C "$(dirname "$0")" describe --tags --dirty 2>/dev/null)
	[ -n "$describe" ] && VERSION=$(echo "$describe" | sed -e s/^v//)
fi

show_usage()
{
	# shellcheck disable=SC2086
	cat <<EOF
	Usage:
		Live mode (auto):   $(basename $0) [options]
		Live mode (manual): $(basename $0) [options] <[--kernel <kimage>] [--config <kconfig>] [--map <mapfile>]> --live
		Offline mode:       $(basename $0) [options] <[--kernel <kimage>] [--config <kconfig>] [--map <mapfile>]>

	Modes:
		Two modes are available.

		First mode is the "live" mode (default), it does its best to find information about the currently running kernel.
		To run under this mode, just start the script without any option (you can also use --live explicitly)

		Second mode is the "offline" mode, where you can inspect a non-running kernel.
		This mode is automatically enabled when you specify the location of the kernel file, config and System.map files:

		--kernel kernel_file	specify a (possibly compressed) Linux or BSD kernel file
		--config kernel_config	specify a kernel config file (Linux only)
		--map kernel_map_file	specify a kernel System.map file (Linux only)

		If you want to use live mode while specifying the location of the kernel, config or map file yourself,
		you can add --live to the above options, to tell the script to run in live mode instead of the offline mode,
		which is enabled by default when at least one file is specified on the command line.

	Options:
		--no-color		don't use color codes
		--verbose, -v		increase verbosity level, possibly several times
		--explain		produce an additional human-readable explanation of actions to take to mitigate a vulnerability
		--paranoid		require IBPB to deem Variant 2 as mitigated
					also require SMT disabled + unconditional L1D flush to deem Foreshadow-NG VMM as mitigated
					also require SMT disabled to deem MDS vulnerabilities mitigated

		--no-sysfs		don't use the /sys interface even if present [Linux]
		--sysfs-only		only use the /sys interface, don't run our own checks [Linux]
		--coreos		special mode for CoreOS (use an ephemeral toolbox to inspect kernel) [Linux]

		--arch-prefix PREFIX	specify a prefix for cross-inspecting a kernel of a different arch, for example "aarch64-linux-gnu-",
					so that invoked tools will be prefixed with this (i.e. aarch64-linux-gnu-objdump)
		--batch text		produce machine readable output, this is the default if --batch is specified alone
		--batch short		produce only one line with the vulnerabilities separated by spaces
		--batch json		produce JSON output formatted for Puppet, Ansible, Chef...
		--batch nrpe		produce machine readable output formatted for NRPE
		--batch prometheus      produce output for consumption by prometheus-node-exporter

		--variant VARIANT	specify which variant you'd like to check, by default all variants are checked.
					can be used multiple times (e.g. --variant 3a --variant l1tf)
					for a list of supported VARIANT parameters, use --variant help
		--cve CVE		specify which CVE you'd like to check, by default all supported CVEs are checked
					can be used multiple times (e.g. --cve CVE-2017-5753 --cve CVE-2020-0543)
		--hw-only		only check for CPU information, don't check for any variant
		--no-hw			skip CPU information and checks, if you're inspecting a kernel not to be run on this host
		--vmm [auto,yes,no]	override the detection of the presence of a hypervisor, default: auto
		--no-intel-db		don't use the builtin Intel DB of affected processors
		--allow-msr-write	allow probing for write-only MSRs, this might produce kernel logs or be blocked by your system
		--cpu [#,all]		interact with CPUID and MSR of CPU core number #, or all (default: CPU core 0)
		--update-fwdb		update our local copy of the CPU microcodes versions database (using the awesome
					MCExtractor project and the Intel firmwares GitHub repository)
		--update-builtin-fwdb	same as --update-fwdb but update builtin DB inside the script itself
		--dump-mock-data	used to mimick a CPU on an other system, mainly used to help debugging this script

	Return codes:
		0 (not vulnerable), 2 (vulnerable), 3 (unknown), 255 (error)

	IMPORTANT:
	A false sense of security is worse than no security at all.
	Please use the --disclaimer option to understand exactly what this script does.

EOF
}

show_disclaimer()
{
	cat <<EOF
Disclaimer:

This tool does its best to determine whether your system is immune (or has proper mitigations in place) for the
collectively named "transient execution" (aka "speculative execution") vulnerabilities that started to appear
since early 2018 with the infamous Spectre & Meltdown.

This tool does NOT attempt to run any kind of exploit, and can't 100% guarantee that your system is secure,
but rather helps you verifying whether your system has the known correct mitigations in place.
However, some mitigations could also exist in your kernel that this script doesn't know (yet) how to detect, or it might
falsely detect mitigations that in the end don't work as expected (for example, on backported or modified kernels).

Your system affectability to a given vulnerability depends on your CPU model and CPU microcode version, whereas the
mitigations in place depend on your CPU (model and microcode), your kernel version, and both the runtime configuration
of your CPU (through bits set through the MSRs) and your kernel. The script attempts to explain everything for each
vulnerability, so you know where your system stands. For a given vulnerability, detailed information is sometimes
available using the \`--explain\` switch.

Please also note that for the Spectre-like vulnerabilities, all software can possibly be exploited, in which case
this tool only verifies that the kernel (which is the core of the system) you're using has the proper protections
in place. Verifying all the other software is out of the scope of this tool, as it can't be done in a simple way.
As a general measure, ensure you always have the most up to date stable versions of all the software you use,
especially for those who are exposed to the world, such as network daemons and browsers.

For more information and answers to related questions, please refer to the FAQ.md file.

This tool has been released in the hope that it'll be useful, but don't use it to jump to conclusions about your security.

EOF
}

os=$(uname -s)

# parse options
opt_kernel=''
opt_config=''
opt_map=''
opt_live=-1
opt_no_color=0
opt_batch=0
opt_batch_format='text'
opt_verbose=1
opt_cve_list=''
opt_cve_all=1
opt_no_sysfs=0
opt_sysfs_only=0
opt_coreos=0
opt_arch_prefix=''
opt_hw_only=0
opt_no_hw=0
opt_vmm=-1
opt_allow_msr_write=0
opt_cpu=0
opt_explain=0
opt_paranoid=0
opt_mock=0
opt_intel_db=1

global_critical=0
global_unknown=0
nrpe_vuln=''

supported_cve_list='
CVE-2017-5753
CVE-2017-5715
CVE-2017-5754
CVE-2018-3640
CVE-2018-3639
CVE-2018-3615
CVE-2018-3620
CVE-2018-3646
CVE-2018-12126
CVE-2018-12130
CVE-2018-12127
CVE-2019-11091
CVE-2019-11135
CVE-2018-12207
CVE-2020-0543
CVE-2023-20593
CVE-2022-40982
CVE-2023-20569
CVE-2023-23583'

# find a sane command to print colored messages, we prefer `printf` over `echo`
# because `printf` behavior is more standard across Linux/BSD
# we'll try to avoid using shell builtins that might not take options
echo_cmd_type='echo'
# ignore SC2230 here because `which` ignores builtins while `command -v` doesn't, and
# we don't want builtins here. Even if `which` is not installed, we'll fallback to the
# `echo` builtin anyway, so this is safe.
# shellcheck disable=SC2230
if command -v printf >/dev/null 2>&1; then
	echo_cmd=$(command -v printf)
	echo_cmd_type='printf'
elif which echo >/dev/null 2>&1; then
	echo_cmd=$(which echo)
else
	# maybe the `which` command is broken?
	[ -x /bin/echo        ] && echo_cmd=/bin/echo
	# for Android
	[ -x /system/bin/echo ] && echo_cmd=/system/bin/echo
fi
# still empty? fallback to builtin
[ -z "$echo_cmd" ] && echo_cmd='echo'
__echo()
{
	opt="$1"
	shift
	_msg="$*"

	if [ "$opt_no_color" = 1 ] ; then
		# strip ANSI color codes
		# some sed versions (i.e. toybox) can't seem to handle
		# \033 aka \x1B correctly, so do it for them.
		if [ "$echo_cmd_type" = printf ]; then
			_interpret_chars=''
		else
			_interpret_chars='-e'
		fi
		_ctrlchar=$($echo_cmd $_interpret_chars "\033")
		_msg=$($echo_cmd $_interpret_chars "$_msg" | sed -r "s/$_ctrlchar\[([0-9][0-9]?(;[0-9][0-9]?)?)?m//g")
	fi
	if [ "$echo_cmd_type" = printf ]; then
		if [ "$opt" = "-n" ]; then
			$echo_cmd "$_msg"
		else
			$echo_cmd "$_msg\n"
		fi
	else
		# shellcheck disable=SC2086
		$echo_cmd $opt -e "$_msg"
	fi
}

_echo()
{
	if [ "$opt_verbose" -ge "$1" ]; then
		shift
		__echo '' "$*"
	fi
}

_echo_nol()
{
	if [ "$opt_verbose" -ge "$1" ]; then
		shift
		__echo -n "$*"
	fi
}

_warn()
{
	_echo 0 "\033[31m$*\033[0m" >&2
}

_info()
{
	_echo 1 "$*"
}

_info_nol()
{
	_echo_nol 1 "$*"
}

_verbose()
{
	_echo 2 "$*"
}

_verbose_nol()
{
	_echo_nol 2 "$*"
}

_debug()
{
	_echo 3 "\033[34m(debug) $*\033[0m"
}

explain()
{
	if [ "$opt_explain" = 1 ] ; then
		_info ''
		_info "> \033[41m\033[30mHow to fix:\033[0m $*"
	fi
}

cve2name()
{
	case "$1" in
		CVE-2017-5753)	echo "Spectre Variant 1, bounds check bypass";;
		CVE-2017-5715)	echo "Spectre Variant 2, branch target injection";;
		CVE-2017-5754)	echo "Variant 3, Meltdown, rogue data cache load";;
		CVE-2018-3640)	echo "Variant 3a, rogue system register read";;
		CVE-2018-3639)	echo "Variant 4, speculative store bypass";;
		CVE-2018-3615)	echo "Foreshadow (SGX), L1 terminal fault";;
		CVE-2018-3620)	echo "Foreshadow-NG (OS), L1 terminal fault";;
		CVE-2018-3646)	echo "Foreshadow-NG (VMM), L1 terminal fault";;
		CVE-2018-12126) echo "Fallout, microarchitectural store buffer data sampling (MSBDS)";;
		CVE-2018-12130) echo "ZombieLoad, microarchitectural fill buffer data sampling (MFBDS)";;
		CVE-2018-12127) echo "RIDL, microarchitectural load port data sampling (MLPDS)";;
		CVE-2019-11091) echo "RIDL, microarchitectural data sampling uncacheable memory (MDSUM)";;
		CVE-2019-11135) echo "ZombieLoad V2, TSX Asynchronous Abort (TAA)";;
		CVE-2018-12207) echo "No eXcuses, iTLB Multihit, machine check exception on page size changes (MCEPSC)";;
		CVE-2020-0543) echo "Special Register Buffer Data Sampling (SRBDS)";;
		CVE-2023-20593) echo "Zenbleed, cross-process information leak";;
		CVE-2022-40982) echo "Downfall, gather data sampling (GDS)";;
		CVE-2023-20569) echo "Inception, return address security (RAS)";;
		CVE-2023-23583) echo "Reptar, redundant prefix issue";;
		*) echo "$0: error: invalid CVE '$1' passed to cve2name()" >&2; exit 255;;
	esac
}

is_cpu_affected_cached=0
_is_cpu_affected_cached()
{
	# shellcheck disable=SC2086
	case "$1" in
		CVE-2017-5753) return $variant1;;
		CVE-2017-5715) return $variant2;;
		CVE-2017-5754) return $variant3;;
		CVE-2018-3640) return $variant3a;;
		CVE-2018-3639) return $variant4;;
		CVE-2018-3615) return $variantl1tf_sgx;;
		CVE-2018-3620) return $variantl1tf;;
		CVE-2018-3646) return $variantl1tf;;
		CVE-2018-12126) return $variant_msbds;;
		CVE-2018-12130) return $variant_mfbds;;
		CVE-2018-12127) return $variant_mlpds;;
		CVE-2019-11091) return $variant_mdsum;;
		CVE-2019-11135) return $variant_taa;;
		CVE-2018-12207) return $variant_itlbmh;;
		CVE-2020-0543) return $variant_srbds;;
		CVE-2023-20593) return $variant_zenbleed;;
		CVE-2022-40982) return $variant_downfall;;
		CVE-2023-20569) return $variant_inception;;
		CVE-2023-23583) return $variant_reptar;;
		*) echo "$0: error: invalid variant '$1' passed to is_cpu_affected()" >&2; exit 255;;
	esac
}

is_cpu_affected()
{
	# param: one of the $supported_cve_list items
	# returns 0 if affected, 1 if not affected
	# (note that in shell, a return of 0 is success)
	# by default, everything is affected, we work in a "whitelist" logic here.
	# usage: is_cpu_affected CVE-xxxx-yyyy && do something if affected

	# if CPU is Intel and is in our dump of the Intel official affected CPUs page, use it:
	if is_intel; then
		cpuid_hex=$(printf "0x%08X" $(( cpu_cpuid )) )
		if [ "${intel_line:-}" = "no" ]; then
			_debug "is_cpu_affected: $cpuid_hex not in Intel database (cached)"
		elif [ -z "$intel_line" ]; then
			intel_line=$(read_inteldb | grep -F "$cpuid_hex," | head -n1)
			if [ -z "$intel_line" ]; then
				intel_line=no
				_debug "is_cpu_affected: $cpuid_hex not in Intel database"
			fi
		fi
		if [ "$intel_line" != "no" ]; then
			_result=$(echo "$intel_line" | grep -Eo ,"$(echo "$1" | cut -c5-)"'=[^,]+' | cut -d= -f2)
			_debug "is_cpu_affected: inteldb for $1 says '$_result'"

			# handle special case for Foreshadow SGX (CVE-2018-3615):
			# even if we are affected to L1TF (CVE-2018-3620/CVE-2018-3646), if there's no SGX on our CPU,
			# then we're not affected to the original Foreshadow.
			if [ "$1" = "CVE-2018-3615" ] && [ "$cpuid_sgx" = 0 ]; then
				# not affected
				return 1
			fi
			# /special case

			if [ "$_result" = "N" ]; then
				# not affected
				return 1
			elif [ -n "$_result" ]; then
				# non-empty string != N means affected
				return 0
			fi
		fi
	fi

	# Otherwise, do it ourselves

	if [ "$is_cpu_affected_cached" = 1 ]; then
		_is_cpu_affected_cached "$1"
		return $?
	fi

	variant1=''
	variant2=''
	variant3=''
	variant3a=''
	variant4=''
	variantl1tf=''
	variant_msbds=''
	variant_mfbds=''
	variant_mlpds=''
	variant_mdsum=''
	variant_taa=''
	variant_itlbmh=''
	variant_srbds=''
	# Zenbleed and Inception are both AMD specific, look for "is_amd" below:
	variant_zenbleed=immune
	variant_inception=immune
	# Downfall & Reptar are Intel specific, look for "is_intel" below:
	variant_downfall=immune
	variant_reptar=immune

	if is_cpu_mds_free; then
		[ -z "$variant_msbds" ] && variant_msbds=immune
		[ -z "$variant_mfbds" ] && variant_mfbds=immune
		[ -z "$variant_mlpds" ] && variant_mlpds=immune
		[ -z "$variant_mdsum" ] && variant_mdsum=immune
		_debug "is_cpu_affected: cpu not affected by Microarchitectural Data Sampling"
	fi

	if is_cpu_taa_free; then
		[ -z "$variant_taa" ] && variant_taa=immune
		_debug "is_cpu_affected: cpu not affected by TSX Asynhronous Abort"
	fi

	if is_cpu_srbds_free; then
		[ -z "$variant_srbds" ] && variant_srbds=immune
		_debug "is_cpu_affected: cpu not affected by Special Register Buffer Data Sampling"
	fi

	if is_cpu_specex_free; then
		variant1=immune
		variant2=immune
		variant3=immune
		variant3a=immune
		variant4=immune
		variantl1tf=immune
		variant_msbds=immune
		variant_mfbds=immune
		variant_mlpds=immune
		variant_mdsum=immune
		variant_taa=immune
		variant_srbds=immune
	elif is_intel; then
		# Intel
		# https://github.com/crozone/SpectrePoC/issues/1 ^F E5200 => spectre 2 not affected
		# https://github.com/paboldin/meltdown-exploit/issues/19 ^F E5200 => meltdown affected
		# model name : Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz
		if echo "$cpu_friendly_name" | grep -qE 'Pentium\(R\) Dual-Core[[:space:]]+CPU[[:space:]]+E[0-9]{4}K?'; then
			variant1=vuln
			[ -z "$variant2" ] && variant2=immune
			variant3=vuln
		fi
		if [ "$capabilities_rdcl_no" = 1 ]; then
			# capability bit for future Intel processor that will explicitly state
			# that they're not affected to Meltdown
			# this var is set in check_cpu()
			[ -z "$variant3" ]    && variant3=immune
			[ -z "$variantl1tf" ] && variantl1tf=immune
			_debug "is_cpu_affected: RDCL_NO is set so not vuln to meltdown nor l1tf"
		fi
		if [ "$capabilities_ssb_no" = 1 ]; then
			# capability bit for future Intel processor that will explicitly state
			# that they're not affected to Variant 4
			# this var is set in check_cpu()
			[ -z "$variant4" ] && variant4=immune
			_debug "is_cpu_affected: SSB_NO is set so not vuln to variant4"
		fi
		if is_cpu_ssb_free; then
			[ -z "$variant4" ] && variant4=immune
			_debug "is_cpu_affected: cpu not affected by speculative store bypass so not vuln to variant4"
		fi
		# variant 3a
		if [ "$cpu_family" = 6 ]; then
			if [ "$cpu_model" = "$INTEL_FAM6_XEON_PHI_KNL" ] || [ "$cpu_model" = "$INTEL_FAM6_XEON_PHI_KNM" ]; then
				_debug "is_cpu_affected: xeon phi immune to variant 3a"
				[ -z "$variant3a" ] && variant3a=immune
			elif [ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT_MID" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT_D" ]; then
					# https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00115.html
					# https://github.com/speed47/spectre-meltdown-checker/issues/310
					# => silvermont CPUs (aka cherry lake for tablets and brawsell for mobile/desktop) don't seem to be affected
					# => goldmont ARE affected
					_debug "is_cpu_affected: silvermont immune to variant 3a"
					[ -z "$variant3a" ] && variant3a=immune
			fi
		fi
		# L1TF (RDCL_NO already checked above)
		if [ "$cpu_family" = 6 ]; then
			if [ "$cpu_model" = "$INTEL_FAM6_ATOM_SALTWELL"          ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SALTWELL_TABLET" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SALTWELL_MID" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_BONNELL" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_BONNELL_MID" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT_MID" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT_D" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_AIRMONT" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_AIRMONT_MID" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_AIRMONT_NP" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_GOLDMONT" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_GOLDMONT_D" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_GOLDMONT_PLUS" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_TREMONT_D" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_XEON_PHI_KNL"     ] || \
				[ "$cpu_model" = "$INTEL_FAM6_XEON_PHI_KNM" ]; then

				_debug "is_cpu_affected: intel family 6 but model known to be immune to l1tf"
				[ -z "$variantl1tf" ] && variantl1tf=immune
			else
				_debug "is_cpu_affected: intel family 6 is vuln to l1tf"
				variantl1tf=vuln
			fi
		elif [ "$cpu_family" -lt 6 ]; then
			_debug "is_cpu_affected: intel family < 6 is immune to l1tf"
			[ -z "$variantl1tf" ] && variantl1tf=immune
		fi
		# Downfall
		if [ "$capabilities_gds_no" = 1 ]; then
			# capability bit for future Intel processors that will explicitly state
			# that they're unaffected by GDS. Also set by hypervisors on virtual CPUs
			# so that the guest kernel doesn't try to mitigate GDS when it's already mitigated on the host
			_debug "is_cpu_affected: downfall: not affected (GDS_NO)"
		elif [ "$cpu_family" = 6 ]; then
			# list from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=64094e7e3118aff4b0be8ff713c242303e139834
			set -u
			if [ "$cpu_model" = "$INTEL_FAM6_SKYLAKE_X" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_KABYLAKE_L" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_KABYLAKE" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ICELAKE_L" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ICELAKE_D" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ICELAKE_X" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_COMETLAKE" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_COMETLAKE_L" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_TIGERLAKE_L" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_TIGERLAKE" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ROCKETLAKE" ]; then
				_debug "is_cpu_affected: downfall: affected"
				variant_downfall=vuln
			elif [ "$has_avx2" = 0 ] && [ "$has_avx512" = 0 ]; then
				_debug "is_cpu_affected: downfall: no avx; immune"
			else
				# old Intel CPU (not in their DB), not listed as being affected by the Linux kernel,
				# but with AVX2 or AVX512: unclear for now
				_debug "is_cpu_affected: downfall: unclear, defaulting to non-affected for now"
			fi
			set +u
		fi
		# Reptar
		# the only way to know whether a CPU is vuln, is to check whether there is a known ucode update for it,
		# as the mitigation is only ucode-based and there's no flag exposed by the kernel or by an updated ucode.
		# we have to hardcode the truthtable of affected CPUs vs updated ucodes...
		# https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/advisory-guidance/redundant-prefix-issue.html
		# list taken from:
		# https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/commit/ece0d294a29a1375397941a4e6f2f7217910bc89#diff-e6fad0f2abbac6c9603b2e8f88fe1d151a83de708aeca1c1d93d881c958ecba4R26
		# both pages have a lot of inconsistencies, I've tried to fix the errors the best I could, the logic being: if it's not in the
		# blog page, then the microcode update in the commit is not related to reptar, if microcode versions differ, then the one in github is correct,
		# if a stepping exists in the blog page but not in the commit, then the blog page is right
		reptar_ucode_list='
06-97-02/07,00000032
06-97-05/07,00000032
06-9a-03/80,00000430
06-9a-04/80,00000430
06-6c-01/10,01000268
06-6a-06/87,0d0003b9
06-7e-05/80,000000c2
06-ba-02/e0,0000411c
06-b7-01/32,0000011d
06-a7-01/02,0000005d
06-bf-05/07,00000032
06-bf-02/07,00000032
06-ba-03/e0,0000411c
06-8f-08/87,2b0004d0
06-8f-07/87,2b0004d0
06-8f-06/87,2b0004d0
06-8f-05/87,2b0004d0
06-8f-04/87,2b0004d0
06-8f-08/10,2c000290
06-8c-01/80,000000b4
06-8c-00/ff,000000b4
06-8d-01/c2,0000004e
06-8d-00/c2,0000004e
06-8c-02/c2,00000034
'
		for tuple in $reptar_ucode_list; do
			fixed_ucode_ver=$(( 0x$(echo "$tuple" | cut -d, -f2) ))
			affected_fmspi=$(echo "$tuple" | cut -d, -f1)
			affected_fms=$(echo "$affected_fmspi" | cut -d/ -f1)
			ucode_platformid_mask=0x$(echo "$affected_fmspi" | cut -d/ -f2)
			affected_cpuid=$(fms2cpuid \
				0x"$(echo "$affected_fms" | cut -d- -f1)" \
				0x"$(echo "$affected_fms" | cut -d- -f2)" \
				0x"$(echo "$affected_fms" | cut -d- -f3)" \
			)
			if [ "$cpu_cpuid" = "$affected_cpuid" ] && [ $((cpu_platformid & ucode_platformid_mask)) -gt 0 ]; then
				# this is not perfect as Intel never tells about their EOL CPUs, so more CPUs might be affected but there's no way to tell
				variant_reptar=vuln
				reptar_fixed_ucode_version=$fixed_ucode_ver
				break
			fi
		done


	elif is_amd || is_hygon; then
		# AMD revised their statement about variant2 => affected
		# https://www.amd.com/en/corporate/speculative-execution
		variant1=vuln
		variant2=vuln
		[ -z "$variant3"  ] && variant3=immune
		# https://www.amd.com/en/corporate/security-updates
		# "We have not identified any AMD x86 products susceptible to the Variant 3a vulnerability in our analysis to-date."
		[ -z "$variant3a" ] && variant3a=immune
		if is_cpu_ssb_free; then
			[ -z "$variant4" ] && variant4=immune
			_debug "is_cpu_affected: cpu not affected by speculative store bypass so not vuln to variant4"
		fi
		variantl1tf=immune

		# Zenbleed
		amd_legacy_erratum "$(amd_model_range 0x17 0x30 0x0 0x4f 0xf)" && variant_zenbleed=vuln
		amd_legacy_erratum "$(amd_model_range 0x17 0x60 0x0 0x7f 0xf)" && variant_zenbleed=vuln
		amd_legacy_erratum "$(amd_model_range 0x17 0xa0 0x0 0xaf 0xf)" && variant_zenbleed=vuln

		# Inception (according to kernel, zen 1 to 4)
		if [ "$cpu_family" = $(( 0x17 )) ] || [ "$cpu_family" = $(( 0x19 )) ]; then
			variant_inception=vuln
		fi

	elif [ "$cpu_vendor" = CAVIUM ]; then
		variant3=immune
		variant3a=immune
		variantl1tf=immune
	elif [ "$cpu_vendor" = PHYTIUM ]; then
		variant3=immune
		variant3a=immune
		variantl1tf=immune
	elif [ "$cpu_vendor" = ARM ]; then
		# ARM
		# reference: https://developer.arm.com/support/security-update
		# some devices (phones or other) have several ARMs and as such different part numbers,
		# an example is "bigLITTLE". we shouldn't rely on the first CPU only, so we check the whole list
		i=0
		for cpupart in $cpu_part_list
		do
			i=$(( i + 1 ))
			# do NOT quote $cpu_arch_list below
			# shellcheck disable=SC2086
			cpuarch=$(echo $cpu_arch_list | awk '{ print $'$i' }')
			_debug "checking cpu$i: <$cpupart> <$cpuarch>"
			# some kernels report AArch64 instead of 8
			[ "$cpuarch" = "AArch64" ] && cpuarch=8
			if [ -n "$cpupart" ] && [ -n "$cpuarch" ]; then
				# Cortex-R7 and Cortex-R8 are real-time and only used in medical devices or such
				# I can't find their CPU part number, but it's probably not that useful anyway
				# model R7 R8 A8  A9  A12 A15 A17 A57 A72 A73 A75 A76 A77 Neoverse-N1 Neoverse-V1 Neoverse-N1 Neoverse-V2 
				# part   ?  ? c08 c09 c0d c0f c0e d07 d08 d09 d0a d0b d0d d0c         d40	  d49	      d4f
				# arch  7? 7? 7   7   7   7   7   8   8   8   8   8   8   8           8		  8	      8
				#
				# Whitelist identified non-affected processors, use vulnerability information from 
				# https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability
				# Partnumbers can be found here:
				# https://github.com/gcc-mirror/gcc/blob/master/gcc/config/arm/arm-cpus.in
				#
				# Maintain cumulative check of vulnerabilities -
				# if at least one of the cpu is affected, then the system is affected
				if [ "$cpuarch" = 7 ] && echo "$cpupart" | grep -q -w -e 0xc08 -e 0xc09 -e 0xc0d -e 0xc0e; then
					variant1=vuln
					variant2=vuln
					[ -z "$variant3" ] && variant3=immune
					[ -z "$variant3a" ] && variant3a=immune
					[ -z "$variant4" ] && variant4=immune
					_debug "checking cpu$i: armv7 A8/A9/A12/A17 non affected to variants 3, 3a & 4"
				elif [ "$cpuarch" = 7 ] && echo "$cpupart" | grep -q -w -e 0xc0f; then
					variant1=vuln
					variant2=vuln
					[ -z "$variant3" ] && variant3=immune
					variant3a=vuln
					[ -z "$variant4" ] && variant4=immune
					_debug "checking cpu$i: armv7 A15 non affected to variants 3 & 4"
				elif [ "$cpuarch" = 8 ] && echo "$cpupart" | grep -q -w -e 0xd07 -e 0xd08; then
					variant1=vuln
					variant2=vuln
					[ -z "$variant3" ] && variant3=immune
					variant3a=vuln
					variant4=vuln
					_debug "checking cpu$i: armv8 A57/A72 non affected to variants 3"
				elif [ "$cpuarch" = 8 ] && echo "$cpupart" | grep -q -w -e 0xd09; then
					variant1=vuln
					variant2=vuln
					[ -z "$variant3" ] && variant3=immune
					[ -z "$variant3a" ] && variant3a=immune
					variant4=vuln
					_debug "checking cpu$i: armv8 A73 non affected to variants 3 & 3a"
				elif [ "$cpuarch" = 8 ] && echo "$cpupart" | grep -q -w -e 0xd0a; then
					variant1=vuln
					variant2=vuln
					variant3=vuln
					[ -z "$variant3a" ] && variant3a=immune
					variant4=vuln
					_debug "checking cpu$i: armv8 A75 non affected to variant 3a"
				elif [ "$cpuarch" = 8 ] && echo "$cpupart" | grep -q -w -e 0xd0b -e 0xd0c -e 0xd0d; then
					variant1=vuln
					[ -z "$variant2" ] && variant2=immune
					[ -z "$variant3" ] && variant3=immune
					[ -z "$variant3a" ] && variant3a=immune
					variant4=vuln
					_debug "checking cpu$i: armv8 A76/A77/NeoverseN1 non affected to variant 2, 3 & 3a"
				elif [ "$cpuarch" = 8 ] && echo "$cpupart" | grep -q -w -e 0xd40 -e 0xd49 -e 0xd4f; then
					variant1=vuln
					[ -z "$variant2" ] && variant2=immune
					[ -z "$variant3" ] && variant3=immune
					[ -z "$variant3a" ] && variant3a=immune
					[ -z "$variant4" ] && variant4=immune
					_debug "checking cpu$i: armv8 NeoverseN2/V1/V2 non affected to variant 2, 3, 3a & 4"
				elif [ "$cpuarch" -le 7 ] || { [ "$cpuarch" = 8 ] && [ $(( cpupart )) -lt $(( 0xd07 )) ]; } ; then
					[ -z "$variant1" ] && variant1=immune
					[ -z "$variant2" ] && variant2=immune
					[ -z "$variant3" ] && variant3=immune
					[ -z "$variant3a" ] && variant3a=immune
					[ -z "$variant4" ] && variant4=immune
					_debug "checking cpu$i: arm arch$cpuarch, all immune (v7 or v8 and model < 0xd07)"
				else
					variant1=vuln
					variant2=vuln
					variant3=vuln
					variant3a=vuln
					variant4=vuln
					_debug "checking cpu$i: arm unknown arch$cpuarch part$cpupart, considering vuln"
				fi
			fi
			_debug "is_cpu_affected: for cpu$i and so far, we have <$variant1> <$variant2> <$variant3> <$variant3a> <$variant4>"
		done
		variantl1tf=immune
	fi

	# we handle iTLB Multihit here (not linked to is_specex_free)
	if is_intel; then
		# commit f9aa6b73a407b714c9aac44734eb4045c893c6f7
		if [ "$cpu_family" = 6 ]; then
			if [ "$cpu_model" = "$INTEL_FAM6_ATOM_SALTWELL" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SALTWELL_TABLET" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SALTWELL_MID" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_BONNELL" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_BONNELL_MID" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT_D" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT_MID" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_AIRMONT" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_XEON_PHI_KNL" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_XEON_PHI_KNM" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_AIRMONT_MID" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_GOLDMONT" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_GOLDMONT_D" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_GOLDMONT_PLUS" ]; then
				_debug "is_cpu_affected: intel family 6 but model known to be immune to itlbmh"
				[ -z "$variant_itlbmh" ] && variant_itlbmh=immune
			else
				_debug "is_cpu_affected: intel family 6 is vuln to itlbmh"
				variant_itlbmh=vuln
			fi
		elif [ "$cpu_family" -lt 6 ]; then
			_debug "is_cpu_affected: intel family < 6 is immune to itlbmh"
			[ -z "$variant_itlbmh" ] && variant_itlbmh=immune
		fi
	else
		_debug "is_cpu_affected: non-intel not affected to itlbmh"
		[ -z "$variant_itlbmh" ] && variant_itlbmh=immune
	fi

	_debug "is_cpu_affected: temp results are <$variant1> <$variant2> <$variant3> <$variant3a> <$variant4> <$variantl1tf>"
	[ "$variant1"          = "immune" ] && variant1=1       || variant1=0
	[ "$variant2"          = "immune" ] && variant2=1       || variant2=0
	[ "$variant3"          = "immune" ] && variant3=1       || variant3=0
	[ "$variant3a"         = "immune" ] && variant3a=1      || variant3a=0
	[ "$variant4"          = "immune" ] && variant4=1       || variant4=0
	[ "$variantl1tf"       = "immune" ] && variantl1tf=1    || variantl1tf=0
	[ "$variant_msbds"     = "immune" ] && variant_msbds=1  || variant_msbds=0
	[ "$variant_mfbds"     = "immune" ] && variant_mfbds=1  || variant_mfbds=0
	[ "$variant_mlpds"     = "immune" ] && variant_mlpds=1  || variant_mlpds=0
	[ "$variant_mdsum"     = "immune" ] && variant_mdsum=1  || variant_mdsum=0
	[ "$variant_taa"       = "immune" ] && variant_taa=1    || variant_taa=0
	[ "$variant_itlbmh"    = "immune" ] && variant_itlbmh=1 || variant_itlbmh=0
	[ "$variant_srbds"     = "immune" ] && variant_srbds=1  || variant_srbds=0
	[ "$variant_zenbleed"  = "immune" ] && variant_zenbleed=1  || variant_zenbleed=0
	[ "$variant_downfall"  = "immune" ] && variant_downfall=1  || variant_downfall=0
	[ "$variant_inception" = "immune" ] && variant_inception=1 || variant_inception=0
	[ "$variant_reptar"    = "immune" ] && variant_reptar=1    || variant_reptar=0
	variantl1tf_sgx="$variantl1tf"
	# even if we are affected to L1TF, if there's no SGX, we're not affected to the original foreshadow
	[ "$cpuid_sgx" = 0 ] && variantl1tf_sgx=1
	_debug "is_cpu_affected: final results are <$variant1> <$variant2> <$variant3> <$variant3a> <$variant4> <$variantl1tf> <$variantl1tf_sgx>"
	is_cpu_affected_cached=1
	_is_cpu_affected_cached "$1"
	return $?
}

is_cpu_specex_free()
{
	# return true (0) if the CPU doesn't do speculative execution, false (1) if it does.
	# if it's not in the list we know, return false (1).
	# source: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/x86/kernel/cpu/common.c#n882
	# { X86_VENDOR_INTEL,	6, INTEL_FAM6_ATOM_SALTWELL,	X86_FEATURE_ANY },
	# { X86_VENDOR_INTEL,	6, INTEL_FAM6_ATOM_SALTWELL_TABLET,	X86_FEATURE_ANY },
	# { X86_VENDOR_INTEL,	6, INTEL_FAM6_ATOM_BONNELL_MID,	X86_FEATURE_ANY },
	# { X86_VENDOR_INTEL,	6, INTEL_FAM6_ATOM_SALTWELL_MID,	X86_FEATURE_ANY },
	# { X86_VENDOR_INTEL,	6, INTEL_FAM6_ATOM_BONNELL,	X86_FEATURE_ANY },
	# { X86_VENDOR_CENTAUR,   5 },
	# { X86_VENDOR_INTEL,     5 },
	# { X86_VENDOR_NSC,       5 },
	# { X86_VENDOR_ANY,       4 },

	parse_cpu_details
	if is_intel; then
		if [ "$cpu_family" = 6 ]; then
			if [ "$cpu_model" = "$INTEL_FAM6_ATOM_SALTWELL"	] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SALTWELL_TABLET"	] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_BONNELL_MID"		] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SALTWELL_MID"	] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_BONNELL"	]; then
				return 0
			fi
		elif [ "$cpu_family" = 5 ]; then
			return 0
		fi
	fi
	[ "$cpu_family" = 4 ] && return 0
	return 1
}

is_cpu_mds_free()
{
	# return true (0) if the CPU isn't affected by microarchitectural data sampling, false (1) if it does.
	# if it's not in the list we know, return false (1).
	# source: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/x86/kernel/cpu/common.c
	#VULNWL_INTEL(ATOM_GOLDMONT,             NO_MDS | NO_L1TF),
	#VULNWL_INTEL(ATOM_GOLDMONT_X,           NO_MDS | NO_L1TF),
	#VULNWL_INTEL(ATOM_GOLDMONT_PLUS,        NO_MDS | NO_L1TF),

	#/* AMD Family 0xf - 0x12 */
	#VULNWL_AMD(0x0f,        NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS),
	#VULNWL_AMD(0x10,        NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS),
	#VULNWL_AMD(0x11,        NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS),
	#VULNWL_AMD(0x12,        NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS),

	#/* FAMILY_ANY must be last, otherwise 0x0f - 0x12 matches won't work */
	#VULNWL_AMD(X86_FAMILY_ANY,      NO_MELTDOWN | NO_L1TF | NO_MDS),
	#VULNWL_HYGON(X86_FAMILY_ANY,    NO_MELTDOWN | NO_L1TF | NO_MDS),
	parse_cpu_details
	if is_intel; then
		if [ "$cpu_family" = 6 ]; then
			if [ "$cpu_model" = "$INTEL_FAM6_ATOM_GOLDMONT" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_GOLDMONT_D" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_GOLDMONT_PLUS" ]; then
				return 0
			fi
		fi
		[ "$capabilities_mds_no" = 1 ] && return 0
	fi

	# official statement from AMD says none of their CPUs are affected
	# https://www.amd.com/en/corporate/product-security
	# https://www.amd.com/system/files/documents/security-whitepaper.pdf
	if is_amd; then
		return 0
	elif is_hygon; then
		return 0
	elif [ "$cpu_vendor" = CAVIUM ]; then
		return 0
	elif [ "$cpu_vendor" = PHYTIUM ]; then
		return 0
	elif [ "$cpu_vendor" = ARM ]; then
		return 0
	fi

	return 1
}


is_cpu_taa_free()
{
	# return true (0) if the CPU isn't affected by tsx asynchronous aborts, false (1) if it does.
	# There are three types of processors that do not require additional mitigations.
	# 1. CPUs that do not support Intel TSX are not affected.
	# 2. CPUs that enumerate IA32_ARCH_CAPABILITIES[TAA_NO] (bit 8)=1 are not affected.
	# 3. CPUs that support Intel TSX and do not enumerate IA32_ARCH_CAPABILITIES[MDS_NO] (bit 5)=1
	# do not need additional mitigations beyond what is already required to mitigate MDS.

	if ! is_intel; then
		return 0
	# is intel
	elif [ "$capabilities_taa_no" = 1 ] || [ "$cpuid_rtm" = 0 ]; then
		return 0
	fi

	return 1
}

is_cpu_srbds_free()
{
	# return zero (0) if the CPU isn't affected by special register buffer data sampling, one (1) if it is.
	# If it's not in the list we know, return one (1).
	# source: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/x86/kernel/cpu/common.c
	#
	# A processor is affected by SRBDS if its Family_Model and stepping is in the
	# following list, with the exception of the listed processors
	# exporting MDS_NO while Intel TSX is available yet not enabled. The
	# latter class of processors are only affected when Intel TSX is enabled
	# by software using TSX_CTRL_MSR otherwise they are not affected.
	#
	# =============  ============  ========
	# common name    Family_Model  Stepping
	# =============  ============  ========
	# IvyBridge      06_3AH        All              (INTEL_FAM6_IVYBRIDGE)
	#
	# Haswell        06_3CH        All              (INTEL_FAM6_HASWELL)
	# Haswell_L      06_45H        All              (INTEL_FAM6_HASWELL_L)
	# Haswell_G      06_46H        All              (INTEL_FAM6_HASWELL_G)
	#
	# Broadwell_G    06_47H        All              (INTEL_FAM6_BROADWELL_G)
	# Broadwell      06_3DH        All              (INTEL_FAM6_BROADWELL)
	#
	# Skylake_L      06_4EH        All              (INTEL_FAM6_SKYLAKE_L)
	# Skylake        06_5EH        All              (INTEL_FAM6_SKYLAKE)
	#
	# Kabylake_L     06_8EH        <=0xC (MDS_NO)   (INTEL_FAM6_KABYLAKE_L)
	#
	# Kabylake       06_9EH        <=0xD (MDS_NO)   (INTEL_FAM6_KABYLAKE)
	# =============  ============  ========
	parse_cpu_details
	if is_intel; then
		if [ "$cpu_family" = 6 ]; then
			if [ "$cpu_model" = "$INTEL_FAM6_IVYBRIDGE" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_HASWELL" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_HASWELL_L" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_HASWELL_G" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_BROADWELL_G" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_BROADWELL" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_SKYLAKE_L" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_SKYLAKE" ]; then
				return 1
			elif [ "$cpu_model" = "$INTEL_FAM6_KABYLAKE_L" ] && [ "$cpu_stepping" -le 12 ] || \
				[ "$cpu_model" = "$INTEL_FAM6_KABYLAKE" ] && [ "$cpu_stepping" -le 13 ]; then
				if [ "$capabilities_mds_no" -eq 1 ] && { [ "$cpuid_rtm" -eq 0 ] || [ "$tsx_ctrl_msr_rtm_disable" -eq 1 ] ;} ; then
					return 0
				else
					return 1
				fi
			fi
		fi
	fi

	return 0

}

is_cpu_ssb_free()
{
	# return true (0) if the CPU isn't affected by speculative store bypass, false (1) if it does.
	# if it's not in the list we know, return false (1).
	# source1: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/x86/kernel/cpu/common.c#n945
	# source2: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/tree/arch/x86/kernel/cpu/common.c
	# Only list CPUs that speculate but are immune, to avoid duplication of cpus listed in is_cpu_specex_free()
	#{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_SILVERMONT	},
	#{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_AIRMONT		},
	#{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_SILVERMONT_X	},
	#{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_ATOM_SILVERMONT_MID	},
	#{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_CORE_YONAH		},
	#{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_XEON_PHI_KNL		},
	#{ X86_VENDOR_INTEL,	6,	INTEL_FAM6_XEON_PHI_KNM		},
	#{ X86_VENDOR_AMD,	0x12,					},
	#{ X86_VENDOR_AMD,	0x11,					},
	#{ X86_VENDOR_AMD,	0x10,					},
	#{ X86_VENDOR_AMD,	0xf,					},
	parse_cpu_details
	if is_intel; then
		if [ "$cpu_family" = 6 ]; then
			if [ "$cpu_model" = "$INTEL_FAM6_ATOM_AIRMONT"          ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT_D" ] || \
				[ "$cpu_model" = "$INTEL_FAM6_ATOM_SILVERMONT_MID"  ]; then
				return 0
			elif [ "$cpu_model" = "$INTEL_FAM6_CORE_YONAH"          ] || \
				[ "$cpu_model" = "$INTEL_FAM6_XEON_PHI_KNL"     ] || \
				[ "$cpu_model" = "$INTEL_FAM6_XEON_PHI_KNM"     ]; then
				return 0
			fi
		fi
	fi
	if is_amd; then
		if [ "$cpu_family" = "18" ] || \
			[ "$cpu_family" = "17" ] || \
			[ "$cpu_family" = "16" ] || \
			[ "$cpu_family" = "15" ]; then 
			return 0
		fi
	fi
	if is_hygon; then
		return 1
	fi
	[ "$cpu_family" = 4 ] && return 0
	return 1
}

show_header()
{
	_info "Spectre and Meltdown mitigation detection tool v$VERSION"
	_info
}

# Family-Model-Stepping to CPUID
# prints CPUID in base-10 to stdout
fms2cpuid()
{
	_family="$1"
	_model="$2"
	_stepping="$3"

	if [ "$(( _family ))" -le 15 ]; then
		_extfamily=0
		_lowfamily=$(( _family ))
	else
		# when we have a family > 0xF, then lowfamily is stuck at 0xF
		# and extfamily is ADDED to it (as in "+"), to ensure old software
		# never sees a lowfamily < 0xF for newer families
		_lowfamily=15
		_extfamily=$(( (_family) - 15 ))
	fi
	_extmodel=$((  (_model  & 0xF0 ) >> 4 ))
	_lowmodel=$((  (_model  & 0x0F ) >> 0 ))
	echo $(( (_stepping & 0x0F) | (_lowmodel << 4) | (_lowfamily << 8) | (_extmodel << 16) | (_extfamily << 20) ))
}

download_file()
{
	_url="$1"
	_file="$2"
	if command -v wget >/dev/null 2>&1; then
		wget -q "$_url" -O "$_file"; ret=$?
	elif command -v curl >/dev/null 2>&1; then
		curl -sL "$_url" -o "$_file"; ret=$?
	elif command -v fetch >/dev/null 2>&1; then
		fetch -q "$_url" -o "$_file"; ret=$?
	else
		echo ERROR "please install one of \`wget\`, \`curl\` of \`fetch\` programs"
		unset _file _url
		return 1
	fi
	unset _file _url
	if [ "$ret" != 0 ]; then
		echo ERROR "error $ret"
		return $ret
	fi
	echo DONE
}

[ -z "$HOME" ] && HOME="$(getent passwd "$(whoami)" | cut -d: -f6)"
mcedb_cache="$HOME/.mcedb"
update_fwdb()
{
	show_header

	set -e

	if [ -r "$mcedb_cache" ]; then
		previous_dbversion=$(awk '/^# %%% MCEDB / { print $4 }' "$mcedb_cache")
	fi

	# first, download the MCE.db from the excellent platomav's MCExtractor project
	mcedb_tmp="$(mktemp -t smc-mcedb-XXXXXX)"
	mcedb_url='https://github.com/platomav/MCExtractor/raw/master/MCE.db'
	_info_nol "Fetching MCE.db from the MCExtractor project... "
	download_file "$mcedb_url" "$mcedb_tmp" || return $?

	# second, get the Intel firmwares from GitHub
	intel_tmp="$(mktemp -d -t smc-intelfw-XXXXXX)"
	intel_url="https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/archive/main.zip"
	_info_nol "Fetching Intel firmwares... "
	## https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files.git
	download_file "$intel_url" "$intel_tmp/fw.zip" || return $?

	# now extract MCEdb contents using sqlite
	_info_nol "Extracting MCEdb data... "
	if ! command -v sqlite3 >/dev/null 2>&1; then
		echo ERROR "please install the \`sqlite3\` program"
		return 1
	fi
	mcedb_revision=$(sqlite3 "$mcedb_tmp" "SELECT \"revision\" from \"MCE\"")
	if [ -z "$mcedb_revision" ]; then
		echo ERROR "downloaded file seems invalid"
		return 1
	fi
	sqlite3 "$mcedb_tmp" "ALTER TABLE \"Intel\" ADD COLUMN \"origin\" TEXT"
	sqlite3 "$mcedb_tmp" "ALTER TABLE \"Intel\" ADD COLUMN \"pfmask\" TEXT"
	sqlite3 "$mcedb_tmp" "ALTER TABLE \"AMD\" ADD COLUMN \"origin\" TEXT"
	sqlite3 "$mcedb_tmp" "ALTER TABLE \"AMD\" ADD COLUMN \"pfmask\" TEXT"
	sqlite3 "$mcedb_tmp" "UPDATE \"Intel\" SET \"origin\"='mce'"
	sqlite3 "$mcedb_tmp" "UPDATE \"Intel\" SET \"pfmask\"='FF'"
	sqlite3 "$mcedb_tmp" "UPDATE \"AMD\" SET \"origin\"='mce'"
	sqlite3 "$mcedb_tmp" "UPDATE \"AMD\" SET \"pfmask\"='FF'"

	echo OK "MCExtractor database revision $mcedb_revision"

	# parse Intel firmwares to get their versions
	_info_nol "Integrating Intel firmwares data to db... "
	if ! command -v unzip >/dev/null 2>&1; then
		echo ERROR "please install the \`unzip\` program"
		return 1
	fi
	( cd "$intel_tmp" && unzip fw.zip >/dev/null; )
	if ! [ -d "$intel_tmp/Intel-Linux-Processor-Microcode-Data-Files-main/intel-ucode" ]; then
		echo ERROR "expected the 'intel-ucode' folder in the downloaded zip file"
		return 1
	fi

	if ! command -v iucode_tool >/dev/null 2>&1; then
		if ! command -v iucode-tool >/dev/null 2>&1; then
			echo ERROR "please install the \`iucode-tool\` program"
			return 1
		else
			iucode_tool="iucode-tool"
		fi
	else
		iucode_tool="iucode_tool"
	fi
	#  079/001: sig 0x000106c2, pf_mask 0x01, 2009-04-10, rev 0x0217, size 5120
	#  078/004: sig 0x000106ca, pf_mask 0x10, 2009-08-25, rev 0x0107, size 5120
	$iucode_tool -l "$intel_tmp/Intel-Linux-Processor-Microcode-Data-Files-main/intel-ucode" | grep -wF sig | while read -r _line
	do
		_cpuid=$(echo "$_line" | grep -Eio 'sig 0x[0-9a-f]+' | awk '{print $2}')
		_cpuid=$(( _cpuid ))
		_cpuid=$(printf "%08X" "$_cpuid")
		_pfmask=$(echo "$_line" | grep -Eio 'pf_mask 0x[0-9a-f]+' | awk '{print $2}')
		_pfmask=$(( _pfmask ))
		_pfmask=$(printf "%02X" $_pfmask)
		_date=$(echo "$_line" | grep -Eo '(19|20)[0-9][0-9]-[01][0-9]-[0-3][0-9]' | tr -d '-')
		_version=$(echo "$_line" | grep -Eio 'rev 0x[0-9a-f]+' | awk '{print $2}')
		_version=$(( _version ))
		_version=$(printf "%08X" "$_version")
		# ensure the official Intel DB always has precedence over mcedb, even if mcedb has seen a more recent fw
		sqlite3 "$mcedb_tmp" "DELETE FROM \"Intel\" WHERE \"origin\" != \"intel\" AND \"cpuid\" = '$_cpuid';"
		# then insert our version
		sqlite3 "$mcedb_tmp" "INSERT INTO \"Intel\" (\"origin\",\"cpuid\",\"pfmask\",\"version\",\"yyyymmdd\") VALUES ('intel','$_cpuid','$_pfmask','$_version','$_date');"
	done
	_intel_timestamp=$(stat -c %Y "$intel_tmp/Intel-Linux-Processor-Microcode-Data-Files-main/license" 2>/dev/null)
	if [ -n "$_intel_timestamp" ]; then
		# use this date, it matches the last commit date
		_intel_latest_date=$(date +%Y%m%d -d @"$_intel_timestamp")
	else
		echo "Falling back to the latest microcode date"
		_intel_latest_date=$(sqlite3 "$mcedb_tmp" "SELECT \"yyyymmdd\" FROM \"Intel\" WHERE \"origin\"='intel' ORDER BY \"yyyymmdd\" DESC LIMIT 1;")
	fi
	echo DONE "(version $_intel_latest_date)"

	# now parse the most recent linux-firmware amd-ucode README file
	_info_nol "Fetching latest amd-ucode README from linux-firmware project... "
	linuxfw_url="https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/amd-ucode/README"
	linuxfw_tmp=$(mktemp -t smc-linuxfw-XXXXXX)
	download_file "$linuxfw_url" "$linuxfw_tmp" || return $?

	_info_nol "Parsing the README... "
	nbfound=0
	for line in $(grep -E 'Family=0x[0-9a-f]+ Model=0x[0-9a-f]+ Stepping=0x[0-9a-f]+: Patch=0x[0-9a-f]+' "$linuxfw_tmp" | tr " " ","); do
		_debug "Parsing line $line"
		_family=$(  echo "$line" | grep -Eoi 'Family=0x[0-9a-f]+'   | cut -d= -f2)
		_model=$(   echo "$line" | grep -Eoi 'Model=0x[0-9a-f]+'    | cut -d= -f2)
		_stepping=$(echo "$line" | grep -Eoi 'Stepping=0x[0-9a-f]+' | cut -d= -f2)
		_version=$( echo "$line" | grep -Eoi 'Patch=0x[0-9a-f]+'    | cut -d= -f2)
		_version=$(printf "%08X" "$(( _version ))")
		_cpuid=$(fms2cpuid "$_family" "$_model" "$_stepping")
		_cpuid=$(printf "%08X" "$_cpuid")
		_sqlstm="INSERT INTO \"AMD\" (\"origin\",\"cpuid\",\"pfmask\",\"version\",\"yyyymmdd\") VALUES ('linux-firmware','$_cpuid','FF','$_version','20000101')"
		_debug "family $_family model $_model stepping $_stepping cpuid $_cpuid"
		_debug "$_sqlstm"
		sqlite3 "$mcedb_tmp" "$_sqlstm"
		nbfound=$((nbfound + 1))
		unset _family _model _stepping _version _cpuid _date _sqlstm
	done
	echo "found $nbfound microcodes"
	unset nbfound

	dbversion="$mcedb_revision+i$_intel_latest_date"
	linuxfw_hash=$(md5sum "$linuxfw_tmp" 2>/dev/null | cut -c1-4)
	if [ -n "$linuxfw_hash" ]; then
		dbversion="$dbversion+$linuxfw_hash"
	fi

	if [ "$1" != builtin ] && [ -n "$previous_dbversion" ] && [ "$previous_dbversion" = "v$dbversion" ]; then
		echo "We already have this version locally, no update needed"
		return 0
	fi

	_info_nol "Building local database... "
	{
		echo "# Spectre & Meltdown Checker";
		echo "# %%% MCEDB v$dbversion";
		# we'll use the more recent fw for Intel and AMD
		sqlite3 "$mcedb_tmp" "SELECT '# I,0x'||\"t1\".\"cpuid\"||',0x'||\"t1\".\"pfmask\"||',0x'||MAX(\"t1\".\"version\")||','||\"t1\".\"yyyymmdd\" FROM \"Intel\" AS \"t1\" LEFT OUTER JOIN \"Intel\" AS \"t2\" ON \"t2\".\"cpuid\"=\"t1\".\"cpuid\" AND \"t2\".\"pfmask\"=\"t1\".\"pfmask\" AND \"t2\".\"yyyymmdd\" > \"t1\".\"yyyymmdd\" WHERE \"t2\".\"yyyymmdd\" IS NULL GROUP BY \"t1\".\"cpuid\",\"t1\".\"pfmask\" ORDER BY \"t1\".\"cpuid\",\"t1\".\"pfmask\" ASC;" | grep -v '^# .,0x00000000,';
		sqlite3 "$mcedb_tmp" "SELECT '# A,0x'||\"t1\".\"cpuid\"||',0x'||\"t1\".\"pfmask\"||',0x'||MAX(\"t1\".\"version\")||','||\"t1\".\"yyyymmdd\" FROM \"AMD\"   AS \"t1\" LEFT OUTER JOIN \"AMD\"   AS \"t2\" ON \"t2\".\"cpuid\"=\"t1\".\"cpuid\" AND \"t2\".\"pfmask\"=\"t1\".\"pfmask\" AND \"t2\".\"yyyymmdd\" > \"t1\".\"yyyymmdd\" WHERE \"t2\".\"yyyymmdd\" IS NULL GROUP BY \"t1\".\"cpuid\",\"t1\".\"pfmask\" ORDER BY \"t1\".\"cpuid\",\"t1\".\"pfmask\" ASC;" | grep -v '^# .,0x00000000,';
	} > "$mcedb_cache"
	echo DONE "(version $dbversion)"

	if [ "$1" = builtin ]; then
		newfile=$(mktemp -t smc-builtin-XXXXXX)
		awk '/^# %%% MCEDB / { exit }; { print }' "$0" > "$newfile"
		awk '{ if (NR>1) { print } }' "$mcedb_cache" >> "$newfile"
		cat "$newfile" > "$0"
		rm -f "$newfile"
	fi
}

parse_opt_file()
{
	# parse_opt_file option_name option_value
	option_name="$1"
	option_value="$2"
	if [ -z "$option_value" ]; then
		show_header
		show_usage
		echo "$0: error: --$option_name expects one parameter (a file)" >&2
		exit 1
	elif [ ! -e "$option_value" ]; then
		show_header
		echo "$0: error: couldn't find file $option_value" >&2
		exit 1
	elif [ ! -f "$option_value" ]; then
		show_header
		echo "$0: error: $option_value is not a file" >&2
		exit 1
	elif [ ! -r "$option_value" ]; then
		show_header
		echo "$0: error: couldn't read $option_value (are you root?)" >&2
		exit 1
	fi
	echo "$option_value"
	exit 0
}

while [ -n "${1:-}" ]; do
	if [ "$1" = "--kernel" ]; then
		opt_kernel=$(parse_opt_file kernel "$2"); ret=$?
		[ $ret -ne 0 ] && exit 255
		shift 2
	elif [ "$1" = "--config" ]; then
		opt_config=$(parse_opt_file config "$2"); ret=$?
		[ $ret -ne 0 ] && exit 255
		shift 2
	elif [ "$1" = "--map" ]; then
		opt_map=$(parse_opt_file map "$2"); ret=$?
		[ $ret -ne 0 ] && exit 255
		shift 2
	elif [ "$1" = "--arch-prefix" ]; then
		opt_arch_prefix="$2"
		shift 2
	elif [ "$1" = "--live" ]; then
		opt_live=1
		shift
	elif [ "$1" = "--no-color" ]; then
		opt_no_color=1
		shift
	elif [ "$1" = "--no-sysfs" ]; then
		opt_no_sysfs=1
		shift
	elif [ "$1" = "--sysfs-only" ]; then
		opt_sysfs_only=1
		shift
	elif [ "$1" = "--coreos" ]; then
		opt_coreos=1
		shift
	elif [ "$1" = "--coreos-within-toolbox" ]; then
		# don't use directly: used internally by --coreos
		opt_coreos=0
		shift
	elif [ "$1" = "--paranoid" ]; then
		opt_paranoid=1
		shift
	elif [ "$1" = "--hw-only" ]; then
		opt_hw_only=1
		shift
	elif [ "$1" = "--no-hw" ]; then
		opt_no_hw=1
		shift
	elif [ "$1" = "--allow-msr-write" ]; then
		opt_allow_msr_write=1
		shift
	elif [ "$1" = "--no-intel-db" ]; then
		opt_intel_db=0
		shift
	elif [ "$1" = "--cpu" ]; then
		opt_cpu=$2
		if [ "$opt_cpu" != all ]; then
			if echo "$opt_cpu" | grep -Eq '^[0-9]+'; then
				opt_cpu=$(( opt_cpu ))
			else
				echo "$0: error: --cpu should be an integer or 'all', got '$opt_cpu'" >&2
				exit 255
			fi
		fi
		shift 2
	elif [ "$1" = "--no-explain" ]; then
		# deprecated, kept for compatibility
		opt_explain=0
		shift
	elif [ "$1" = "--update-fwdb" ] || [ "$1" = "--update-mcedb" ]; then
		update_fwdb
		exit $?
	elif [ "$1" = "--update-builtin-fwdb" ] || [ "$1" = "--update-builtin-mcedb" ]; then
		update_fwdb builtin
		exit $?
	elif [ "$1" = "--dump-mock-data" ]; then
		opt_mock=1
		shift
	elif [ "$1" = "--explain" ]; then
		opt_explain=1
		shift
	elif [ "$1" = "--batch" ]; then
		opt_batch=1
		opt_verbose=0
		opt_no_color=1
		shift
		case "$1" in
			text|short|nrpe|json|prometheus) opt_batch_format="$1"; shift;;
			--*) ;;    # allow subsequent flags
			'') ;;     # allow nothing at all
			*)
				echo "$0: error: unknown batch format '$1'" >&2
				echo "$0: error: --batch expects a format from: text, nrpe, json" >&2
				exit 255
				;;
		esac
	elif [ "$1" = "-v" ] || [ "$1" = "--verbose" ]; then
		opt_verbose=$(( opt_verbose + 1 ))
		[ "$opt_verbose" -ge 2 ] && opt_mock=1
		shift
	elif [ "$1" = "--cve" ]; then
		if [ -z "$2" ]; then
			echo "$0: error: option --cve expects a parameter, supported CVEs are: $supported_cve_list" >&2
			exit 255
		fi
		selected_cve=$(echo "$supported_cve_list" | grep -iwo "$2")
		if [ -n "$selected_cve" ]; then
			opt_cve_list="$opt_cve_list $selected_cve"
			opt_cve_all=0
		else
			echo "$0: error: unsupported CVE specified ('$2'), supported CVEs are: $supported_cve_list" >&2
			exit 255
		fi
		shift 2
	elif [ "$1" = "--vmm" ]; then
		if [ -z "$2" ]; then
			echo "$0: error: option --vmm (auto, yes, no)" >&2
			exit 255
		fi
		case "$2" in
			auto) opt_vmm=-1;;
			yes)  opt_vmm=1;;
			no)   opt_vmm=0;;
			*)    echo "$0: error: expected one of (auto, yes, no) to option --vmm instead of '$2'" >&2; exit 255;;
		esac
		shift 2
	elif [ "$1" = "--variant" ]; then
		if [ -z "$2" ]; then
			echo "$0: error: option --variant expects a parameter (see --variant help)" >&2
			exit 255
		fi
		case "$2" in
			help)	echo "The following parameters are supported for --variant (can be used multiple times):";
					echo "1, 2, 3, 3a, 4, msbds, mfbds, mlpds, mdsum, l1tf, taa, mcepsc, srbds, zenbleed, downfall, inception";
					exit 0;;
			1)			opt_cve_list="$opt_cve_list CVE-2017-5753"; opt_cve_all=0;;
			2)			opt_cve_list="$opt_cve_list CVE-2017-5715"; opt_cve_all=0;;
			3)			opt_cve_list="$opt_cve_list CVE-2017-5754"; opt_cve_all=0;;
			3a)			opt_cve_list="$opt_cve_list CVE-2018-3640"; opt_cve_all=0;;
			4)			opt_cve_list="$opt_cve_list CVE-2018-3639"; opt_cve_all=0;;
			msbds)		opt_cve_list="$opt_cve_list CVE-2018-12126"; opt_cve_all=0;;
			mfbds)		opt_cve_list="$opt_cve_list CVE-2018-12130"; opt_cve_all=0;;
			mlpds)		opt_cve_list="$opt_cve_list CVE-2018-12127"; opt_cve_all=0;;
			mdsum)		opt_cve_list="$opt_cve_list CVE-2019-11091"; opt_cve_all=0;;
			l1tf)		opt_cve_list="$opt_cve_list CVE-2018-3615 CVE-2018-3620 CVE-2018-3646"; opt_cve_all=0;;
			taa)		opt_cve_list="$opt_cve_list CVE-2019-11135"; opt_cve_all=0;;
			mcepsc)		opt_cve_list="$opt_cve_list CVE-2018-12207"; opt_cve_all=0;;
			srbds)		opt_cve_list="$opt_cve_list CVE-2020-0543"; opt_cve_all=0;;
			zenbleed)	opt_cve_list="$opt_cve_list CVE-2023-20593"; opt_cve_all=0;;
			downfall)   opt_cve_list="$opt_cve_list CVE-2022-40982"; opt_cve_all=0;;
			inception)  opt_cve_list="$opt_cve_list CVE-2023-20569"; opt_cve_all=0;;
			reptar)     opt_cve_list="$opt_cve_list CVE-2023-23583"; opt_cve_all=0;;
			*)
				echo "$0: error: invalid parameter '$2' for --variant, see --variant help for a list" >&2;
				exit 255
				;;
		esac
		shift 2
	elif [ "$1" = "-h" ] || [ "$1" = "--help" ]; then
		show_header
		show_usage
		exit 0
	elif [ "$1" = "--version" ]; then
		opt_no_color=1
		show_header
		exit 0
	elif [ "$1" = "--disclaimer" ]; then
		show_header
		show_disclaimer
		exit 0
	else
		show_header
		show_usage
		echo "$0: error: unknown option '$1'"
		exit 255
	fi
done

show_header

if [ "$opt_no_sysfs" = 1 ] && [ "$opt_sysfs_only" = 1 ]; then
	_warn "Incompatible options specified (--no-sysfs and --sysfs-only), aborting"
	exit 255
fi

if [ "$opt_no_hw" = 1 ] && [ "$opt_hw_only" = 1 ]; then
	_warn "Incompatible options specified (--no-hw and --hw-only), aborting"
	exit 255
fi

if [ "$opt_live" = -1 ]; then
	if [ -n "$opt_kernel" ] || [ -n "$opt_config" ] || [ -n "$opt_map" ]; then
		# no --live specified and we have a least one of the kernel/config/map files on the cmdline: offline mode
		opt_live=0
	else
		opt_live=1
	fi
fi

# print status function
# param1: color
# param2: message to print
# param3(optional): supplement message to print between ()
pstatus()
{
	if [ "$opt_no_color" = 1 ]; then
		_info_nol "$2"
	else
		case "$1" in
			red)    _col="\033[41m\033[30m";;
			green)  _col="\033[42m\033[30m";;
			yellow) _col="\033[43m\033[30m";;
			blue)   _col="\033[44m\033[30m";;
			*)      _col="";;
		esac
		_info_nol "$_col $2 \033[0m"
	fi
	[ -n "${3:-}" ] && _info_nol " ($3)"
	_info
	unset _col
}

# Print the final status of a vulnerability (incl. batch mode)
# Arguments are: CVE UNK/OK/VULN description
pvulnstatus()
{
	pvulnstatus_last_cve="$1"
	if [ "$opt_batch" = 1 ]; then
		case "$1" in
			CVE-2017-5753) aka="SPECTRE VARIANT 1";;
			CVE-2017-5715) aka="SPECTRE VARIANT 2";;
			CVE-2017-5754) aka="MELTDOWN";;
			CVE-2018-3640) aka="VARIANT 3A";;
			CVE-2018-3639) aka="VARIANT 4";;
			CVE-2018-3615) aka="L1TF SGX";;
			CVE-2018-3620) aka="L1TF OS";;
			CVE-2018-3646) aka="L1TF VMM";;
			CVE-2018-12126) aka="MSBDS";;
			CVE-2018-12130) aka="MFBDS";;
			CVE-2018-12127) aka="MLPDS";;
			CVE-2019-11091) aka="MDSUM";;
			CVE-2019-11135) aka="TAA";;
			CVE-2018-12207) aka="ITLBMH";;
			CVE-2020-0543) aka="SRBDS";;
			CVE-2023-20593) aka="ZENBLEED";;
			CVE-2022-40982) aka="DOWNFALL";;
			CVE-2023-20569) aka="INCEPTION";;
			CVE-2023-23583) aka="REPTAR";;
			*) echo "$0: error: invalid CVE '$1' passed to pvulnstatus()" >&2; exit 255;;
		esac

		case "$opt_batch_format" in
			text) _echo 0 "$1: $2 ($3)";;
			short) short_output="${short_output}$1 ";;
			json)
				case "$2" in
					UNK)  is_vuln="null";;
					VULN) is_vuln="true";;
					OK)   is_vuln="false";;
					*)    echo "$0: error: unknown status '$2' passed to pvulnstatus()" >&2; exit 255;;
				esac
				[ -z "$json_output" ] && json_output='['
				json_output="${json_output}{\"NAME\":\"$aka\",\"CVE\":\"$1\",\"VULNERABLE\":$is_vuln,\"INFOS\":\"$3\"},"
				;;

			nrpe)	[ "$2" = VULN ] && nrpe_vuln="$nrpe_vuln $1";;
			prometheus)
				prometheus_output="${prometheus_output:+$prometheus_output\n}specex_vuln_status{name=\"$aka\",cve=\"$1\",status=\"$2\",info=\"$3\"} 1"
				;;
			*) echo "$0: error: invalid batch format '$opt_batch_format' specified" >&2; exit 255;;
		esac
	fi

	# always fill global_* vars because we use that do decide the program exit code
	case "$2" in
		UNK)  global_unknown="1";;
		VULN) global_critical="1";;
		OK)   ;;
		*)    echo "$0: error: unknown status '$2' passed to pvulnstatus()" >&2; exit 255;;
	esac

	# display info if we're not in quiet/batch mode
	vulnstatus="$2"
	shift 2
	_info_nol "> \033[46m\033[30mSTATUS:\033[0m "
	: "${final_summary:=}"
	case "$vulnstatus" in
		UNK)  pstatus yellow 'UNKNOWN'        "$@"; final_summary="$final_summary \033[43m\033[30m$pvulnstatus_last_cve:??\033[0m";;
		VULN) pstatus red    'VULNERABLE'     "$@"; final_summary="$final_summary \033[41m\033[30m$pvulnstatus_last_cve:KO\033[0m";;
		OK)   pstatus green  'NOT VULNERABLE' "$@"; final_summary="$final_summary \033[42m\033[30m$pvulnstatus_last_cve:OK\033[0m";;
		*)    echo "$0: error: unknown status '$vulnstatus' passed to pvulnstatus()" >&2; exit 255;;
	esac
}


# The 3 below functions are taken from the extract-linux script, available here:
# https://github.com/torvalds/linux/blob/master/scripts/extract-vmlinux
# The functions have been modified for better integration to this script
# The original header of the file has been retained below

# ----------------------------------------------------------------------
# extract-vmlinux - Extract uncompressed vmlinux from a kernel image
#
# Inspired from extract-ikconfig
# (c) 2009,2010 Dick Streefland <dick@streefland.net>
#
# (c) 2011      Corentin Chary <corentin.chary@gmail.com>
#
# Licensed under the GNU General Public License, version 2 (GPLv2).
# ----------------------------------------------------------------------

kernel=''
kernel_err=''
check_kernel()
{
	_file="$1"
	_mode="${2:-normal}"
	# checking the return code of readelf -h is not enough, we could get
	# a damaged ELF file and validate it, check for stderr warnings too

	# the warning "readelf: Warning: [16]: Link field (0) should index a symtab section./" can appear on valid kernels, ignore it
	_readelf_warnings=$("${opt_arch_prefix}readelf" -S "$_file" 2>&1 >/dev/null | grep -v 'should index a symtab section' | tr "\n" "/"); ret=$?
	_readelf_sections=$("${opt_arch_prefix}readelf" -S "$_file" 2>/dev/null | grep -c -e data -e text -e init)
	_kernel_size=$(stat -c %s "$_file" 2>/dev/null || stat -f %z "$_file" 2>/dev/null || echo 10000)
	_debug "check_kernel: ret=$? size=$_kernel_size sections=$_readelf_sections warnings=$_readelf_warnings"
	if [ "$_mode" = desperate ]; then
		if "${opt_arch_prefix}strings" "$_file" | grep -Eq '^Linux version '; then
			_debug "check_kernel (desperate): ... matched!"
			if [ "$_readelf_sections" = 0 ] && grep -qF -e armv6 -e armv7 "$_file"; then
				_debug "check_kernel (desperate): raw arm binary found, adjusting objdump options"
				objdump_options="-D -b binary -marm"
			else
				objdump_options="-d"
			fi
			return 0
		else
			_debug "check_kernel (desperate): ... invalid"
		fi
	else
		if [ $ret -eq 0 ] && [ -z "$_readelf_warnings" ] && [ "$_readelf_sections" -gt 0 ]; then
			if [ "$_kernel_size" -ge 100000 ]; then
				_debug "check_kernel: ... file is valid"
				objdump_options="-d"
				return 0
			else
				_debug "check_kernel: ... file seems valid but is too small, ignoring"
			fi
		else
			_debug "check_kernel: ... file is invalid"
		fi
	fi
	return 1
}

try_decompress()
{
	# The obscure use of the "tr" filter is to work around older versions of
	# "grep" that report the byte offset of the line instead of the pattern.

	# Try to find the header ($1) and decompress from here
	_debug "try_decompress: looking for $3 magic in $6"
	for     pos in $(tr "$1\n$2" "\n$2=" < "$6" | grep -abo "^$2")
	do
		_debug "try_decompress: magic for $3 found at offset $pos"
		if ! command -v "$3" >/dev/null 2>&1; then
			if [ "$8" = 1 ]; then
				# pass1: if the tool is not installed, just bail out silently
				# and hope that the next decompression tool will be, and that
				# it'll happen to be the proper one for this kernel
				_debug "try_decompress: the '$3' tool is not installed (pass 1), try the next algo"
			else
				# pass2: if the tool is not installed, populate kernel_err this time
				kernel_err="missing '$3' tool, please install it, usually it's in the '$5' package"
				_debug "try_decompress: $kernel_err"
			fi
			return 1
		fi
		pos=${pos%%:*}
		# shellcheck disable=SC2086
		tail -c+$pos "$6" 2>/dev/null | $3 $4 > "$kerneltmp" 2>/dev/null; ret=$?
		if [ ! -s "$kerneltmp" ]; then
			# don't rely on $ret, sometimes it's != 0 but worked
			# (e.g. gunzip ret=2 just means there was trailing garbage)
			_debug "try_decompress: decompression with $3 failed (err=$ret)"
		elif check_kernel "$kerneltmp" "$7"; then
			kernel="$kerneltmp"
			_debug "try_decompress: decompressed with $3 successfully!"
			return 0
		elif [ "$3" != "cat" ]; then
			_debug "try_decompress: decompression with $3 worked but result is not a kernel, trying with an offset"
			[ -z "$kerneltmp2" ] && kerneltmp2=$(mktemp -t smc-kernel-XXXXXX)
			cat "$kerneltmp" > "$kerneltmp2"
			try_decompress '\177ELF' xxy 'cat' '' cat "$kerneltmp2" && return 0
		else
			_debug "try_decompress: decompression with $3 worked but result is not a kernel"
		fi
	done
	return 1
}

extract_kernel()
{
	[ -n "${1:-}" ] || return 1
	# Prepare temp files:
	kerneltmp="$(mktemp -t smc-kernel-XXXXXX)"

	# Initial attempt for uncompressed images or objects:
	if check_kernel "$1"; then
		_debug "extract_kernel: found kernel is valid, no decompression needed"
		cat "$1" > "$kerneltmp"
		kernel=$kerneltmp
		return 0
	fi

	# That didn't work, so retry after decompression.
	for pass in 1 2; do
		for mode in normal desperate; do
			_debug "extract_kernel: pass $pass $mode mode"
			try_decompress '\037\213\010'     xy    gunzip  ''      gunzip      "$1" "$mode" "$pass" && return 0
			try_decompress '\002\041\114\030' xyy   'lz4'   '-d -l' liblz4-tool "$1" "$mode" "$pass" && return 0
			try_decompress '\3757zXZ\000'     abcde unxz    ''      xz-utils    "$1" "$mode" "$pass" && return 0
			try_decompress 'BZh'              xy    bunzip2 ''      bzip2       "$1" "$mode" "$pass" && return 0
			try_decompress '\135\0\0\0'       xxx   unlzma  ''      xz-utils    "$1" "$mode" "$pass" && return 0
			try_decompress '\211\114\132'     xy    'lzop'  '-d'    lzop        "$1" "$mode" "$pass" && return 0
			try_decompress '\177ELF'          xxy   'cat'   ''      cat         "$1" "$mode" "$pass" && return 0
			try_decompress '(\265/\375'       xxy   unzstd  ''      zstd        "$1" "$mode" "$pass" && return 0
		done
	done
	# kernel_err might already have been populated by try_decompress() if we're missing one of the tools
	if [ -z "$kernel_err" ]; then
		kernel_err="kernel compression format is unknown or image is invalid"
	fi
	_verbose "Couldn't extract the kernel image ($kernel_err), accuracy might be reduced"
	return 1
}

# end of extract-vmlinux functions

mount_debugfs()
{
	if [ ! -e /sys/kernel/debug/sched_features ]; then
		# try to mount the debugfs hierarchy ourselves and remember it to umount afterwards
		mount -t debugfs debugfs /sys/kernel/debug 2>/dev/null && mounted_debugfs=1
	fi
}

load_msr()
{
	# only attempt to do it once even if called multiple times
	[ "${load_msr_once:-}" = 1 ] && return
	load_msr_once=1

	if [ "$os" = Linux ]; then
		if ! grep -qw msr "$procfs/modules" 2>/dev/null; then
			modprobe msr 2>/dev/null && insmod_msr=1
			_debug "attempted to load module msr, insmod_msr=$insmod_msr"
		else
			_debug "msr module already loaded"
		fi	
	else
		if ! kldstat -q -m cpuctl; then
			kldload cpuctl 2>/dev/null && kldload_cpuctl=1
			_debug "attempted to load module cpuctl, kldload_cpuctl=$kldload_cpuctl"
		else
			_debug "cpuctl module already loaded"
		fi
	fi
}

load_cpuid()
{
	# only attempt to do it once even if called multiple times
	[ "${load_cpuid_once:-}" = 1 ] && return
	load_cpuid_once=1

	if [ "$os" = Linux ]; then
		if ! grep -qw cpuid "$procfs/modules" 2>/dev/null; then
			modprobe cpuid 2>/dev/null && insmod_cpuid=1
			_debug "attempted to load module cpuid, insmod_cpuid=$insmod_cpuid"
		else
			_debug "cpuid module already loaded"
		fi	
	else
		if ! kldstat -q -m cpuctl; then
			kldload cpuctl 2>/dev/null && kldload_cpuctl=1
			_debug "attempted to load module cpuctl, kldload_cpuctl=$kldload_cpuctl"
		else
			_debug "cpuctl module already loaded"
		fi
	fi
}

# shellcheck disable=SC2034
EAX=1; EBX=2; ECX=3; EDX=4;
READ_CPUID_RET_OK=0
READ_CPUID_RET_KO=1
READ_CPUID_RET_ERR=2
read_cpuid()
{
	if [ "$opt_cpu" != all ]; then
		# we only have one core to read, do it and return the result
		read_cpuid_one_core $opt_cpu "$@"
		return $?
	fi

	# otherwise we must read all cores
	for _core in $(seq 0 "$max_core_id"); do
		read_cpuid_one_core "$_core" "$@"; ret=$?
		if [ "$_core" = 0 ]; then
			# save the result of the first core, for comparison with the others
			_first_core_ret=$ret
			_first_core_value=$read_cpuid_value
		else
			# compare first core with the other ones
			if [ $_first_core_ret != $ret ] || [ "$_first_core_value" != "$read_cpuid_value" ]; then
				read_cpuid_msg="result is not homogeneous between all cores, at least core 0 and $_core differ!"
				return $READ_CPUID_RET_ERR
			fi
		fi
	done
	# if we're here, all cores agree, return the result
	return $ret
}

read_cpuid_one_core()
{
	# on which core to send the CPUID instruction
	_core="$1"
	# leaf is the value of the eax register when calling the cpuid instruction:
	_leaf="$2"
	# subleaf is the value of the ecx register when calling the cpuid instruction:
	_subleaf="$3"
	# eax=1 ebx=2 ecx=3 edx=4:
	_register="$4"
	# number of bits to shift the register right to, 0-31:
	_shift="$5"
	# mask to apply as an AND operand to the shifted register value
	_mask="$6"
	# wanted value (optional), if present we return 0(true) if the obtained value is equal, 1 otherwise:
	_wanted="${7:-}"
	# in any case, the read value is globally available in $read_cpuid_value
	read_cpuid_value=''
	read_cpuid_msg='unknown error'

	if [ $# -lt 6 ]; then
		read_cpuid_msg="read_cpuid: missing arguments, got only $#, expected at least 6: $*"
		return $READ_CPUID_RET_ERR
	fi
	if [ "$_register" -gt 4 ]; then
		read_cpuid_msg="read_cpuid: register must be 0-4, got $_register"
		return $READ_CPUID_RET_ERR
	fi
	if [ "$_shift" -gt 32 ]; then
		read_cpuid_msg="read_cpuid: shift must be 0-31, got $_shift"
		return $READ_CPUID_RET_ERR
	fi

	if [ ! -e /dev/cpu/0/cpuid ] && [ ! -e /dev/cpuctl0 ]; then
		# try to load the module ourselves (and remember it so we can rmmod it afterwards)
		load_cpuid
	fi

	if [ -e /dev/cpu/0/cpuid ]; then
		# Linux
		if [ ! -r /dev/cpu/0/cpuid ]; then
			read_cpuid_msg="Couldn't load cpuid module"
			return $READ_CPUID_RET_ERR
		fi
		# on some kernel versions, /dev/cpu/0/cpuid doesn't imply that the cpuid module is loaded, in that case dd returns an error,
		# we use that fact to load the module if dd returns an error
		if ! dd if=/dev/cpu/0/cpuid bs=16 count=1 >/dev/null 2>&1; then
			load_cpuid
		fi
		# we need _leaf to be converted to decimal for dd
		_leaf=$(( _leaf ))
		_subleaf=$(( _subleaf ))
		_position=$(( _leaf + (_subleaf << 32) ))
		# to avoid using iflag=skip_bytes, which doesn't exist on old versions of dd, seek to the closer multiple-of-16
		_ddskip=$(( _position / 16 ))
		_odskip=$(( _position - _ddskip * 16 ))
		# now read the value
		_cpuid=$(dd if="/dev/cpu/$_core/cpuid" bs=16 skip=$_ddskip count=$((_odskip + 1)) 2>/dev/null | od -j $((_odskip * 16)) -A n -t u4)
	elif [ -e /dev/cpuctl0 ]; then
		# BSD
		if [ ! -r /dev/cpuctl0 ]; then
			read_cpuid_msg="Couldn't read cpuid info from cpuctl"
			return $READ_CPUID_RET_ERR
		fi
		_cpuid=$(cpucontrol -i "$_leaf","$_subleaf" "/dev/cpuctl$_core" 2>/dev/null | cut -d: -f2-)
		# cpuid level 0x4, level_type 0x2: 0x1c004143 0x01c0003f 0x000001ff 0x00000000
	else
		read_cpuid_msg="Found no way to read cpuid info"
		return $READ_CPUID_RET_ERR
	fi

	_debug "cpuid: leaf$_leaf subleaf$_subleaf on cpu$_core, eax-ebx-ecx-edx: $_cpuid"
	_mockvarname="SMC_MOCK_CPUID_${_leaf}_${_subleaf}"
	# shellcheck disable=SC1083
	if [ -n "$(eval echo \${$_mockvarname:-})" ]; then
		_cpuid="$(eval echo \$$_mockvarname)"
		_debug "read_cpuid: MOCKING enabled for leaf $_leaf subleaf $_subleaf, will return $_cpuid"
		mocked=1
	else
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_CPUID_${_leaf}_${_subleaf}='$_cpuid'")
	fi
	if [ -z "$_cpuid" ]; then
		read_cpuid_msg="Failed to get cpuid data"
		return $READ_CPUID_RET_ERR
	fi

	# get the value of the register we want
	_reg=$(echo "$_cpuid" | awk '{print $'"$_register"'}')
	# Linux returns it as decimal, BSD as hex, normalize to decimal
	_reg=$(( _reg ))
	# shellcheck disable=SC2046
	_debug "cpuid: wanted register ($_register) has value $_reg aka "$(printf "%08x" "$_reg")
	_reg_shifted=$(( _reg >> _shift ))
	# shellcheck disable=SC2046
	_debug "cpuid: shifted value by $_shift is $_reg_shifted aka "$(printf "%x" "$_reg_shifted")
	read_cpuid_value=$(( _reg_shifted & _mask ))
	# shellcheck disable=SC2046
	_debug "cpuid: after AND $_mask, final value is $read_cpuid_value aka "$(printf "%x" "$read_cpuid_value")
	if [ -n "$_wanted" ]; then
		_debug "cpuid: wanted $_wanted and got $read_cpuid_value"
		if [ "$read_cpuid_value" = "$_wanted" ]; then
			return $READ_CPUID_RET_OK
		else
			return $READ_CPUID_RET_KO
		fi
	fi

	return $READ_CPUID_RET_OK
}

dmesg_grep()
{
	# grep for something in dmesg, ensuring that the dmesg buffer
	# has not been truncated
	dmesg_grepped=''
	if ! dmesg | grep -qE -e '(^|\] )Linux version [0-9]' -e '^FreeBSD is a registered' ; then
		# dmesg truncated
		return 2
	fi
	dmesg_grepped=$(dmesg | grep -E "$1" | head -1)
	# not found:
	[ -z "$dmesg_grepped" ] && return 1
	# found, output is in $dmesg_grepped
	return 0
}

is_coreos()
{
	command -v coreos-install >/dev/null 2>&1 && command -v toolbox >/dev/null 2>&1 && return 0
	return 1
}

# write_msr
# param1 (mandatory): MSR, can be in hex or decimal.
# param2 (optional): value to write, can be in hex or decimal.
# param3 (optional): CPU index, starting from 0. Default 0.
WRITE_MSR_RET_OK=0
WRITE_MSR_RET_KO=1
WRITE_MSR_RET_ERR=2
WRITE_MSR_RET_LOCKDOWN=3
write_msr()
{
	if [ "$opt_cpu" != all ]; then
		# we only have one core to write to, do it and return the result
		write_msr_one_core $opt_cpu "$@"
		return $?
	fi

	# otherwise we must write on all cores
	for _core in $(seq 0 "$max_core_id"); do
		write_msr_one_core "$_core" "$@"; ret=$?
		if [ "$_core" = 0 ]; then
			# save the result of the first core, for comparison with the others
			_first_core_ret=$ret
		else
			# compare first core with the other ones
			if [ $_first_core_ret != $ret ]; then
				write_msr_msg="result is not homogeneous between all cores, at least core 0 and $_core differ!"
				return $WRITE_MSR_RET_ERR
			fi
		fi
	done
	# if we're here, all cores agree, return the result
	return $ret
}

write_msr_one_core()
{
	_core="$1"
	_msr_dec=$(( $2 ))
	_msr=$(printf "0x%x" "$_msr_dec")
	_value_dec=$(( $3 ))
	_value=$(printf "0x%x" "$_value_dec")

	write_msr_msg='unknown error'
	: "${msr_locked_down:=0}"

	_mockvarname="SMC_MOCK_WRMSR_${_msr}_RET"
	# shellcheck disable=SC2086,SC1083
	if [ -n "$(eval echo \${$_mockvarname:-})" ]; then
		_debug "write_msr: MOCKING enabled for msr $_msr func returns $(eval echo \$$_mockvarname)"
		mocked=1
		[ "$(eval echo \$$_mockvarname)" = $WRITE_MSR_RET_LOCKDOWN ] && msr_locked_down=1
		return "$(eval echo \$$_mockvarname)"
	fi

	if [ ! -e /dev/cpu/0/msr ] && [ ! -e /dev/cpuctl0 ]; then
		# try to load the module ourselves (and remember it so we can rmmod it afterwards)
		load_msr
	fi
	if [ ! -e /dev/cpu/0/msr ] && [ ! -e /dev/cpuctl0 ]; then
		read_msr_msg="is msr kernel module available?"
		return $WRITE_MSR_RET_ERR
	fi

	_write_denied=0
	if [ "$os" != Linux ]; then
		cpucontrol -m "$_msr=$_value" "/dev/cpuctl$_core" >/dev/null 2>&1; ret=$?
	else
		# for Linux
		# convert to decimal
		if [ ! -w /dev/cpu/"$_core"/msr ]; then
			write_msr_msg="No write permission on /dev/cpu/$_core/msr"
			return $WRITE_MSR_RET_ERR
		# if wrmsr is available, use it
		elif command -v wrmsr >/dev/null 2>&1 && [ "${SMC_NO_WRMSR:-}" != 1 ]; then
			_debug "write_msr: using wrmsr"
			wrmsr $_msr_dec $_value_dec 2>/dev/null; ret=$?
			# ret=4: msr doesn't exist, ret=127: msr.allow_writes=off
			[ "$ret" = 127 ] && _write_denied=1
		# or fallback to dd if it supports seek_bytes, we prefer it over perl because we can tell the difference between EPERM and EIO
		elif dd if=/dev/null of=/dev/null bs=8 count=1 seek="$_msr_dec" oflag=seek_bytes 2>/dev/null && [ "${SMC_NO_DD:-}" != 1 ]; then
			_debug "write_msr: using dd"
			awk "BEGIN{printf \"%c\", $_value_dec}" | dd of=/dev/cpu/"$_core"/msr bs=8 count=1 seek="$_msr_dec" oflag=seek_bytes 2>/dev/null; ret=$?
			# if it failed, inspect stderrto look for EPERM
			if [ "$ret" != 0 ]; then
				if awk "BEGIN{printf \"%c\", $_value_dec}" | dd of=/dev/cpu/"$_core"/msr bs=8 count=1 seek="$_msr_dec" oflag=seek_bytes 2>&1 | grep -qF 'Operation not permitted'; then
					_write_denied=1
				fi
			fi
		# or if we have perl, use it, any 5.x version will work
		elif command -v perl >/dev/null 2>&1 && [ "${SMC_NO_PERL:-}" != 1 ]; then
			_debug "write_msr: using perl"
			ret=1
			perl -e "open(M,'>','/dev/cpu/$_core/msr') and seek(M,$_msr_dec,0) and exit(syswrite(M,pack(v4,$_value_dec)))"; [ $? -eq 8 ] && ret=0
		else
			_debug "write_msr: got no wrmsr, perl or recent enough dd!"
			mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_WRMSR_${_msr}_RET=$WRITE_MSR_RET_ERR")
			write_msr_msg="missing tool, install either msr-tools or perl"
			return $WRITE_MSR_RET_ERR
		fi
		if [ "$ret" != 0 ]; then
			# * Fedora (and probably Red Hat) have a "kernel lock down" feature that prevents us to write to MSRs
			# when this mode is enabled and EFI secure boot is enabled (see issue #303)
			# https://src.fedoraproject.org/rpms/kernel/blob/master/f/efi-lockdown.patch
			# when this happens, any write will fail and dmesg will have a msg printed "msr: Direct access to MSR"
			# * A version of this patch also made it to vanilla in 5.4+, in that case the message is: 'raw MSR access is restricted'
			# * we don't use dmesg_grep() because we don't care if dmesg is truncated here, as the message has just been printed
			# yet more recent versions of the msr module can be set to msr.allow_writes=off, in which case no dmesg message is printed,
			# but the write fails
			if [ "$_write_denied" = 1 ]; then
				_debug "write_msr: writing to msr has been denied"
				mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_WRMSR_${_msr}_RET=$WRITE_MSR_RET_LOCKDOWN")
				msr_locked_down=1
				write_msr_msg="your kernel is configured to deny writes to MSRs from user space"
				return $WRITE_MSR_RET_LOCKDOWN
			elif dmesg | grep -qF "msr: Direct access to MSR"; then
				_debug "write_msr: locked down kernel detected (Red Hat / Fedora)"
				mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_WRMSR_${_msr}_RET=$WRITE_MSR_RET_LOCKDOWN")
				msr_locked_down=1
				write_msr_msg="your kernel is locked down (Fedora/Red Hat), please reboot without secure boot and retry"
				return $WRITE_MSR_RET_LOCKDOWN
			elif dmesg | grep -qF "raw MSR access is restricted"; then
				_debug "write_msr: locked down kernel detected (vanilla)"
				mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_WRMSR_${_msr}_RET=$WRITE_MSR_RET_LOCKDOWN")
				msr_locked_down=1
				write_msr_msg="your kernel is locked down, please reboot with lockdown=none in the kernel cmdline and retry"
				return $WRITE_MSR_RET_LOCKDOWN
			fi
			unset _write_denied
		fi
	fi

	# normalize ret
	if [ "$ret" = 0 ]; then
		ret=$WRITE_MSR_RET_OK
	else
		ret=$WRITE_MSR_RET_KO
	fi
	_debug "write_msr: for cpu $_core on msr $_msr, value=$_value, ret=$ret"
	mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_WRMSR_${_msr}_RET=$ret")
	return $ret
}

# read_msr
# param1 (mandatory): MSR, can be in hex or decimal.
# param2 (optional): CPU index, starting from 0. Default 0.
# returned data is available in $read_msr_value
READ_MSR_RET_OK=0
READ_MSR_RET_KO=1
READ_MSR_RET_ERR=2
read_msr()
{
	if [ "$opt_cpu" != all ]; then
		# we only have one core to read, do it and return the result
		read_msr_one_core $opt_cpu "$@"
		return $?
	fi

	# otherwise we must read all cores
	for _core in $(seq 0 "$max_core_id"); do
		read_msr_one_core "$_core" "$@"; ret=$?
		if [ "$_core" = 0 ]; then
			# save the result of the first core, for comparison with the others
			_first_core_ret=$ret
			_first_core_value=$read_msr_value
		else
			# compare first core with the other ones
			if [ $_first_core_ret != $ret ] || [ "$_first_core_value" != "$read_msr_value" ]; then
				read_msr_msg="result is not homogeneous between all cores, at least core 0 and $_core differ!"
				return $READ_MSR_RET_ERR
			fi
		fi
	done
	# if we're here, all cores agree, return the result
	return $ret
}

read_msr_one_core()
{
	_core="$1"
	_msr_dec=$(( $2 ))
	_msr=$(printf "0x%x" "$_msr_dec")

	read_msr_value=''
	read_msr_msg='unknown error'

	_mockvarname="SMC_MOCK_RDMSR_${_msr}"
	# shellcheck disable=SC2086,SC1083
	if [ -n "$(eval echo \${$_mockvarname:-})" ]; then
		read_msr_value="$(eval echo \$$_mockvarname)"
		_debug "read_msr: MOCKING enabled for msr $_msr, returning $read_msr_value"
		mocked=1
		return $READ_MSR_RET_OK
	fi

	_mockvarname="SMC_MOCK_RDMSR_${_msr}_RET"
	# shellcheck disable=SC2086,SC1083
	if [ -n "$(eval echo \${$_mockvarname:-})" ] && [ "$(eval echo \$$_mockvarname)" -ne 0 ]; then
		_debug "read_msr: MOCKING enabled for msr $_msr func returns $(eval echo \$$_mockvarname)"
		mocked=1
		return "$(eval echo \$$_mockvarname)"
	fi

	if [ ! -e /dev/cpu/0/msr ] && [ ! -e /dev/cpuctl0 ]; then
		# try to load the module ourselves (and remember it so we can rmmod it afterwards)
		load_msr
	fi
	if [ ! -e /dev/cpu/0/msr ] && [ ! -e /dev/cpuctl0 ]; then
		read_msr_msg="is msr kernel module available?"
		return $READ_MSR_RET_ERR
	fi

	if [ "$os" != Linux ]; then
		# for BSD
		_msr=$(cpucontrol -m "$_msr" "/dev/cpuctl$_core" 2>/dev/null); ret=$?
		if [ $ret -ne 0 ]; then
			mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_RDMSR_${_msr}_RET=$READ_MSR_RET_KO")
			return $READ_MSR_RET_KO
		fi
		# MSR 0x10: 0x000003e1 0xb106dded
		_msr_h=$(echo "$_msr" | awk '{print $3}');
		_msr_l=$(echo "$_msr" | awk '{print $4}');
		read_msr_value=$(( _msr_h << 32 | _msr_l ))
	else
		# for Linux
		if [ ! -r /dev/cpu/"$_core"/msr ]; then
			mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_RDMSR_${_msr}_RET=$READ_MSR_RET_ERR")
			read_msr_msg="No read permission for /dev/cpu/$_core/msr"
			return $READ_MSR_RET_ERR
		# if rdmsr is available, use it
		elif command -v rdmsr >/dev/null 2>&1 && [ "${SMC_NO_RDMSR:-}" != 1 ]; then
			_debug "read_msr: using rdmsr on $_msr"
			read_msr_value=$(rdmsr -r $_msr_dec 2>/dev/null | od -t u8 -A n)
		# or if we have perl, use it, any 5.x version will work
		elif command -v perl >/dev/null 2>&1 && [ "${SMC_NO_PERL:-}" != 1 ]; then
			_debug "read_msr: using perl on $_msr"
			read_msr_value=$(perl -e "open(M,'<','/dev/cpu/$_core/msr') and seek(M,$_msr_dec,0) and read(M,\$_,8) and print" | od -t u8 -A n)
		# fallback to dd if it supports skip_bytes
		elif dd if=/dev/null of=/dev/null bs=8 count=1 skip="$_msr_dec" iflag=skip_bytes 2>/dev/null; then
			_debug "read_msr: using dd on $_msr"
			read_msr_value=$(dd if=/dev/cpu/"$_core"/msr bs=8 count=1 skip="$_msr_dec" iflag=skip_bytes 2>/dev/null | od -t u8 -A n)
		else
			_debug "read_msr: got no rdmsr, perl or recent enough dd!"
			mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_RDMSR_${_msr}_RET=$READ_MSR_RET_ERR")
			read_msr_msg='missing tool, install either msr-tools or perl'
			return $READ_MSR_RET_ERR
		fi
		if [ -z "$read_msr_value" ]; then
			# MSR doesn't exist, don't check for $? because some versions of dd still return 0!
			mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_RDMSR_${_msr}_RET=$READ_MSR_RET_KO")
			return $READ_MSR_RET_KO
		fi
		# remove sparse spaces od might give us
		read_msr_value=$(( read_msr_value ))
	fi
	mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_RDMSR_${_msr}='$read_msr_value'")
	_debug "read_msr: MSR=$_msr value is $read_msr_value"
	return $READ_MSR_RET_OK
}


parse_cpu_details()
{
	[ "${parse_cpu_details_done:-}" = 1 ] && return 0

	if command -v nproc >/dev/null; then
		number_of_cores=$(nproc)
	elif echo "$os" | grep -q BSD; then
		number_of_cores=$(sysctl -n hw.ncpu 2>/dev/null || echo 1)
	elif [ -e "$procfs/cpuinfo" ]; then
		number_of_cores=$(grep -c ^processor "$procfs/cpuinfo" 2>/dev/null || echo 1)
	else
		# if we don't know, default to 1 CPU
		number_of_cores=1
	fi
	max_core_id=$(( number_of_cores - 1 ))

	has_avx2=0
	has_avx512=0
	if [ -e "$procfs/cpuinfo" ]; then
		if grep -qw avx2 "$procfs/cpuinfo" 2>/dev/null; then has_avx2=1; fi
		if grep -qw avx512 "$procfs/cpuinfo" 2>/dev/null; then has_avx512=1; fi
		cpu_vendor=$(  grep '^vendor_id'  "$procfs/cpuinfo" | awk '{print $3}' | head -1)
		cpu_friendly_name=$(grep '^model name' "$procfs/cpuinfo" | cut -d: -f2- | head -1 | sed -e 's/^ *//')
		# special case for ARM follows
		if grep -qi 'CPU implementer[[:space:]]*:[[:space:]]*0x41' "$procfs/cpuinfo"; then
			cpu_vendor='ARM'
			# some devices (phones or other) have several ARMs and as such different part numbers,
			# an example is "bigLITTLE", so we need to store the whole list, this is needed for is_cpu_affected
			cpu_part_list=$(awk '/CPU part/         {print $4}' "$procfs/cpuinfo")
			cpu_arch_list=$(awk '/CPU architecture/ {print $3}' "$procfs/cpuinfo")
			# take the first one to fill the friendly name, do NOT quote the vars below
			# shellcheck disable=SC2086
			cpu_arch=$(echo $cpu_arch_list | awk '{ print $1 }')
			# shellcheck disable=SC2086
			cpu_part=$(echo $cpu_part_list | awk '{ print $1 }')
			[ "$cpu_arch" = "AArch64" ] && cpu_arch=8
			cpu_friendly_name="ARM"
			[ -n "$cpu_arch" ] && cpu_friendly_name="$cpu_friendly_name v$cpu_arch"
			[ -n "$cpu_part" ] && cpu_friendly_name="$cpu_friendly_name model $cpu_part"

		elif grep -qi 'CPU implementer[[:space:]]*:[[:space:]]*0x43' "$procfs/cpuinfo"; then
			cpu_vendor='CAVIUM'
		elif grep -qi 'CPU implementer[[:space:]]*:[[:space:]]*0x70' "$procfs/cpuinfo"; then
			cpu_vendor='PHYTIUM'
		fi

		cpu_family=$(  grep '^cpu family' "$procfs/cpuinfo" | awk '{print $4}' | grep -E '^[0-9]+$' | head -1)
		cpu_model=$(   grep '^model'      "$procfs/cpuinfo" | awk '{print $3}' | grep -E '^[0-9]+$' | head -1)
		cpu_stepping=$(grep '^stepping'   "$procfs/cpuinfo" | awk '{print $3}' | grep -E '^[0-9]+$' | head -1)
		cpu_ucode=$(   grep '^microcode'  "$procfs/cpuinfo" | awk '{print $3}' | head -1)
	else
		cpu_vendor=$( dmesg | grep -i -m1 'Origin=' | cut -f2 -w | cut -f2 -d= | cut -f2 -d\" )
		cpu_family=$( dmesg | grep -i -m1 'Family=' | cut -f4 -w | cut -f2 -d= )
		cpu_family=$(( cpu_family ))
		cpu_model=$( dmesg | grep -i -m1 'Model=' | cut -f5 -w | cut -f2 -d= )
		cpu_model=$(( cpu_model ))
		cpu_stepping=$( dmesg | grep -i -m1 'Stepping=' | cut -f6 -w | cut -f2 -d= )
		cpu_friendly_name=$(sysctl -n hw.model 2>/dev/null)
	fi

	# Intel processors have a 3bit Platform ID field in MSR(17H) that specifies the platform type for up to 8 types
	# see https://elixir.bootlin.com/linux/v6.0/source/arch/x86/kernel/cpu/microcode/intel.c#L694
	# Set it to 8 (impossible value as it is 3 bit long) by default
	cpu_platformid=8
	if [ "$cpu_vendor" = GenuineIntel ] && [ "$cpu_model" -ge 5 ]; then
		read_msr 0x17; ret=$?
		if [ $ret = $READ_MSR_RET_OK ]; then
			cpu_platformid=$(( 1 << ( (read_msr_value >> 18) & 7) ))
		fi
	fi

	if [ -n "${SMC_MOCK_CPU_FRIENDLY_NAME:-}" ]; then
		cpu_friendly_name="$SMC_MOCK_CPU_FRIENDLY_NAME"
		_debug "parse_cpu_details: MOCKING cpu friendly name to $cpu_friendly_name"
		mocked=1
	else
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_CPU_FRIENDLY_NAME='$cpu_friendly_name'")
	fi
	if [ -n "${SMC_MOCK_CPU_VENDOR:-}" ]; then
		cpu_vendor="$SMC_MOCK_CPU_VENDOR"
		_debug "parse_cpu_details: MOCKING cpu vendor to $cpu_vendor"
		mocked=1
	else
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_CPU_VENDOR='$cpu_vendor'")
	fi
	if [ -n "${SMC_MOCK_CPU_FAMILY:-}" ]; then
		cpu_family="$SMC_MOCK_CPU_FAMILY"
		_debug "parse_cpu_details: MOCKING cpu family to $cpu_family"
		mocked=1
	else
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_CPU_FAMILY='$cpu_family'")
	fi
	if [ -n "${SMC_MOCK_CPU_MODEL:-}" ]; then
		cpu_model="$SMC_MOCK_CPU_MODEL"
		_debug "parse_cpu_details: MOCKING cpu model to $cpu_model"
		mocked=1
	else
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_CPU_MODEL='$cpu_model'")
	fi
	if [ -n "${SMC_MOCK_CPU_STEPPING:-}" ]; then
		cpu_stepping="$SMC_MOCK_CPU_STEPPING"
		_debug "parse_cpu_details: MOCKING cpu stepping to $cpu_stepping"
		mocked=1
	else
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_CPU_STEPPING='$cpu_stepping'")
	fi
	if [ -n "${SMC_MOCK_CPU_PLATFORMID:-}" ]; then
		cpu_platformid="$SMC_MOCK_CPU_PLATFORMID"
		_debug "parse_cpu_details: MOCKING cpu platformid name to $cpu_platformid"
		mocked=1
	else
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_CPU_PLATFORMID='$cpu_platformid'")
	fi

	# get raw cpuid, it's always useful (referenced in the Intel doc for firmware updates for example)
	if [ "$mocked" != 1 ] && read_cpuid 0x1 0x0 $EAX 0 0xFFFFFFFF; then
		cpu_cpuid="$read_cpuid_value"
	else
		# try to build it by ourselves
		_debug "parse_cpu_details: build the CPUID by ourselves"
		cpu_cpuid=$(fms2cpuid "$cpu_family" "$cpu_model" "$cpu_stepping")
	fi

	# under BSD, linprocfs often doesn't export ucode information, so fetch it ourselves the good old way
	if [ -z "$cpu_ucode" ] && [ "$os" != Linux ]; then
		load_cpuid
		if [ -e /dev/cpuctl0 ]; then
			# init MSR with NULLs
			cpucontrol -m 0x8b=0 /dev/cpuctl0
			# call CPUID
			cpucontrol -i 1 /dev/cpuctl0 >/dev/null
			# read MSR
			cpu_ucode=$(cpucontrol -m 0x8b /dev/cpuctl0 | awk '{print $3}')
			# convert to decimal
			cpu_ucode=$(( cpu_ucode ))
			# convert back to hex
			cpu_ucode=$(printf "0x%x" "$cpu_ucode")
		fi
	fi

	# if we got no cpu_ucode (e.g. we're in a vm), fall back to 0x0
	: "${cpu_ucode:=0x0}"

	if [ -n "${SMC_MOCK_CPU_UCODE:-}" ]; then
		cpu_ucode="$SMC_MOCK_CPU_UCODE"
		_debug "parse_cpu_details: MOCKING cpu ucode to $cpu_ucode"
		mocked=1
	else
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_CPU_UCODE='$cpu_ucode'")
	fi

	echo "$cpu_ucode" | grep -q ^0x && cpu_ucode=$(( cpu_ucode ))
	ucode_found=$(printf "family 0x%x model 0x%x stepping 0x%x ucode 0x%x cpuid 0x%x pfid 0x%x" \
		"$cpu_family" "$cpu_model" "$cpu_stepping" "$cpu_ucode" "$cpu_cpuid" "$cpu_platformid")

	# also define those that we will need in other funcs
	# taken from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/x86/include/asm/intel-family.h
	# curl -s 'https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/arch/x86/include/asm/intel-family.h' | awk '/#define INTEL_FAM6/ {print $2"=$(( "$3" )) # "$4,$5,$6,$7,$8,$9}' | sed -re 's/ +$//'
	# shellcheck disable=SC2034
	{
	INTEL_FAM6_CORE_YONAH=$(( 0x0E )) #
	INTEL_FAM6_CORE2_MEROM=$(( 0x0F )) #
	INTEL_FAM6_CORE2_MEROM_L=$(( 0x16 )) #
	INTEL_FAM6_CORE2_PENRYN=$(( 0x17 )) #
	INTEL_FAM6_CORE2_DUNNINGTON=$(( 0x1D )) #
	INTEL_FAM6_NEHALEM=$(( 0x1E )) #
	INTEL_FAM6_NEHALEM_G=$(( 0x1F )) # /* Auburndale / Havendale */
	INTEL_FAM6_NEHALEM_EP=$(( 0x1A )) #
	INTEL_FAM6_NEHALEM_EX=$(( 0x2E )) #
	INTEL_FAM6_WESTMERE=$(( 0x25 )) #
	INTEL_FAM6_WESTMERE_EP=$(( 0x2C )) #
	INTEL_FAM6_WESTMERE_EX=$(( 0x2F )) #
	INTEL_FAM6_SANDYBRIDGE=$(( 0x2A )) #
	INTEL_FAM6_SANDYBRIDGE_X=$(( 0x2D )) #
	INTEL_FAM6_IVYBRIDGE=$(( 0x3A )) #
	INTEL_FAM6_IVYBRIDGE_X=$(( 0x3E )) #
	INTEL_FAM6_HASWELL=$(( 0x3C )) #
	INTEL_FAM6_HASWELL_X=$(( 0x3F )) #
	INTEL_FAM6_HASWELL_L=$(( 0x45 )) #
	INTEL_FAM6_HASWELL_G=$(( 0x46 )) #
	INTEL_FAM6_BROADWELL=$(( 0x3D )) #
	INTEL_FAM6_BROADWELL_G=$(( 0x47 )) #
	INTEL_FAM6_BROADWELL_X=$(( 0x4F )) #
	INTEL_FAM6_BROADWELL_D=$(( 0x56 )) #
	INTEL_FAM6_SKYLAKE_L=$(( 0x4E )) # /* Sky Lake */
	INTEL_FAM6_SKYLAKE=$(( 0x5E )) # /* Sky Lake */
	INTEL_FAM6_SKYLAKE_X=$(( 0x55 )) # /* Sky Lake */
	INTEL_FAM6_KABYLAKE_L=$(( 0x8E )) # /* Sky Lake */
	INTEL_FAM6_KABYLAKE=$(( 0x9E )) # /* Sky Lake */
	INTEL_FAM6_COMETLAKE=$(( 0xA5 )) # /* Sky Lake */
	INTEL_FAM6_COMETLAKE_L=$(( 0xA6 )) # /* Sky Lake */
	INTEL_FAM6_CANNONLAKE_L=$(( 0x66 )) # /* Palm Cove */
	INTEL_FAM6_ICELAKE_X=$(( 0x6A )) # /* Sunny Cove */
	INTEL_FAM6_ICELAKE_D=$(( 0x6C )) # /* Sunny Cove */
	INTEL_FAM6_ICELAKE=$(( 0x7D )) # /* Sunny Cove */
	INTEL_FAM6_ICELAKE_L=$(( 0x7E )) # /* Sunny Cove */
	INTEL_FAM6_ICELAKE_NNPI=$(( 0x9D )) # /* Sunny Cove */
	INTEL_FAM6_LAKEFIELD=$(( 0x8A )) # /* Sunny Cove / Tremont */
	INTEL_FAM6_ROCKETLAKE=$(( 0xA7 )) # /* Cypress Cove */
	INTEL_FAM6_TIGERLAKE_L=$(( 0x8C )) # /* Willow Cove */
	INTEL_FAM6_TIGERLAKE=$(( 0x8D )) # /* Willow Cove */
	INTEL_FAM6_SAPPHIRERAPIDS_X=$(( 0x8F )) # /* Golden Cove */
	INTEL_FAM6_ALDERLAKE=$(( 0x97 )) # /* Golden Cove / Gracemont */
	INTEL_FAM6_ALDERLAKE_L=$(( 0x9A )) # /* Golden Cove / Gracemont */
	INTEL_FAM6_RAPTORLAKE=$(( 0xB7 )) #
	INTEL_FAM6_ATOM_BONNELL=$(( 0x1C )) # /* Diamondville, Pineview */
	INTEL_FAM6_ATOM_BONNELL_MID=$(( 0x26 )) # /* Silverthorne, Lincroft */
	INTEL_FAM6_ATOM_SALTWELL=$(( 0x36 )) # /* Cedarview */
	INTEL_FAM6_ATOM_SALTWELL_MID=$(( 0x27 )) # /* Penwell */
	INTEL_FAM6_ATOM_SALTWELL_TABLET=$(( 0x35 )) # /* Cloverview */
	INTEL_FAM6_ATOM_SILVERMONT=$(( 0x37 )) # /* Bay Trail, Valleyview */
	INTEL_FAM6_ATOM_SILVERMONT_D=$(( 0x4D )) # /* Avaton, Rangely */
	INTEL_FAM6_ATOM_SILVERMONT_MID=$(( 0x4A )) # /* Merriefield */
	INTEL_FAM6_ATOM_AIRMONT=$(( 0x4C )) # /* Cherry Trail, Braswell */
	INTEL_FAM6_ATOM_AIRMONT_MID=$(( 0x5A )) # /* Moorefield */
	INTEL_FAM6_ATOM_AIRMONT_NP=$(( 0x75 )) # /* Lightning Mountain */
	INTEL_FAM6_ATOM_GOLDMONT=$(( 0x5C )) # /* Apollo Lake */
	INTEL_FAM6_ATOM_GOLDMONT_D=$(( 0x5F )) # /* Denverton */
	INTEL_FAM6_ATOM_GOLDMONT_PLUS=$(( 0x7A )) # /* Gemini Lake */
	INTEL_FAM6_ATOM_TREMONT_D=$(( 0x86 )) # /* Jacobsville */
	INTEL_FAM6_ATOM_TREMONT=$(( 0x96 )) # /* Elkhart Lake */
	INTEL_FAM6_ATOM_TREMONT_L=$(( 0x9C )) # /* Jasper Lake */
	INTEL_FAM6_XEON_PHI_KNL=$(( 0x57 )) # /* Knights Landing */
	INTEL_FAM6_XEON_PHI_KNM=$(( 0x85 )) # /* Knights Mill */
	}
	parse_cpu_details_done=1
}
is_hygon()
{
	parse_cpu_details
	[ "$cpu_vendor" = HygonGenuine ] && return 0
	return 1
}

is_amd()
{
	parse_cpu_details
	[ "$cpu_vendor" = AuthenticAMD ] && return 0
	return 1
}

is_intel()
{
	parse_cpu_details
	[ "$cpu_vendor" = GenuineIntel ] && return 0
	return 1
}

is_cpu_smt_enabled()
{
	# SMT / HyperThreading is enabled if siblings != cpucores
	if [ -e "$procfs/cpuinfo" ]; then
		_siblings=$(awk '/^siblings/  {print $3;exit}' "$procfs/cpuinfo")
		_cpucores=$(awk '/^cpu cores/ {print $4;exit}' "$procfs/cpuinfo")
		if [ -n "$_siblings" ] && [ -n "$_cpucores" ]; then
			if [ "$_siblings" = "$_cpucores" ]; then
				return 1
			else
				return 0
			fi
		fi
	fi
	# we can't tell
	return 2
}

is_ucode_blacklisted()
{
	parse_cpu_details
	# if it's not an Intel, don't bother: it's not blacklisted
	is_intel || return 1
	# it also needs to be family=6
	[ "$cpu_family" = 6 ] || return 1
	# now, check each known bad microcode
	# source: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/x86/kernel/cpu/intel.c#n105
	# 2018-02-08 update: https://newsroom.intel.com/wp-content/uploads/sites/11/2018/02/microcode-update-guidance.pdf
	# model,stepping,microcode
	for tuple in \
		$INTEL_FAM6_KABYLAKE,0x0B,0x80 \
		$INTEL_FAM6_KABYLAKE,0x0A,0x80 \
		$INTEL_FAM6_KABYLAKE,0x09,0x80 \
		$INTEL_FAM6_KABYLAKE_L,0x0A,0x80  \
		$INTEL_FAM6_KABYLAKE_L,0x09,0x80  \
		$INTEL_FAM6_SKYLAKE_X,0x03,0x0100013e  \
		$INTEL_FAM6_SKYLAKE_X,0x04,0x02000036  \
		$INTEL_FAM6_SKYLAKE_X,0x04,0x0200003a  \
		$INTEL_FAM6_SKYLAKE_X,0x04,0x0200003c  \
		$INTEL_FAM6_BROADWELL,0x04,0x28   \
		$INTEL_FAM6_BROADWELL_G,0x01,0x1b   \
		$INTEL_FAM6_BROADWELL_D,0x02,0x14 \
		$INTEL_FAM6_BROADWELL_D,0x03,0x07000011 \
		$INTEL_FAM6_BROADWELL_X,0x01,0x0b000025 \
		$INTEL_FAM6_HASWELL_L,0x01,0x21        \
		$INTEL_FAM6_HASWELL_G,0x01,0x18     \
		$INTEL_FAM6_HASWELL,0x03,0x23     \
		$INTEL_FAM6_HASWELL_X,0x02,0x3b        \
		$INTEL_FAM6_HASWELL_X,0x04,0x10        \
		$INTEL_FAM6_IVYBRIDGE_X,0x04,0x42a     \
		$INTEL_FAM6_SANDYBRIDGE_X,0x06,0x61b   \
		$INTEL_FAM6_SANDYBRIDGE_X,0x07,0x712
	do
		model=$(echo "$tuple" | cut -d, -f1)
		stepping=$(( $(echo "$tuple" | cut -d, -f2) ))
		if [ "$cpu_model" = "$model" ] && [ "$cpu_stepping" = "$stepping" ]; then
			ucode=$(( $(echo "$tuple" | cut -d, -f3) ))
			if [ "$cpu_ucode" = "$ucode" ]; then
				_debug "is_ucode_blacklisted: we have a match! ($cpu_model/$cpu_stepping/$cpu_ucode)"
				return 0
			fi
		fi
	done

	# 2024-01-09 update: https://github.com/speed47/spectre-meltdown-checker/issues/475
	# this time the tuple is cpuid,microcode
	for tuple in \
		0xB0671,0x119  \
		0xB06A2,0x4119 \
		0xB06A3,0x4119
	do
		cpuid=$(( $(echo "$tuple" | cut -d, -f1) ))
		ucode=$(( $(echo "$tuple" | cut -d, -f2) ))
		if [ "$cpu_cpuid" = "$cpuid" ] && [ "$cpu_ucode" = "$ucode" ]; then
			_debug "is_ucode_blacklisted: we have a match! ($cpuid/$ucode)"
			return 0
		fi
	done

	_debug "is_ucode_blacklisted: no ($cpu_model/$cpu_stepping/$cpu_ucode)"
	return 1
}

is_skylake_cpu()
{
	# is this a skylake cpu?
	# return 0 if yes, 1 otherwise
	#if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
	#		boot_cpu_data.x86 == 6) {
	#		switch (boot_cpu_data.x86_model) {
	#		case INTEL_FAM6_SKYLAKE_MOBILE:
	#		case INTEL_FAM6_SKYLAKE_DESKTOP:
	#		case INTEL_FAM6_SKYLAKE_X:
	#		case INTEL_FAM6_KABYLAKE_MOBILE:
	#		case INTEL_FAM6_KABYLAKE_DESKTOP:
	#			return true;
	parse_cpu_details
	is_intel || return 1
	[ "$cpu_family" = 6 ] || return 1
	if [ "$cpu_model" = $INTEL_FAM6_SKYLAKE_L       ] || \
		[ "$cpu_model" = $INTEL_FAM6_SKYLAKE    ] || \
		[ "$cpu_model" = $INTEL_FAM6_SKYLAKE_X  ] || \
		[ "$cpu_model" = $INTEL_FAM6_KABYLAKE_L ] || \
		[ "$cpu_model" = $INTEL_FAM6_KABYLAKE   ]; then
		return 0
	fi
	return 1
}

is_vulnerable_to_empty_rsb()
{
	if is_intel && [ -z "$capabilities_rsba" ]; then
		_warn "is_vulnerable_to_empty_rsb() called before ARCH CAPABILITIES MSR was read"
	fi
	if is_skylake_cpu || [ "$capabilities_rsba" = 1 ]; then
		return 0
	fi
	return 1
}

is_zen_cpu()
{
	# is this CPU from the AMD ZEN family ? (ryzen, epyc, ...)
	parse_cpu_details
	is_amd || return 1
	[ "$cpu_family" = 23 ] && return 0
	return 1
}

is_moksha_cpu()
{
	parse_cpu_details
	is_hygon || return 1
	[ "$cpu_family" = 24 ] && return 0
	return 1
}

# mimick the Linux macro
##define AMD_MODEL_RANGE(f, m_start, s_start, m_end, s_end) \
#	((f << 24) | (m_start << 16) | (s_start << 12) | (m_end << 4) | (s_end))
amd_model_range()
{
	echo $(( ($1 << 24) | ($2 << 16) | ($3 << 12) | ($4 << 4) | ($5) ))
}

# mimick the Linux func, usage:
# amd_legacy_erratum $(amd_model_range 0x17 0x30 0x0 0x4f 0xf)
# return true (0) if the current CPU is affected by this erratum, 1 otherwise
amd_legacy_erratum()
{
	_range="$1"
	_ms=$((cpu_model << 4 | cpu_stepping))
	if [ "$cpu_family" = $(( ( (_range) >> 24) & 0xff )) ] && \
		[ $_ms -ge $(( ( (_range) >> 12) & 0xfff )) ] && \
		[ $_ms -le $(( (_range) & 0xfff )) ]; then
		return 0
	fi
	return 1
}

# returns 0 (true) if yes, 1 otherwise
# returns 2 if not applicable
has_zenbleed_fixed_firmware()
{
	# return cached data
	[ -n "$zenbleed_fw" ] && return "$zenbleed_fw"
	# or compute it:
	zenbleed_fw=2 # unknown
	# only amd
	if ! is_amd; then
		zenbleed_fw=1
		return $zenbleed_fw
	fi
	# list of known fixed firmwares, from commit 522b1d69219d8f083173819fde04f994aa051a98
	_tuples="
		0x30,0x3f,0x0830107a
		0x60,0x67,0x0860010b
		0x68,0x6f,0x08608105
		0x70,0x7f,0x08701032
		0xa0,0xaf,0x08a00008
	"
	for tuple in $_tuples; do
		_model_low=$( echo "$tuple" | cut -d, -f1)
		_model_high=$(echo "$tuple" | cut -d, -f2)
		_fwver=$(     echo "$tuple" | cut -d, -f3)
		if [ $((cpu_model)) -ge $((_model_low)) ] && [ $((cpu_model)) -le $((_model_high)) ]; then
			if [ $((cpu_ucode)) -ge $((_fwver)) ]; then
				zenbleed_fw=0 # true
				break
			else
				zenbleed_fw=1 # false
				zenbleed_fw_required=$_fwver
			fi
		fi
	done
	unset _tuples
	return $zenbleed_fw
}

# Test if the current host is a Xen PV Dom0 / DomU
is_xen() {
	if [ ! -d "$procfs/xen" ]; then
		return 1
	fi

	# XXX do we have a better way that relying on dmesg?
	dmesg_grep 'Booting paravirtualized kernel on Xen$'; ret=$?
	if [ $ret -eq 2 ]; then
		_warn "dmesg truncated, Xen detection will be unreliable. Please reboot and relaunch this script"
		return 1
	elif [ $ret -eq 0 ]; then
		return 0
	else
		return 1
	fi
}

is_xen_dom0()
{
	if ! is_xen; then
		return 1
	fi

	if [ -e "$procfs/xen/capabilities" ] && grep -q "control_d" "$procfs/xen/capabilities"; then
		return 0
	else
		return 1
	fi
}

is_xen_domU()
{
	if ! is_xen; then
		return 1
	fi

	# PVHVM guests also print 'Booting paravirtualized kernel', so we need this check.
	dmesg_grep 'Xen HVM callback vector for event delivery is enabled$'; ret=$?
	if [ $ret -eq 0 ]; then
		return 1
	fi

	if ! is_xen_dom0; then
		return 0
	else
		return 1
	fi
}

builtin_dbversion=$(awk '/^# %%% MCEDB / { print $4 }' "$0")
if [ -r "$mcedb_cache" ]; then
	# we have a local cache file, but it might be older than the builtin version we have
	local_dbversion=$(  awk '/^# %%% MCEDB / { print $4 }' "$mcedb_cache")
	# sort -V sorts by version number
	older_dbversion=$(printf "%b\n%b" "$local_dbversion" "$builtin_dbversion" | sort -V | head -n1)
	if [ "$older_dbversion" = "$builtin_dbversion" ]; then
		mcedb_source="$mcedb_cache"
		mcedb_info="local firmwares DB $local_dbversion"
	fi
fi
# if mcedb_source is not set, either we don't have a local cached db, or it is older than the builtin db
if [ -z "${mcedb_source:-}" ]; then
	mcedb_source="$0"
	mcedb_info="builtin firmwares DB $builtin_dbversion"
fi
read_mcedb()
{
	awk '{ if (DELIM==1) { print $2 } } /^# %%% MCEDB / { DELIM=1 }' "$mcedb_source"
}

read_inteldb()
{
	if [ "$opt_intel_db" = 1 ]; then
		awk '/^# %%% ENDOFINTELDB/ { exit } { if (DELIM==1) { print $2 } } /^# %%% INTELDB/ { DELIM=1 }' "$0"
	fi
	# otherwise don't output nothing, it'll be as if the database is empty
}

is_latest_known_ucode()
{
	# 0: yes, 1: no, 2: unknown
	parse_cpu_details
	if [ "$cpu_cpuid" = 0 ]; then
		ucode_latest="couldn't get your cpuid"
		return 2
	fi
	ucode_latest="latest microcode version for your CPU model is unknown"
	if is_intel; then
		cpu_brand_prefix=I
	elif is_amd; then
		cpu_brand_prefix=A
	else
		return 2
	fi
	for tuple in $(read_mcedb | grep "$(printf "^$cpu_brand_prefix,0x%08X," "$cpu_cpuid")")
	do
		# skip if the pfmask doesn't match our platformid
		pfmask=$(echo "$tuple" | cut -d, -f3)
		if is_intel && [ $((cpu_platformid & pfmask)) -eq 0 ]; then
			continue
		fi
		ucode=$((  $(echo "$tuple" | cut -d, -f4) ))
		ucode_date=$(echo "$tuple" | cut -d, -f5 | sed -r 's=(....)(..)(..)=\1/\2/\3=')
		_debug "is_latest_known_ucode: with cpuid $cpu_cpuid has ucode $cpu_ucode, last known is $ucode from $ucode_date"
		ucode_latest=$(printf "latest version is 0x%x dated $ucode_date according to $mcedb_info" "$ucode")
		if [ "$cpu_ucode" -ge "$ucode" ]; then
			return 0
		else
			return 1
		fi
	done
	_debug "is_latest_known_ucode: this cpuid is not referenced ($cpu_cpuid)"
	return 2
}

get_cmdline()
{
	if [ -n "${kernel_cmdline:-}" ]; then
		return
	fi

	if [ -n "${SMC_MOCK_CMDLINE:-}" ]; then
		mocked=1
		_debug "get_cmdline: using mocked cmdline '$SMC_MOCK_CMDLINE'"
		kernel_cmdline="$SMC_MOCK_CMDLINE"
		return
	else
		kernel_cmdline=$(cat "$procfs/cmdline")
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_CMDLINE='$kernel_cmdline'")
	fi
}

# ENTRYPOINT

# we can't do anything useful under WSL
if uname -a | grep -qE -- '-Microsoft #[0-9]+-Microsoft '; then
	_warn "This script doesn't work under Windows Subsystem for Linux"
	_warn "You should use the official Microsoft tool instead."
	_warn "It can be found under https://aka.ms/SpeculationControlPS"
	exit 1
fi

# or other UNIX-ish OSes non-Linux non-supported-BSDs
if [ "$os" = Darwin ] || [ "$os" = VMkernel ]; then
	_warn "You're running under the $os OS, but this script"
	_warn "only works under Linux and some BSD systems, sorry."
	_warn "Please read the README and FAQ for more information."
	exit 1
fi

# check for mode selection inconsistency
if [ "$opt_hw_only" = 1 ]; then
	if [ "$opt_cve_all" = 0 ]; then
		show_usage
		echo "$0: error: incompatible modes specified, --hw-only vs --variant" >&2
		exit 255
	else
		opt_cve_all=0
		opt_cve_list=''
	fi
fi

# coreos mode
if [ "$opt_coreos" = 1 ]; then
	if ! is_coreos; then
		_warn "CoreOS mode asked, but we're not under CoreOS!"
		exit 255
	fi
	_warn "CoreOS mode, starting an ephemeral toolbox to launch the script"
	load_msr
	load_cpuid
	mount_debugfs
	toolbox --ephemeral --bind-ro /dev/cpu:/dev/cpu -- sh -c "dnf install -y binutils which && /media/root$PWD/$0 $* --coreos-within-toolbox"
	exitcode=$?
	exit $exitcode
else
	if is_coreos; then
		_warn "You seem to be running CoreOS, you might want to use the --coreos option for better results"
		_warn
	fi
fi

# if we're under a BSD, try to mount linprocfs for "$procfs/cpuinfo"
procfs=/proc
if echo "$os" | grep -q BSD; then
	_debug "We're under BSD, check if we have procfs"
	procfs=$(mount | awk '/^linprocfs/ { print $3; exit; }')
	if [ -z "$procfs" ]; then
		_debug "we don't, try to mount it"
		procfs=/proc
		[ -d /compat/linux/proc ] && procfs=/compat/linux/proc
		test -d $procfs || mkdir $procfs
		if mount -t linprocfs linprocfs $procfs 2>/dev/null; then
			mounted_procfs=1
			_debug "procfs just mounted at $procfs"
		else
			procfs=''
		fi
	else
		_debug "We do: $procfs"
	fi
fi

# define a few vars we might reference later without these being inited
mockme=''
mocked=0
specex_knob_dir=/dev/no_valid_path

# if /tmp doesn't exist and TMPDIR is not set, try to set it to a sane default for Android
if [ -z "${TMPDIR:-}" ] && ! [ -d "/tmp" ] && [ -d "/data/local/tmp" ]; then
	TMPDIR=/data/local/tmp
	export TMPDIR
fi

parse_cpu_details
get_cmdline

if [ "$opt_cpu" != all ] && [ "$opt_cpu" -gt "$max_core_id" ]; then
	echo "$0: error: --cpu can't be higher than $max_core_id, got $opt_cpu" >&2
	exit 255
fi

if [ "$opt_live" = 1 ]; then
	_info "Checking for vulnerabilities on current system"
	_info "Kernel is \033[35m$os $(uname -r) $(uname -v) $(uname -m)\033[0m"
	_info "CPU is \033[35m$cpu_friendly_name\033[0m"

	# try to find the image of the current running kernel
	if [ -n "$opt_kernel" ]; then
		# specified by user on cmdline, with --live, don't override
		:
	# first, look for the BOOT_IMAGE hint in the kernel cmdline
	elif echo "$kernel_cmdline" | grep -q 'BOOT_IMAGE='; then
		opt_kernel=$(echo "$kernel_cmdline" | grep -Eo 'BOOT_IMAGE=[^ ]+' | cut -d= -f2)
		_debug "found opt_kernel=$opt_kernel in $procfs/cmdline"
		# if the boot partition is within a btrfs subvolume, strip the subvolume name
		# if /boot is a separate subvolume, the remainder of the code in this section should handle it
		if echo "$opt_kernel" | grep -q "^/@"; then opt_kernel=$(echo "$opt_kernel" | sed "s:/@[^/]*::"); fi
		# if we have a dedicated /boot partition, our bootloader might have just called it /
		# so try to prepend /boot and see if we find anything
		[ -e "/boot/$opt_kernel" ] && opt_kernel="/boot/$opt_kernel"
		# special case for CoreOS if we're inside the toolbox
		[ -e "/media/root/boot/$opt_kernel" ] && opt_kernel="/media/root/boot/$opt_kernel"
		_debug "opt_kernel is now $opt_kernel"
		# else, the full path is already there (most probably /boot/something)
	fi
	# if we didn't find a kernel, default to guessing
	if [ ! -e "$opt_kernel" ]; then
		# Fedora:
		[ -e "/lib/modules/$(uname -r)/vmlinuz" ] && opt_kernel="/lib/modules/$(uname -r)/vmlinuz"
		# Slackware:
		[ -e "/boot/vmlinuz"             ] && opt_kernel="/boot/vmlinuz"
		# Arch aarch64:
		[ -e "/boot/Image"               ] && opt_kernel="/boot/Image"
		# Arch armv5/armv7:
		[ -e "/boot/zImage"              ] && opt_kernel="/boot/zImage"
		# Arch arm7:
		[ -e "/boot/kernel7.img"         ] && opt_kernel="/boot/kernel7.img"
		# Linux-Libre:
		[ -e "/boot/vmlinuz-linux-libre" ] && opt_kernel="/boot/vmlinuz-linux-libre"
		# pine64
		[ -e "/boot/pine64/Image"        ] && opt_kernel="/boot/pine64/Image"
		# generic:
		[ -e "/boot/vmlinuz-$(uname -r)" ] && opt_kernel="/boot/vmlinuz-$(uname -r)"
		[ -e "/boot/kernel-$( uname -r)" ] && opt_kernel="/boot/kernel-$( uname -r)"
		[ -e "/boot/bzImage-$(uname -r)" ] && opt_kernel="/boot/bzImage-$(uname -r)"
		# Gentoo:
		[ -e "/boot/kernel-genkernel-$(uname -m)-$(uname -r)" ] && opt_kernel="/boot/kernel-genkernel-$(uname -m)-$(uname -r)"
		# NixOS:
		[ -e "/run/booted-system/kernel" ] && opt_kernel="/run/booted-system/kernel"
		# Guix System:
		[ -e "/run/booted-system/kernel/bzImage" ] && opt_kernel="/run/booted-system/kernel/bzImage"
		# systemd kernel-install:
		[ -e "/etc/machine-id" ] && [ -e "/boot/$(cat /etc/machine-id)/$(uname -r)/linux" ] && opt_kernel="/boot/$(cat /etc/machine-id)/$(uname -r)/linux"
		# Clear Linux:
		str_uname=$(uname -r)
		clear_linux_kernel="/lib/kernel/org.clearlinux.${str_uname##*.}.${str_uname%.*}"
		[ -e "$clear_linux_kernel" ] && opt_kernel=$clear_linux_kernel
		# Custom Arch seems to have the kernel path in its cmdline in the form "\directory\kernelimage",
		# with actual \'s instead of /'s:
		custom_arch_kernel=$(echo "$kernel_cmdline" | grep -Eo "(^|\s)\\\\[\\\\a-zA-Z0-9_.-]+" | tr "\\\\" "/" | tr -d '[:space:]')
		if [ -n "$custom_arch_kernel" ] && [ -e "$custom_arch_kernel" ]; then
			opt_kernel="$custom_arch_kernel"
		fi
		# FreeBSD:
		[ -e "/boot/kernel/kernel" ] && opt_kernel="/boot/kernel/kernel"
	fi

	# system.map
	if [ -n "$opt_map" ]; then
		# specified by user on cmdline, with --live, don't override
		:
	elif [ -e "$procfs/kallsyms" ] ; then
		opt_map="$procfs/kallsyms"
	elif [ -e "/lib/modules/$(uname -r)/System.map" ] ; then
		opt_map="/lib/modules/$(uname -r)/System.map"
	elif [ -e "/boot/System.map-$(uname -r)" ] ; then
		opt_map="/boot/System.map-$(uname -r)"
	elif [ -e "/lib/kernel/System.map-$(uname -r)" ]; then
		opt_map="/lib/kernel/System.map-$(uname -r)"
	fi

	# config
	if [ -n "$opt_config" ]; then
		# specified by user on cmdline, with --live, don't override
		:
	elif [ -e "$procfs/config.gz" ] ; then
		dumped_config="$(mktemp -t smc-config-XXXXXX)"
		gunzip -c "$procfs/config.gz" > "$dumped_config"
		# dumped_config will be deleted at the end of the script
		opt_config="$dumped_config"
	elif [ -e "/lib/modules/$(uname -r)/config" ]; then
		opt_config="/lib/modules/$(uname -r)/config"
	elif [ -e "/boot/config-$(uname -r)" ]; then
		opt_config="/boot/config-$(uname -r)"
	elif [ -e "/etc/kernels/kernel-config-$(uname -m)-$(uname -r)" ]; then
		opt_config="/etc/kernels/kernel-config-$(uname -m)-$(uname -r)"
	elif [ -e "/lib/kernel/config-$(uname -r)" ]; then
		opt_config="/lib/kernel/config-$(uname -r)"
	fi
else
	_info "Checking for vulnerabilities against specified kernel"
	_info "CPU is \033[35m$cpu_friendly_name\033[0m"
fi

if [ -n "$opt_kernel" ]; then
	_verbose "Will use kernel image \033[35m$opt_kernel\033[0m"
else
	_verbose "Will use no kernel image (accuracy might be reduced)"
	bad_accuracy=1
fi

if [ "$os" = Linux ]; then
	if [ -n "$opt_config" ] && ! grep -q '^CONFIG_' "$opt_config"; then
		# given file is invalid!
		_warn "The kernel config file seems invalid, was expecting a plain-text file, ignoring it!"
		opt_config=''
	fi

	if [ -n "${dumped_config:-}" ] && [ -n "$opt_config" ]; then
		_verbose "Will use kconfig \033[35m$procfs/config.gz (decompressed)\033[0m"
	elif [ -n "$opt_config" ]; then
		_verbose "Will use kconfig \033[35m$opt_config\033[0m"
	else
		_verbose "Will use no kconfig (accuracy might be reduced)"
		bad_accuracy=1
	fi

	if [ -n "$opt_map" ]; then
		_verbose "Will use System.map file \033[35m$opt_map\033[0m"
	else
		_verbose "Will use no System.map file (accuracy might be reduced)"
		bad_accuracy=1
	fi

	if [ "${bad_accuracy:=0}" = 1 ]; then
		_warn "We're missing some kernel info (see -v), accuracy might be reduced"
	fi
fi

if [ -e "$opt_kernel" ]; then
	if ! command -v "${opt_arch_prefix}readelf" >/dev/null 2>&1; then
		_debug "readelf not found"
		kernel_err="missing '${opt_arch_prefix}readelf' tool, please install it, usually it's in the 'binutils' package"
	elif [ "$opt_sysfs_only" = 1 ] || [ "$opt_hw_only" = 1 ]; then
		kernel_err='kernel image decompression skipped'
	else
		extract_kernel "$opt_kernel"
	fi
else
	_debug "no opt_kernel defined"
	kernel_err="couldn't find your kernel image in /boot, if you used netboot, this is normal"
fi
if [ -z "$kernel" ] || [ ! -r "$kernel" ]; then
	[ -z "$kernel_err" ] && kernel_err="couldn't extract your kernel from $opt_kernel"
else
	# vanilla kernels have with ^Linux version
	# also try harder with some kernels (such as Red Hat) that don't have ^Linux version before their version string
	# and check for FreeBSD
	kernel_version=$("${opt_arch_prefix}strings" "$kernel" 2>/dev/null | grep -E \
		-e '^Linux version ' \
		-e '^[[:alnum:]][^[:space:]]+ \([^[:space:]]+\) #[0-9]+ .+ (19|20)[0-9][0-9]$' \
		-e '^FreeBSD [0-9]' | grep -v 'ABI compat' | head -1)
	if [ -z "$kernel_version" ]; then
		# try even harder with some kernels (such as ARM) that split the release (uname -r) and version (uname -v) in 2 adjacent strings
		kernel_version=$("${opt_arch_prefix}strings" "$kernel" 2>/dev/null | grep -E -B1 '^#[0-9]+ .+ (19|20)[0-9][0-9]$' | tr "\n" " ")
	fi
	if [ -n "$kernel_version" ]; then
		# in live mode, check if the img we found is the correct one
		if [ "$opt_live" = 1 ]; then
			_verbose "Kernel image is \033[35m$kernel_version"
			if ! echo "$kernel_version" | grep -qF "$(uname -r)"; then
				_warn "Possible discrepancy between your running kernel '$(uname -r)' and the image '$kernel_version' we found ($opt_kernel), results might be incorrect"
			fi
		else
			_info "Kernel image is \033[35m$kernel_version"
		fi
	else
		_verbose "Kernel image version is unknown"
	fi
fi

_info

# end of header stuff

# now we define some util functions and the check_*() funcs, as
# the user can choose to execute only some of those

sys_interface_check()
{
	file="$1"
	regex="${2:-}"
	mode="${3:-}"
	msg=''
	fullmsg=''

	if [ "$opt_live" = 1 ] && [ "$opt_no_sysfs" = 0 ] && [ -r "$file" ]; then
		:
	else
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_SYSFS_$(basename "$file")_RET=1")
		return 1
	fi

	_mockvarname="SMC_MOCK_SYSFS_$(basename "$file")_RET"
	# shellcheck disable=SC2086,SC1083
	if [ -n "$(eval echo \${$_mockvarname:-})" ]; then
		_debug "sysfs: MOCKING enabled for $file func returns $(eval echo \$$_mockvarname)"
		mocked=1
		return "$(eval echo \$$_mockvarname)"
	fi

	[ -n "$regex" ] || regex='.*'
	_mockvarname="SMC_MOCK_SYSFS_$(basename "$file")"
	# shellcheck disable=SC2086,SC1083
	if [ -n "$(eval echo \${$_mockvarname:-})" ]; then
		fullmsg="$(eval echo \$$_mockvarname)"
		msg=$(echo "$fullmsg" | grep -Eo "$regex")
		_debug "sysfs: MOCKING enabled for $file, will return $fullmsg"
		mocked=1
	else
		fullmsg=$(cat "$file")
		msg=$(grep -Eo "$regex" "$file")
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_SYSFS_$(basename "$file")='$fullmsg'")
	fi
	if [ "$mode" = silent ]; then
		return 0
	elif [ "$mode" = quiet ]; then
		_info "* Information from the /sys interface: $fullmsg"
		return 0
	fi
	_info_nol "* Mitigated according to the /sys interface: "
	if echo "$msg" | grep -qi '^not affected'; then
		# Not affected
		status=OK
		pstatus green YES "$fullmsg"
	elif echo "$msg" | grep -qEi '^(kvm: )?mitigation'; then
		# Mitigation: PTI
		status=OK
		pstatus green YES "$fullmsg"
	elif echo "$msg" | grep -qi '^vulnerable'; then
		# Vulnerable
		status=VULN
		pstatus yellow NO "$fullmsg"
	else
		status=UNK
		pstatus yellow UNKNOWN "$fullmsg"
	fi
	_debug "sys_interface_check: $file=$msg (re=$regex)"
	return 0
}

check_cpu()
{
	_info "\033[1;34mHardware check\033[0m"

	if ! uname -m | grep -qwE 'x86_64|i[3-6]86|amd64'; then
		return
	fi

	_info     "* Hardware support (CPU microcode) for mitigation techniques"
	_info     "  * Indirect Branch Restricted Speculation (IBRS)"
	_info_nol "    * SPEC_CTRL MSR is available: "
	# the new MSR 'SPEC_CTRL' is at offset 0x48
	read_msr 0x48; ret=$?
	if [ $ret = $READ_MSR_RET_OK ]; then
		spec_ctrl_msr=1
		pstatus green YES
	elif [ $ret = $READ_MSR_RET_KO ]; then
		spec_ctrl_msr=0
		pstatus yellow NO
	else
		spec_ctrl_msr=-1
		pstatus yellow UNKNOWN "$read_msr_msg"
	fi

	_info_nol "    * CPU indicates IBRS capability: "
	# from kernel src: { X86_FEATURE_SPEC_CTRL,        CPUID_EDX,26, 0x00000007, 0 },
	# amd: https://developer.amd.com/wp-content/resources/Architecture_Guidelines_Update_Indirect_Branch_Control.pdf
	# amd: 8000_0008 EBX[14]=1
	cpuid_ibrs=''
	if is_intel; then
		read_cpuid 0x7 0x0 $EDX 26 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			pstatus green YES "SPEC_CTRL feature bit"
			cpuid_spec_ctrl=1
			cpuid_ibrs='SPEC_CTRL'
		fi
	elif is_amd || is_hygon; then
		read_cpuid 0x80000008 0x0 $EBX 14 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			pstatus green YES "IBRS_SUPPORT feature bit"
			cpuid_ibrs='IBRS_SUPPORT'
		fi
	else
		ret=invalid
		pstatus yellow NO "unknown CPU"
	fi
	if [ $ret = $READ_CPUID_RET_KO ]; then
		pstatus yellow NO
	elif [ $ret = $READ_CPUID_RET_ERR ]; then
		pstatus yellow UNKNOWN "$read_cpuid_msg"
		cpuid_spec_ctrl=-1
	fi

	if is_amd || is_hygon; then
		_info_nol "    * CPU indicates preferring IBRS always-on: "
		# amd or hygon
		read_cpuid 0x80000008 0x0 $EBX 16 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			pstatus green YES
		elif [ $ret = $READ_CPUID_RET_KO ]; then
			pstatus yellow NO
		else
			pstatus yellow UNKNOWN "$read_cpuid_msg"
		fi

		_info_nol "    * CPU indicates preferring IBRS over retpoline: "
		# amd or hygon
		read_cpuid 0x80000008 0x0 $EBX 18 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			pstatus green YES
		elif [ $ret = $READ_CPUID_RET_KO ]; then
			pstatus yellow NO
		else
			pstatus yellow UNKNOWN "$read_cpuid_msg"
		fi
	fi

	# IBPB
	_info     "  * Indirect Branch Prediction Barrier (IBPB)"

	if [ "$opt_allow_msr_write" = 1 ]; then
		_info_nol "    * PRED_CMD MSR is available: "
		# the new MSR 'PRED_CTRL' is at offset 0x49, write-only
		write_msr 0x49; ret=$?
		if [ $ret = $WRITE_MSR_RET_OK ]; then
			pstatus green YES
		elif [ $ret = $WRITE_MSR_RET_KO ]; then
			pstatus yellow NO
		else
			pstatus yellow UNKNOWN "$write_msr_msg"
		fi
	fi

	_info_nol "    * CPU indicates IBPB capability: "
	# CPUID EAX=0x80000008, ECX=0x00 return EBX[12] indicates support for just IBPB.
	if [ "$cpuid_spec_ctrl" = 1 ]; then
		# spec_ctrl implies ibpb
		cpuid_ibpb='SPEC_CTRL'
		pstatus green YES "SPEC_CTRL feature bit"
	elif is_intel; then
		if [ "$cpuid_spec_ctrl" = -1 ]; then
			pstatus yellow UNKNOWN "is cpuid kernel module available?"
		else
			pstatus yellow NO
		fi
	elif is_amd || is_hygon; then
		read_cpuid 0x80000008 0x0 $EBX 12 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			cpuid_ibpb='IBPB_SUPPORT'
			pstatus green YES "IBPB_SUPPORT feature bit"
		elif [ $ret = $READ_CPUID_RET_KO ]; then
			pstatus yellow NO
		else
			pstatus yellow UNKNOWN "$read_cpuid_msg"
		fi
	fi

	# STIBP
	_info     "  * Single Thread Indirect Branch Predictors (STIBP)"
	_info_nol "    * SPEC_CTRL MSR is available: "
	if [ "$spec_ctrl_msr" = 1 ]; then
		pstatus green YES
	elif [ "$spec_ctrl_msr" = 0 ]; then
		pstatus yellow NO
	else
		pstatus yellow UNKNOWN "is msr kernel module available?"
	fi

	_info_nol "    * CPU indicates STIBP capability: "
	# intel: A processor supports STIBP if it enumerates CPUID (EAX=7H,ECX=0):EDX[27] as 1
	# amd: 8000_0008 EBX[15]=1
	if is_intel; then
		read_cpuid 0x7 0x0 $EDX 27 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			pstatus green YES "Intel STIBP feature bit"
			#cpuid_stibp='Intel STIBP'
		fi
	elif is_amd; then
		read_cpuid 0x80000008 0x0 $EBX 15 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			pstatus green YES "AMD STIBP feature bit"
			#cpuid_stibp='AMD STIBP'
		fi
	elif is_hygon; then
		read_cpuid 0x80000008 0x0 $EBX 15 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			pstatus green YES "HYGON STIBP feature bit"
			#cpuid_stibp='HYGON STIBP'
		fi
	else
		ret=invalid
		pstatus yellow UNKNOWN "unknown CPU"
	fi
	if [ $ret = $READ_CPUID_RET_KO ]; then
		pstatus yellow NO
	elif [ $ret = $READ_CPUID_RET_ERR ]; then
		pstatus yellow UNKNOWN "$read_cpuid_msg"
	fi


	if is_amd || is_hygon; then
		_info_nol "    * CPU indicates preferring STIBP always-on: "
		read_cpuid 0x80000008 0x0 $EBX 17 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			pstatus green YES
		elif [ $ret = $READ_CPUID_RET_KO ]; then
			pstatus yellow NO
		else
			pstatus yellow UNKNOWN "$read_cpuid_msg"
		fi
	fi

	# variant 4
	if is_intel; then
		_info     "  * Speculative Store Bypass Disable (SSBD)"
		_info_nol "    * CPU indicates SSBD capability: "
		read_cpuid 0x7 0x0 $EDX 31 1 1; ret24=$?; ret25=$ret24
		if [ $ret24 = $READ_CPUID_RET_OK ]; then
			cpuid_ssbd='Intel SSBD'
		fi
	elif is_amd; then
		_info     "  * Speculative Store Bypass Disable (SSBD)"
		_info_nol "    * CPU indicates SSBD capability: "
		read_cpuid 0x80000008 0x0 $EBX 24 1 1; ret24=$?
		read_cpuid 0x80000008 0x0 $EBX 25 1 1; ret25=$?
		if [ $ret24 = $READ_CPUID_RET_OK ]; then
			cpuid_ssbd='AMD SSBD in SPEC_CTRL'
			#cpuid_ssbd_spec_ctrl=1
		elif [ $ret25 = $READ_CPUID_RET_OK ]; then
			cpuid_ssbd='AMD SSBD in VIRT_SPEC_CTRL'
			#cpuid_ssbd_virt_spec_ctrl=1
		elif [ "$cpu_family" -ge 21 ] && [ "$cpu_family" -le 23 ]; then
			cpuid_ssbd='AMD non-architectural MSR'
		fi
	elif is_hygon; then
		_info     "  * Speculative Store Bypass Disable (SSBD)"
		_info_nol "    * CPU indicates SSBD capability: "
		read_cpuid 0x80000008 0x0 $EBX 24 1 1; ret24=$?
		read_cpuid 0x80000008 0x0 $EBX 25 1 1; ret25=$?

		if [ $ret24 = $READ_CPUID_RET_OK ]; then
			cpuid_ssbd='HYGON SSBD in SPEC_CTRL'
			#hygon cpuid_ssbd_spec_ctrl=1
		elif [ $ret25 = $READ_CPUID_RET_OK ]; then
			cpuid_ssbd='HYGON SSBD in VIRT_SPEC_CTRL'
			#hygon cpuid_ssbd_virt_spec_ctrl=1
		elif [ "$cpu_family" -ge 24 ]; then
			cpuid_ssbd='HYGON non-architectural MSR'
		fi
	fi

	if [ -n "${cpuid_ssbd:=}" ]; then
		pstatus green YES "$cpuid_ssbd"
	elif [ "$ret24" = $READ_CPUID_RET_ERR ] && [ "$ret25" = $READ_CPUID_RET_ERR ]; then
		pstatus yellow UNKNOWN "$read_cpuid_msg"
	else
		pstatus yellow NO
	fi

	amd_ssb_no=0
	hygon_ssb_no=0
	if is_amd; then
		# similar to SSB_NO for intel
		read_cpuid 0x80000008 0x0 $EBX 26 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			amd_ssb_no=1
		elif [ $ret = $READ_CPUID_RET_ERR ]; then
			amd_ssb_no=-1
		fi
	elif is_hygon; then
		# indicate when speculative store bypass disable is no longer needed to prevent speculative loads bypassing older stores
		read_cpuid 0x80000008 0x0 $EBX 26 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			hygon_ssb_no=1
		elif [ $ret = $READ_CPUID_RET_ERR ]; then
			hygon_ssb_no=-1
		fi
	fi

	_info "  * L1 data cache invalidation"

	if [ "$opt_allow_msr_write" = 1 ]; then
		_info_nol "    * FLUSH_CMD MSR is available: "
		# the new MSR 'FLUSH_CMD' is at offset 0x10b, write-only
		write_msr 0x10b; ret=$?
		if [ $ret = $WRITE_MSR_RET_OK ]; then
			pstatus green YES
			cpu_flush_cmd=1
		elif [ $ret = $WRITE_MSR_RET_KO ]; then
			pstatus yellow NO
			cpu_flush_cmd=0
		else
			pstatus yellow UNKNOWN "$write_msr_msg"
			cpu_flush_cmd=-1
		fi
	fi

	# CPUID of L1D
	_info_nol "    * CPU indicates L1D flush capability: "
	read_cpuid 0x7 0x0 $EDX 28 1 1; ret=$?
	if [ $ret = $READ_CPUID_RET_OK ]; then
		pstatus green YES "L1D flush feature bit"
		cpuid_l1df=1
	elif [ $ret = $READ_CPUID_RET_KO ]; then
		pstatus yellow NO
		cpuid_l1df=0
	else
		pstatus yellow UNKNOWN "$read_cpuid_msg"
		cpuid_l1df=-1
	fi

	# if we weren't allowed to probe the write-only MSR but the CPUID
	# bit says that it shoul be there, make the assumption that it is
	if [ "$opt_allow_msr_write" != 1 ]; then
		cpu_flush_cmd=$cpuid_l1df
	fi

	if is_intel; then
		_info     "  * Microarchitectural Data Sampling"
		_info_nol "    * VERW instruction is available: "
		read_cpuid 0x7 0x0 $EDX 10 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			cpuid_md_clear=1
			pstatus green YES "MD_CLEAR feature bit"
		elif [ $ret = $READ_CPUID_RET_KO ]; then
			cpuid_md_clear=0
			pstatus yellow NO
		else
			cpuid_md_clear=-1
			pstatus yellow UNKNOWN "$read_cpuid_msg"
		fi
	fi

	if is_intel; then
		_info     "  * Indirect Branch Predictor Controls"
		_info_nol "    * Indirect Predictor Disable feature is available: "
		read_cpuid 0x7 0x2 $EDX 1 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			cpuid_ipred=1
			pstatus green YES "IPRED_CTRL feature bit"
		elif [ $ret = $READ_CPUID_RET_KO ]; then
			cpuid_ipred=0
			pstatus yellow NO
		else
			cpuid_ipred=-1
			pstatus yellow UNKNOWN "$read_cpuid_msg"
		fi

		_info_nol "    * Bottomless RSB Disable feature is available: "
		read_cpuid 0x7 0x2 $EDX 2 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			cpuid_rrsba=1
			pstatus green YES "RRSBA_CTRL feature bit"
		elif [ $ret = $READ_CPUID_RET_KO ]; then
			cpuid_rrsba=0
			pstatus yellow NO
		else
			cpuid_rrsba=-1
			pstatus yellow UNKNOWN "$read_cpuid_msg"
		fi

		_info_nol "    * BHB-Focused Indirect Predictor Disable feature is available: "
		read_cpuid 0x7 0x2 $EDX 2 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			cpuid_bhi=1
			pstatus green YES "BHI_CTRL feature bit"
		elif [ $ret = $READ_CPUID_RET_KO ]; then
			cpuid_bhi=0
			pstatus yellow NO
		else
			cpuid_bhi=-1
			pstatus yellow UNKNOWN "$read_cpuid_msg"
		fi

		# make shellcheck happy while we're not yet using these new cpuid values in our checks
		export cpuid_ipred cpuid_rrsba cpuid_bhi
	fi

	if is_intel; then
		_info     "  * Enhanced IBRS (IBRS_ALL)"
		_info_nol "    * CPU indicates ARCH_CAPABILITIES MSR availability: "
		cpuid_arch_capabilities=-1
		# A processor supports the ARCH_CAPABILITIES MSR if it enumerates CPUID (EAX=7H,ECX=0):EDX[29] as 1
		read_cpuid 0x7 0x0 $EDX 29 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			pstatus green YES
			cpuid_arch_capabilities=1
		elif [ $ret = $READ_CPUID_RET_KO ]; then
			pstatus yellow NO
			cpuid_arch_capabilities=0
		else
			pstatus yellow UNKNOWN "$read_cpuid_msg"
		fi

		_info_nol "    * ARCH_CAPABILITIES MSR advertises IBRS_ALL capability: "
		capabilities_taa_no=-1
		capabilities_mds_no=-1
		capabilities_rdcl_no=-1
		capabilities_ibrs_all=-1
		capabilities_rsba=-1
		capabilities_l1dflush_no=-1
		capabilities_ssb_no=-1
		capabilities_pschange_msc_no=-1
		capabilities_tsx_ctrl_msr=-1
		capabilities_gds_ctrl=-1
		capabilities_gds_no=-1
		if [ "$cpuid_arch_capabilities" = -1 ]; then
			pstatus yellow UNKNOWN
		elif [ "$cpuid_arch_capabilities" != 1 ]; then
			capabilities_rdcl_no=0
			capabilities_taa_no=0
			capabilities_mds_no=0
			capabilities_ibrs_all=0
			capabilities_rsba=0
			capabilities_l1dflush_no=0
			capabilities_ssb_no=0
			capabilities_pschange_msc_no=0
			capabilities_tsx_ctrl_msr=0
			capabilities_gds_ctrl=0
			capabilities_gds_no=0
			pstatus yellow NO
		else
			# the new MSR 'ARCH_CAPABILITIES' is at offset 0x10a
			read_msr 0x10a; ret=$?
			capabilities_rdcl_no=0
			capabilities_taa_no=0
			capabilities_mds_no=0
			capabilities_ibrs_all=0
			capabilities_rsba=0
			capabilities_l1dflush_no=0
			capabilities_ssb_no=0
			capabilities_pschange_msc_no=0
			capabilities_tsx_ctrl_msr=0
			capabilities_gds_ctrl=0
			capabilities_gds_no=0
			if [ $ret = $READ_MSR_RET_OK ]; then
				capabilities=$read_msr_value
				# https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/x86/include/asm/msr-index.h#n82
				_debug "capabilities MSR is $capabilities (decimal)"
				[ $(( capabilities >>  0 & 1 )) -eq 1 ] && capabilities_rdcl_no=1
				[ $(( capabilities >>  1 & 1 )) -eq 1 ] && capabilities_ibrs_all=1
				[ $(( capabilities >>  2 & 1 )) -eq 1 ] && capabilities_rsba=1
				[ $(( capabilities >>  3 & 1 )) -eq 1 ] && capabilities_l1dflush_no=1
				[ $(( capabilities >>  4 & 1 )) -eq 1 ] && capabilities_ssb_no=1
				[ $(( capabilities >>  5 & 1 )) -eq 1 ] && capabilities_mds_no=1
				[ $(( capabilities >>  6 & 1 )) -eq 1 ] && capabilities_pschange_msc_no=1
				[ $(( capabilities >>  7 & 1 )) -eq 1 ] && capabilities_tsx_ctrl_msr=1
				[ $(( capabilities >>  8 & 1 )) -eq 1 ] && capabilities_taa_no=1
				[ $(( capabilities >> 25 & 1 )) -eq 1 ] && capabilities_gds_ctrl=1
				[ $(( capabilities >> 26 & 1 )) -eq 1 ] && capabilities_gds_no=1
				_debug "capabilities says rdcl_no=$capabilities_rdcl_no ibrs_all=$capabilities_ibrs_all rsba=$capabilities_rsba l1dflush_no=$capabilities_l1dflush_no ssb_no=$capabilities_ssb_no mds_no=$capabilities_mds_no taa_no=$capabilities_taa_no pschange_msc_no=$capabilities_pschange_msc_no"
				if [ "$capabilities_ibrs_all" = 1 ]; then
					pstatus green YES
				else
					pstatus yellow NO
				fi
			elif [ $ret = $READ_MSR_RET_KO ]; then
				pstatus yellow NO
			else
				pstatus yellow UNKNOWN "$read_msr_msg"
			fi
		fi

		_info_nol "  * CPU explicitly indicates not being affected by Meltdown/L1TF (RDCL_NO): "
		if [ "$capabilities_rdcl_no" = -1 ]; then
			pstatus yellow UNKNOWN
		elif [ "$capabilities_rdcl_no" = 1 ]; then
			pstatus green YES
		else
			pstatus yellow NO
		fi

		_info_nol "  * CPU explicitly indicates not being affected by Variant 4 (SSB_NO): "
		if [ "$capabilities_ssb_no" = -1 ]; then
			pstatus yellow UNKNOWN
		elif [ "$capabilities_ssb_no" = 1 ] || [ "$amd_ssb_no" = 1 ] || [ "$hygon_ssb_no" = 1 ]; then
			pstatus green YES
		else
			pstatus yellow NO
		fi

		_info_nol "  * CPU/Hypervisor indicates L1D flushing is not necessary on this system: "
		if [ "$capabilities_l1dflush_no" = -1 ]; then
			pstatus yellow UNKNOWN
		elif [ "$capabilities_l1dflush_no" = 1 ]; then
			pstatus green YES
		else
			pstatus yellow NO
		fi

		_info_nol "  * Hypervisor indicates host CPU might be affected by RSB underflow (RSBA): "
		if [ "$capabilities_rsba" = -1 ]; then
			pstatus yellow UNKNOWN
		elif [ "$capabilities_rsba" = 1 ]; then
			pstatus yellow YES
		else
			pstatus blue NO
		fi

		_info_nol "  * CPU explicitly indicates not being affected by Microarchitectural Data Sampling (MDS_NO): "
		if [ "$capabilities_mds_no" = -1 ]; then
			pstatus yellow UNKNOWN
		elif [ "$capabilities_mds_no" = 1 ]; then
			pstatus green YES
		else
			pstatus yellow NO
		fi

		_info_nol "  * CPU explicitly indicates not being affected by TSX Asynchronous Abort (TAA_NO): "
		if [ "$capabilities_taa_no" = -1 ]; then
			pstatus yellow UNKNOWN
		elif [ "$capabilities_taa_no" = 1 ]; then
			pstatus green YES
		else
			pstatus yellow NO
		fi

		_info_nol "  * CPU explicitly indicates not being affected by iTLB Multihit (PSCHANGE_MSC_NO): "
		if [ "$capabilities_pschange_msc_no" = -1 ]; then
			pstatus yellow UNKNOWN
		elif [ "$capabilities_pschange_msc_no" = 1 ]; then
			pstatus green YES
		else
			pstatus yellow NO
		fi

		_info_nol "  * CPU explicitly indicates having MSR for TSX control (TSX_CTRL_MSR): "
		if [ "$capabilities_tsx_ctrl_msr" = -1 ]; then
			pstatus yellow UNKNOWN
		elif [ "$capabilities_tsx_ctrl_msr" = 1 ]; then
			pstatus green YES
		else
			pstatus yellow NO
		fi

		if [ "$capabilities_tsx_ctrl_msr" = 1 ]; then
			read_msr 0x122; ret=$?
			if [ "$ret" = $READ_MSR_RET_OK ]; then
				tsx_ctrl_msr=$read_msr_value
				tsx_ctrl_msr_rtm_disable=$(( tsx_ctrl_msr >> 0 & 1 ))
				tsx_ctrl_msr_cpuid_clear=$(( tsx_ctrl_msr >> 1 & 1 ))
			fi

			_info_nol "    * TSX_CTRL MSR indicates TSX RTM is disabled: "
			if [ "$tsx_ctrl_msr_rtm_disable" = 1 ]; then
				pstatus blue YES
			elif [ "$tsx_ctrl_msr_rtm_disable" = 0 ]; then
				pstatus blue NO
			else
				pstatus yellow UNKNOWN "couldn't read MSR"
			fi

			_info_nol "    * TSX_CTRL MSR indicates TSX CPUID bit is cleared: "
			if [ "$tsx_ctrl_msr_cpuid_clear" = 1 ]; then
				pstatus blue YES
			elif [ "$tsx_ctrl_msr_cpuid_clear" = 0 ]; then
				pstatus blue NO
			else
				pstatus yellow UNKNOWN "couldn't read MSR"
			fi
		fi

		_info_nol "  * CPU explicitly indicates being affected by GDS and having mitigation control (GDS_CTRL): "
		if [ "$capabilities_gds_ctrl" = -1 ]; then
			pstatus yellow UNKNOWN "couldn't read MSR"
		elif [ "$capabilities_gds_ctrl" = 1 ]; then
			pstatus green YES
		else
			pstatus blue NO
		fi

		mcu_opt_ctrl_gds_mitg_dis=-1
		mcu_opt_ctrl_gds_mitg_lock=-1
		if [ "$capabilities_gds_ctrl" = 1 ]; then
			# read the IA32_MCU_OPT_CTRL MSR
			read_msr 0x123; ret=$?
			if [ "$ret" = $READ_MSR_RET_OK ]; then
				mcu_opt_ctrl=$read_msr_value
				mcu_opt_ctrl_gds_mitg_dis=$((  mcu_opt_ctrl >> 4 & 1 ))
				mcu_opt_ctrl_gds_mitg_lock=$(( mcu_opt_ctrl >> 5 & 1 ))
			fi

			_info_nol "    * GDS microcode mitigation is disabled (GDS_MITG_DIS): "
			if [ "$mcu_opt_ctrl_gds_mitg_dis" = -1 ]; then
				pstatus yellow UNKNOWN "couldn't read MSR"
			elif [ "$mcu_opt_ctrl_gds_mitg_dis" = 1 ]; then
				pstatus yellow YES
			else
				pstatus green NO
			fi

			_info_nol "    * GDS microcode mitigation is locked in enabled state (GDS_MITG_LOCK): "
			if [ "$mcu_opt_ctrl_gds_mitg_lock" = -1 ]; then
				pstatus yellow UNKNOWN "couldn't read MSR"
			elif [ "$mcu_opt_ctrl_gds_mitg_lock" = 1 ]; then
				pstatus blue YES
			else
				pstatus blue NO
			fi
		fi

		_info_nol "  * CPU explicitly indicates not being affected by GDS (GDS_NO): "
		if [ "$capabilities_gds_no" = -1 ]; then
			pstatus yellow UNKNOWN "couldn't read MSR"
		elif [ "$capabilities_gds_no" = 1 ]; then
			pstatus green YES
		else
			pstatus yellow NO
		fi

	fi

	if is_amd || is_hygon; then
		_info "  * Selective Branch Predictor Barrier (SBPB)"
		_info_nol "    * PRED_CMD MSR supports SBPB bit write: "

		if [ "$opt_allow_msr_write" = 1 ]; then
			# the MSR PRED_SBPB is at offset 0x49, BIT(7), write-only
			write_msr 0x49 128; ret=$?
			if [ $ret = $WRITE_MSR_RET_OK ]; then
				pstatus green YES
				cpuid_sbpb=1
			elif [ $ret = $WRITE_MSR_RET_KO ]; then
				pstatus yellow NO
				cpuid_sbpb=2
			else
				pstatus yellow UNKNOWN "$write_msr_msg"
				cpuid_sbpb=3
			fi
		else
			pstatus yellow UNKNOWN "not allowed to write msr"
			cpuid_sbpb=3
		fi
	fi

	_info_nol "  * CPU supports Transactional Synchronization Extensions (TSX): "
	ret=$READ_CPUID_RET_KO
	cpuid_rtm=0
	if is_intel; then
		read_cpuid 0x7 0x0 $EBX 11 1 1; ret=$?
	fi
	if [ $ret = $READ_CPUID_RET_OK ]; then
		cpuid_rtm=1
		pstatus green YES "RTM feature bit"
	elif [ $ret = $READ_CPUID_RET_KO ]; then
		pstatus yellow NO
	else
		cpuid_rtm=-1
		pstatus yellow UNKNOWN "$read_cpuid_msg"
	fi

	_info_nol "  * CPU supports Software Guard Extensions (SGX): "
	ret=$READ_CPUID_RET_KO
	cpuid_sgx=0
	if is_intel; then
		read_cpuid 0x7 0x0 $EBX 2 1 1; ret=$?
	fi
	if [ $ret = $READ_CPUID_RET_OK ]; then
		pstatus blue YES
		cpuid_sgx=1
	elif [ $ret = $READ_CPUID_RET_KO ]; then
		pstatus green NO
	else
		cpuid_sgx=-1
		pstatus yellow UNKNOWN "$read_cpuid_msg"
	fi

	_info_nol "  * CPU supports Special Register Buffer Data Sampling (SRBDS): "
	# A processor supports SRBDS if it enumerates CPUID (EAX=7H,ECX=0):EDX[9] as 1
	# That means the mitigation disabling SRBDS exists
	ret=$READ_CPUID_RET_KO
	cpuid_srbds=0
	srbds_on=0
	if is_intel; then
		read_cpuid 0x7 0x0 $EDX 9 1 1; ret=$?
	fi
	if [ $ret = $READ_CPUID_RET_OK ]; then
		pstatus blue YES
		cpuid_srbds=1
		read_msr 0x123; ret=$?
		if [ $ret = $READ_MSR_RET_OK ]; then
			if [ $read_msr_value = 0 ]; then
				#SRBDS mitigation control exists and is enabled via microcode
				srbds_on=1
			else
				#SRBDS mitigation control exists but is disabled via microcode
				srbds_on=0
			fi
		else
			srbds_on=-1
		fi
	elif [ $ret = $READ_CPUID_RET_KO ]; then
		pstatus green NO
	else
		pstatus yellow UNKNOWN "$read_cpuid_msg"
		cpuid_srbds=0
	fi

	if is_amd; then
		_info_nol "  * CPU microcode is known to fix Zenbleed: "
		has_zenbleed_fixed_firmware; ret=$?
		if [ $ret -eq 0 ]; then
			# affected CPU, new fw
			pstatus green YES
		elif [ $ret -eq 1 ]; then
			# affected CPU, old fw
			pstatus red NO "required version: $zenbleed_fw_required"
		else
			# unaffected CPU
			pstatus yellow NO
		fi
	fi

	_info_nol "  * CPU microcode is known to cause stability problems: "
	if is_ucode_blacklisted; then
		pstatus red YES "$ucode_found"
		_warn
		_warn "The microcode your CPU is running on is known to cause instability problems,"
		_warn "such as intempestive reboots or random crashes."
		_warn "You are advised to either revert to a previous microcode version (that might not have"
		_warn "the mitigations for recent vulnerabilities), or upgrade to a newer one if available."
		_warn
	else
		pstatus blue NO "$ucode_found"
	fi

	_info_nol "  * CPU microcode is the latest known available version: "
	is_latest_known_ucode; ret=$?
	if [ $ret -eq 0 ]; then
		pstatus green YES "$ucode_latest"
	elif [ $ret -eq 1 ]; then
		pstatus red NO "$ucode_latest"
	else
		pstatus blue UNKNOWN "$ucode_latest"
	fi
}

check_cpu_vulnerabilities()
{
	_info     "* CPU vulnerability to the speculative execution attack variants"
	for cve in $supported_cve_list; do
		_info_nol "  * Affected by $cve ($(cve2name "$cve")): "
		if is_cpu_affected "$cve"; then
			pstatus yellow YES
		else
			pstatus green NO
		fi
	done
}

check_redhat_canonical_spectre()
{
	# if we were already called, don't do it again
	[ -n "${redhat_canonical_spectre:-}" ] && return

	if ! command -v "${opt_arch_prefix}strings" >/dev/null 2>&1; then
		redhat_canonical_spectre=-1
	elif [ -n "$kernel_err" ]; then
		redhat_canonical_spectre=-2
	else
		# Red Hat / Ubuntu specific variant1 patch is difficult to detect,
		# let's use the two same tricks than the official Red Hat detection script uses:
		if "${opt_arch_prefix}strings" "$kernel" | grep -qw noibrs && "${opt_arch_prefix}strings" "$kernel" | grep -qw noibpb; then
			# 1) detect their specific variant2 patch. If it's present, it means
			# that the variant1 patch is also present (both were merged at the same time)
			_debug "found redhat/canonical version of the variant2 patch (implies variant1)"
			redhat_canonical_spectre=1
		elif "${opt_arch_prefix}strings" "$kernel" | grep -q 'x86/pti:'; then
			# 2) detect their specific variant3 patch. If it's present, but the variant2
			# is not, it means that only variant1 is present in addition to variant3
			_debug "found redhat/canonical version of the variant3 patch (implies variant1 but not variant2)"
			redhat_canonical_spectre=2
		else
			redhat_canonical_spectre=0
		fi
	fi
}

check_has_vmm()
{
	_info_nol "* This system is a host running a hypervisor: "
	has_vmm=$opt_vmm
	if [ "$has_vmm" = -1 ] && [ "$opt_paranoid" = 1 ]; then
		# In paranoid mode, if --vmm was not specified on the command-line,
		# we want to be secure before everything else, so assume we're running
		# a hypervisor, as this requires more mitigations
		has_vmm=2
	elif [ "$has_vmm" = -1 ]; then
		# Here, we want to know if we are hosting a hypervisor, and running some VMs on it.
		# If we find no evidence that this is the case, assume we're not (to avoid scaring users),
		# this can always be overridden with --vmm in any case.
		has_vmm=0
		if command -v pgrep >/dev/null 2>&1; then
			# remove xenbus and xenwatch, also present inside domU
			# remove libvirtd as it can also be used to manage containers and not VMs
			# for each binary we want to grep, get the pids
			for _binary in qemu kvm xenstored xenconsoled
			do
				for _pid in $(pgrep -x $_binary)
				do
					# resolve the exe symlink, if it doesn't resolve with -m,
					# which doesn't even need the dest to exist, it means the symlink
					# is null, which is the case for kernel threads: ignore those to
					# avoid false positives (such as [kvm-irqfd-clean] under at least RHEL 7.6/7.7)
					if ! [ "$(readlink -m "/proc/$_pid/exe")" = "/proc/$_pid/exe" ]; then
						_debug "has_vmm: found PID $_pid"
						has_vmm=1
					fi
				done
			done
			unset _binary _pid
		else
			# ignore SC2009 as `ps ax` is actually used as a fallback if `pgrep` isn't installed
			# shellcheck disable=SC2009
			if command -v ps >/dev/null && ps ax | grep -vw grep | grep -q -e '\<qemu' -e '/qemu' -e '<\kvm' -e '/kvm' -e '/xenstored' -e '/xenconsoled'; then
				has_vmm=1
			fi
		fi
	fi
	if [ "$has_vmm" = 0 ]; then
		if [ "$opt_vmm" != -1 ]; then
			pstatus green NO "forced from command line"
		else
			pstatus green NO
		fi
	else
		if [ "$opt_vmm" != -1 ]; then
			pstatus blue YES "forced from command line"
		elif [ "$has_vmm" = 2 ]; then
			pstatus blue YES "paranoid mode"
		else
			pstatus blue YES
		fi
	fi
}

###################
# SPECTRE 1 SECTION

# bounds check bypass aka 'Spectre Variant 1'
check_CVE_2017_5753()
{
	cve='CVE-2017-5753'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_CVE_2017_5753_linux
	elif echo "$os" | grep -q BSD; then
		check_CVE_2017_5753_bsd
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_CVE_2017_5753_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/spectre_v1"; then
		# this kernel has the /sys interface, trust it over everything
		# v0.33+: don't. some kernels have backported the array_index_mask_nospec() workaround without
		# modifying the vulnerabilities/spectre_v1 file. that's bad. we can't trust it when it says Vulnerable :(
		# see "silent backport" detection at the bottom of this func
		sys_interface_available=1
	fi
	if [ "$opt_sysfs_only" != 1 ]; then
		# no /sys interface (or offline mode), fallback to our own ways
		_info_nol "* Kernel has array_index_mask_nospec: "
		# vanilla: look for the Linus' mask aka array_index_mask_nospec()
		# that is inlined at least in raw_copy_from_user (__get_user_X symbols)
		#mov PER_CPU_VAR(current_task), %_ASM_DX
		#cmp TASK_addr_limit(%_ASM_DX),%_ASM_AX
		#jae bad_get_user
		# /* array_index_mask_nospec() are the 2 opcodes that follow */
		#+sbb %_ASM_DX, %_ASM_DX
		#+and %_ASM_DX, %_ASM_AX
		#ASM_STAC
		# x86 64bits: jae(0x0f 0x83 0x?? 0x?? 0x?? 0x??) sbb(0x48 0x19 0xd2) and(0x48 0x21 0xd0)
		# x86 32bits: cmp(0x3b 0x82 0x?? 0x?? 0x00 0x00) jae(0x73 0x??) sbb(0x19 0xd2) and(0x21 0xd0)
		#
		# arm32
		##ifdef CONFIG_THUMB2_KERNEL
		##define CSDB	".inst.w 0xf3af8014"
		##else
		##define CSDB	".inst	0xe320f014"     e320f014
		##endif
		#asm volatile(
		#	"cmp	%1, %2\n"      e1500003
		#"	sbc	%0, %1, %1\n"  e0c03000
		#CSDB
		#: "=r" (mask)
		#: "r" (idx), "Ir" (sz)
		#: "cc");
		#
		# http://git.arm.linux.org.uk/cgit/linux-arm.git/commit/?h=spectre&id=a78d156587931a2c3b354534aa772febf6c9e855
		v1_mask_nospec=''
		if [ -n "$kernel_err" ]; then
			pstatus yellow UNKNOWN "couldn't check ($kernel_err)"
		elif ! command -v perl >/dev/null 2>&1; then
			pstatus yellow UNKNOWN "missing 'perl' binary, please install it"
		else
			perl -ne '/\x0f\x83....\x48\x19\xd2\x48\x21\xd0/ and $found++; END { exit($found) }' "$kernel"; ret=$?
			if [ $ret -gt 0 ]; then
				pstatus green YES "$ret occurrence(s) found of x86 64 bits array_index_mask_nospec()"
				v1_mask_nospec="x86 64 bits array_index_mask_nospec"
			else
				perl -ne '/\x3b\x82..\x00\x00\x73.\x19\xd2\x21\xd0/ and $found++; END { exit($found) }' "$kernel"; ret=$?
				if [ $ret -gt 0 ]; then
					pstatus green YES "$ret occurrence(s) found of x86 32 bits array_index_mask_nospec()"
					v1_mask_nospec="x86 32 bits array_index_mask_nospec"
				else
					ret=$("${opt_arch_prefix}objdump" $objdump_options "$kernel" | grep -w -e f3af8014 -e e320f014 -B2 | grep -B1 -w sbc | grep -w -c cmp)
					if [ "$ret" -gt 0 ]; then
						pstatus green YES "$ret occurrence(s) found of arm 32 bits array_index_mask_nospec()"
						v1_mask_nospec="arm 32 bits array_index_mask_nospec"
					else
						pstatus yellow NO
					fi
				fi
			fi
		fi

		_info_nol "* Kernel has the Red Hat/Ubuntu patch: "
		check_redhat_canonical_spectre
		if [ "$redhat_canonical_spectre" = -1 ]; then
			pstatus yellow UNKNOWN "missing '${opt_arch_prefix}strings' tool, please install it, usually it's in the binutils package"
		elif [ "$redhat_canonical_spectre" = -2 ]; then
			pstatus yellow UNKNOWN "couldn't check ($kernel_err)"
		elif [ "$redhat_canonical_spectre" = 1 ]; then
			pstatus green YES
		elif [ "$redhat_canonical_spectre" = 2 ]; then
			pstatus green YES "but without IBRS"
		else
			pstatus yellow NO
		fi

		_info_nol "* Kernel has mask_nospec64 (arm64): "
		#.macro	mask_nospec64, idx, limit, tmp
		#sub	\tmp, \idx, \limit
		#bic	\tmp, \tmp, \idx
		#and	\idx, \idx, \tmp, asr #63
		#csdb
		#.endm
		#$ aarch64-linux-gnu-objdump -d vmlinux | grep -w bic -A1 -B1 | grep -w sub -A2 | grep -w and -B2
		#ffffff8008082e44:       cb190353        sub     x19, x26, x25
		#ffffff8008082e48:       8a3a0273        bic     x19, x19, x26
		#ffffff8008082e4c:       8a93ff5a        and     x26, x26, x19, asr #63
		#ffffff8008082e50:       d503229f        hint    #0x14
		# /!\ can also just be "csdb" instead of "hint #0x14" for native objdump
		#
		# if we have v1_mask_nospec or redhat_canonical_spectre>0, don't bother disassembling the kernel, the answer is no.
		if [ -n "$v1_mask_nospec" ] || [ "$redhat_canonical_spectre" -gt 0 ]; then
			pstatus yellow NO
		elif [ -n "$kernel_err" ]; then
			pstatus yellow UNKNOWN "couldn't check ($kernel_err)"
		elif ! command -v perl >/dev/null 2>&1; then
			pstatus yellow UNKNOWN "missing 'perl' binary, please install it"
		elif ! command -v "${opt_arch_prefix}objdump" >/dev/null 2>&1; then
			pstatus yellow UNKNOWN "missing '${opt_arch_prefix}objdump' tool, please install it, usually it's in the binutils package"
		else
			"${opt_arch_prefix}objdump" $objdump_options "$kernel" | perl -ne 'push @r, $_; /\s(hint|csdb)\s/ && $r[0]=~/\ssub\s+(x\d+)/ && $r[1]=~/\sbic\s+$1,\s+$1,/ && $r[2]=~/\sand\s/ && exit(9); shift @r if @r>3'; ret=$?
			if [ "$ret" -eq 9 ]; then
				pstatus green YES "mask_nospec64 macro is present and used"
				v1_mask_nospec="arm64 mask_nospec64"
			else
				pstatus yellow NO
			fi
		fi

		_info_nol "* Kernel has array_index_nospec (arm64): "
		# in 4.19+ kernels, the mask_nospec64 asm64 macro is replaced by array_index_nospec, defined in nospec.h, and used in invoke_syscall()
		# ffffff8008090a4c:       2a0203e2        mov     w2, w2
		# ffffff8008090a50:       eb0200bf        cmp     x5, x2
		# ffffff8008090a54:       da1f03e2        ngc     x2, xzr
		# ffffff8008090a58:       d503229f        hint    #0x14
		# /!\ can also just be "csdb" instead of "hint #0x14" for native objdump
		#
		# if we have v1_mask_nospec or redhat_canonical_spectre>0, don't bother disassembling the kernel, the answer is no.
		if [ -n "$v1_mask_nospec" ] || [ "$redhat_canonical_spectre" -gt 0 ]; then
			pstatus yellow NO
		elif [ -n "$kernel_err" ]; then
			pstatus yellow UNKNOWN "couldn't check ($kernel_err)"
		elif ! command -v perl >/dev/null 2>&1; then
			pstatus yellow UNKNOWN "missing 'perl' binary, please install it"
		elif ! command -v "${opt_arch_prefix}objdump" >/dev/null 2>&1; then
			pstatus yellow UNKNOWN "missing '${opt_arch_prefix}objdump' tool, please install it, usually it's in the binutils package"
		else
			"${opt_arch_prefix}objdump" -d "$kernel" | perl -ne 'push @r, $_; /\s(hint|csdb)\s/ && $r[0]=~/\smov\s+(w\d+),\s+(w\d+)/ && $r[1]=~/\scmp\s+(x\d+),\s+(x\d+)/ && $r[2]=~/\sngc\s+$2,/ && exit(9); shift @r if @r>3'; ret=$?
			if [ "$ret" -eq 9 ]; then
				pstatus green YES "array_index_nospec macro is present and used"
				v1_mask_nospec="arm64 array_index_nospec"
			else
				pstatus yellow NO
			fi
		fi

		if [ "$opt_verbose" -ge 2 ] || { [ -z "$v1_mask_nospec" ] && [ "$redhat_canonical_spectre" != 1 ] && [ "$redhat_canonical_spectre" != 2 ]; }; then
			# this is a slow heuristic and we don't need it if we already know the kernel is patched
			# but still show it in verbose mode
			_info_nol "* Checking count of LFENCE instructions following a jump in kernel... "
			if [ -n "$kernel_err" ]; then
				pstatus yellow UNKNOWN "couldn't check ($kernel_err)"
			else
				if ! command -v "${opt_arch_prefix}objdump" >/dev/null 2>&1; then
					pstatus yellow UNKNOWN "missing '${opt_arch_prefix}objdump' tool, please install it, usually it's in the binutils package"
				else
					# here we disassemble the kernel and count the number of occurrences of the LFENCE opcode
					# in non-patched kernels, this has been empirically determined as being around 40-50
					# in patched kernels, this is more around 70-80, sometimes way higher (100+)
					# v0.13: 68 found in a 3.10.23-xxxx-std-ipv6-64 (with lots of modules compiled-in directly), which doesn't have the LFENCE patches,
					# so let's push the threshold to 70.
					# v0.33+: now only count lfence opcodes after a jump, way less error-prone
					# non patched kernel have between 0 and 20 matches, patched ones have at least 40-45
					nb_lfence=$("${opt_arch_prefix}objdump" $objdump_options "$kernel" 2>/dev/null | grep -w -B1 lfence | grep -Ewc 'jmp|jne|je')
					if [ "$nb_lfence" -lt 30 ]; then
						pstatus yellow NO "only $nb_lfence jump-then-lfence instructions found, should be >= 30 (heuristic)"
					else
						v1_lfence=1
						pstatus green YES "$nb_lfence jump-then-lfence instructions found, which is >= 30 (heuristic)"
					fi
				fi
			fi
		fi

	else
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi

	# report status
	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	elif [ -z "$msg" ]; then
		# if msg is empty, sysfs check didn't fill it, rely on our own test
		if [ -n "$v1_mask_nospec" ]; then
			pvulnstatus $cve OK "Kernel source has been patched to mitigate the vulnerability ($v1_mask_nospec)"
		elif [ "$redhat_canonical_spectre" = 1 ] || [ "$redhat_canonical_spectre" = 2 ]; then
			pvulnstatus $cve OK "Kernel source has been patched to mitigate the vulnerability (Red Hat/Ubuntu patch)"
		elif [ "$v1_lfence" = 1 ]; then
			pvulnstatus $cve OK "Kernel source has PROBABLY been patched to mitigate the vulnerability (jump-then-lfence instructions heuristic)"
		elif [ -n "$kernel_err" ]; then
			pvulnstatus $cve UNK "Couldn't find kernel image or tools missing to execute the checks"
			explain "Re-run this script with root privileges, after installing the missing tools indicated above"
		else
			pvulnstatus $cve VULN "Kernel source needs to be patched to mitigate the vulnerability"
			explain "Your kernel is too old to have the mitigation for Variant 1, you should upgrade to a newer kernel. If you're using a Linux distro and didn't compile the kernel yourself, you should upgrade your distro to get a newer kernel."
		fi
	else
		if [ "$msg" = "Vulnerable" ] && [ -n "$v1_mask_nospec" ]; then
			pvulnstatus $cve OK "Kernel source has been patched to mitigate the vulnerability (silent backport of array_index_mask_nospec)"
		else
			if [ "$msg" = "Vulnerable" ]; then
				msg="Kernel source needs to be patched to mitigate the vulnerability"
				_explain="Your kernel is too old to have the mitigation for Variant 1, you should upgrade to a newer kernel. If you're using a Linux distro and didn't compile the kernel yourself, you should upgrade your distro to get a newer kernel."
			fi
			pvulnstatus $cve "$status" "$msg"
			[ -n "${_explain:-}" ] && explain "$_explain"
			unset _explain
		fi
	fi
}

check_CVE_2017_5753_bsd()
{
	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	else
		pvulnstatus $cve VULN "no mitigation for BSD yet"
	fi
}

###################
# SPECTRE 2 SECTION

# branch target injection aka 'Spectre Variant 2'
check_CVE_2017_5715()
{
	cve='CVE-2017-5715'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_CVE_2017_5715_linux
	elif echo "$os" | grep -q BSD; then
		check_CVE_2017_5715_bsd
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_CVE_2017_5715_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/spectre_v2"; then
		# this kernel has the /sys interface, trust it over everything
		sys_interface_available=1
	fi
	if [ "$opt_sysfs_only" != 1 ]; then
		_info "* Mitigation 1"

		ibrs_can_tell=0
		ibrs_supported=''
		ibrs_enabled=''
		ibpb_can_tell=0
		ibpb_supported=''
		ibpb_enabled=''

		if [ "$opt_live" = 1 ]; then
			# in live mode, we can check for the ibrs_enabled file in debugfs
			# all versions of the patches have it (NOT the case of IBPB or KPTI)
			ibrs_can_tell=1
			mount_debugfs
			for dir in \
				/sys/kernel/debug \
				/sys/kernel/debug/x86 \
				"$procfs/sys/kernel"; do
				if [ -e "$dir/ibrs_enabled" ]; then
					# if the file is there, we have IBRS compiled-in
					# /sys/kernel/debug/ibrs_enabled: vanilla
					# /sys/kernel/debug/x86/ibrs_enabled: Red Hat (see https://access.redhat.com/articles/3311301)
					# /proc/sys/kernel/ibrs_enabled: OpenSUSE tumbleweed
					specex_knob_dir=$dir
					ibrs_supported="$dir/ibrs_enabled exists"
					ibrs_enabled=$(cat "$dir/ibrs_enabled" 2>/dev/null)
					_debug "ibrs: found $dir/ibrs_enabled=$ibrs_enabled"
					# if ibrs_enabled is there, ibpb_enabled will be in the same dir
					if [ -e "$dir/ibpb_enabled" ]; then
						# if the file is there, we have IBPB compiled-in (see note above for IBRS)
						ibpb_supported="$dir/ibpb_enabled exists"
						ibpb_enabled=$(cat "$dir/ibpb_enabled" 2>/dev/null)
						_debug "ibpb: found $dir/ibpb_enabled=$ibpb_enabled"
					else
						_debug "ibpb: $dir/ibpb_enabled file doesn't exist"
					fi
					break
				else
					_debug "ibrs: $dir/ibrs_enabled file doesn't exist"
				fi
			done
			# on some newer kernels, the spec_ctrl_ibrs flag in "$procfs/cpuinfo"
			# is set when ibrs has been administratively enabled (usually from cmdline)
			# which in that case means ibrs is supported *and* enabled for kernel & user
			# as per the ibrs patch series v3
			if [ -z "$ibrs_supported" ]; then
				if grep ^flags "$procfs/cpuinfo" | grep -qw spec_ctrl_ibrs; then
					_debug "ibrs: found spec_ctrl_ibrs flag in $procfs/cpuinfo"
					ibrs_supported="spec_ctrl_ibrs flag in $procfs/cpuinfo"
					# enabled=2 -> kernel & user
					ibrs_enabled=2
					# XXX and what about ibpb ?
				fi
			fi
			if [ -n "$fullmsg" ]; then
				# when IBPB is enabled on 4.15+, we can see it in sysfs
				if echo "$fullmsg" | grep -q 'IBPB'; then
					_debug "ibpb: found enabled in sysfs"
					[ -z "$ibpb_supported" ] && ibpb_supported='IBPB found enabled in sysfs'
					[ -z "$ibpb_enabled"   ] && ibpb_enabled=1
				fi
				# when IBRS_FW is enabled on 4.15+, we can see it in sysfs
				if echo "$fullmsg" | grep -q ', IBRS_FW'; then
					_debug "ibrs: found IBRS_FW in sysfs"
					[ -z "$ibrs_supported" ] && ibrs_supported='found IBRS_FW in sysfs'
					ibrs_fw_enabled=1
				fi
				# when IBRS is enabled on 4.15+, we can see it in sysfs
				# on a more recent kernel, classic "IBRS" is not even longer an option, because of the performance impact.
				# only "Enhanced IBRS" is available (on CPUs with the IBRS_ALL flag)
				if echo "$fullmsg" | grep -q -e '\<IBRS\>' -e 'Indirect Branch Restricted Speculation'; then
					_debug "ibrs: found IBRS in sysfs"
					[ -z "$ibrs_supported" ] && ibrs_supported='found IBRS in sysfs'
					[ -z "$ibrs_enabled"   ] && ibrs_enabled=3
				fi
				# checking for 'Enhanced IBRS' in sysfs, enabled on CPUs with IBRS_ALL
				if echo "$fullmsg" | grep -q -e 'Enhanced IBRS'; then
					[ -z "$ibrs_supported" ] && ibrs_supported='found Enhanced IBRS in sysfs'
					# 4 isn't actually a valid value of the now extinct "ibrs_enabled" flag file,
					# that only went from 0 to 3, so we use 4 as "enhanced ibrs is enabled"
					ibrs_enabled=4
				fi
			fi
			# in live mode, if ibrs or ibpb is supported and we didn't find these are enabled, then they are not
			[ -n "$ibrs_supported" ] && [ -z "$ibrs_enabled" ] && ibrs_enabled=0
			[ -n "$ibpb_supported" ] && [ -z "$ibpb_enabled" ] && ibpb_enabled=0
		fi
		if [ -z "$ibrs_supported" ]; then
			check_redhat_canonical_spectre
			if [ "$redhat_canonical_spectre" = 1 ]; then
				ibrs_supported="Red Hat/Ubuntu variant"
				ibpb_supported="Red Hat/Ubuntu variant"
			fi
		fi
		if [ -z "$ibrs_supported" ] && [ -n "$kernel" ]; then
			if ! command -v "${opt_arch_prefix}strings" >/dev/null 2>&1; then
				:
			else
				ibrs_can_tell=1
				ibrs_supported=$("${opt_arch_prefix}strings" "$kernel" | grep -Fw -e ', IBRS_FW' | head -1)
				if [ -n "$ibrs_supported" ]; then
					_debug "ibrs: found ibrs evidence in kernel image ($ibrs_supported)"
					ibrs_supported="found '$ibrs_supported' in kernel image"
				fi
			fi
		fi
		if [ -z "$ibrs_supported" ] && [ -n "$opt_map" ]; then
			ibrs_can_tell=1
			if grep -q spec_ctrl "$opt_map"; then
				ibrs_supported="found spec_ctrl in symbols file"
				_debug "ibrs: found '*spec_ctrl*' symbol in $opt_map"
			fi
		fi
		# recent (4.15) vanilla kernels have IBPB but not IBRS, and without the debugfs tunables of Red Hat
		# we can detect it directly in the image
		if [ -z "$ibpb_supported" ] && [ -n "$kernel" ]; then
			if ! command -v "${opt_arch_prefix}strings" >/dev/null 2>&1; then
				:
			else
				ibpb_can_tell=1
				ibpb_supported=$("${opt_arch_prefix}strings" "$kernel" | grep -Fw -e 'ibpb' -e ', IBPB' | head -1)
				if [ -n "$ibpb_supported" ]; then
					_debug "ibpb: found ibpb evidence in kernel image ($ibpb_supported)"
					ibpb_supported="found '$ibpb_supported' in kernel image"
				fi
			fi
		fi

		_info_nol "  * Kernel is compiled with IBRS support: "
		if [ -z "$ibrs_supported" ]; then
			if [ "$ibrs_can_tell" = 1 ]; then
				pstatus yellow NO
			else
				# problem obtaining/inspecting kernel or strings not installed, but if the later is true,
				# then readelf is not installed either (both in binutils) which makes the former true, so
				# either way kernel_err should be set
				pstatus yellow UNKNOWN "couldn't check ($kernel_err)"
			fi
		else
			if [ "$opt_verbose" -ge 2 ]; then
				pstatus green YES "$ibrs_supported"
			else
				pstatus green YES
			fi
		fi

		_info_nol "    * IBRS enabled and active: "
		if [ "$opt_live" = 1 ]; then
			if [ "$ibpb_enabled" = 2 ]; then
				# if ibpb=2, ibrs is forcefully=0
				pstatus blue NO "IBPB used instead of IBRS in all kernel entrypoints"
			else
				# 0 means disabled
				# 1 is enabled only for kernel space
				# 2 is enabled for kernel and user space
				# 3 is enabled
				# 4 is enhanced ibrs enabled
				case "$ibrs_enabled" in
					0)
						if [ "$ibrs_fw_enabled" = 1 ]; then
							pstatus blue YES "for firmware code only"
						else
							pstatus yellow NO
						fi
						;;
					1)	if [ "$ibrs_fw_enabled" = 1 ]; then pstatus green YES "for kernel space and firmware code"; else pstatus green YES "for kernel space"; fi;;
					2)	if [ "$ibrs_fw_enabled" = 1 ]; then pstatus green YES "for kernel, user space, and firmware code" ; else pstatus green YES "for both kernel and user space"; fi;;
					3)	if [ "$ibrs_fw_enabled" = 1 ]; then pstatus green YES "for kernel and firmware code"; else pstatus green YES; fi;;
					4)	pstatus green YES "Enhanced flavor, performance impact will be greatly reduced";;
					*)	if [ "$cpuid_ibrs" != 'SPEC_CTRL' ] && [ "$cpuid_ibrs" != 'IBRS_SUPPORT' ] && [ "$cpuid_spec_ctrl" != -1 ]; 
							then pstatus yellow NO; _debug "ibrs: known cpu not supporting SPEC-CTRL or IBRS"; 
						else 
							pstatus yellow UNKNOWN; fi;;
				esac
			fi
		else
			pstatus blue N/A "not testable in offline mode"
		fi

		_info_nol "  * Kernel is compiled with IBPB support: "
		if [ -z "$ibpb_supported" ]; then
			if [ "$ibpb_can_tell" = 1 ]; then
				pstatus yellow NO
			else
				# if we're in offline mode without System.map, we can't really know
				pstatus yellow UNKNOWN "in offline mode, we need the kernel image to be able to tell"
			fi
		else
			if [ "$opt_verbose" -ge 2 ]; then
				pstatus green YES "$ibpb_supported"
			else
				pstatus green YES
			fi
		fi

		_info_nol "    * IBPB enabled and active: "
		if [ "$opt_live" = 1 ]; then
			case "$ibpb_enabled" in
				"")
					if [ "$ibrs_supported" = 1 ]; then
						pstatus yellow UNKNOWN
					else
						pstatus yellow NO
					fi
					;;
				0)
					pstatus yellow NO
					;;
				1) pstatus green YES;;
				2) pstatus green YES "IBPB used instead of IBRS in all kernel entrypoints";;
				*) pstatus yellow UNKNOWN;;
			esac
		else
			pstatus blue N/A "not testable in offline mode"
		fi

		_info "* Mitigation 2"
		_info_nol "  * Kernel has branch predictor hardening (arm): "
		bp_harden_can_tell=0
		bp_harden=''
		if [ -r "$opt_config" ]; then
			bp_harden_can_tell=1
			bp_harden=$(grep -w 'CONFIG_HARDEN_BRANCH_PREDICTOR=y' "$opt_config")
			if [ -n "$bp_harden" ]; then
				pstatus green YES
				_debug "bp_harden: found '$bp_harden' in $opt_config"
			fi
		fi
		if [ -z "$bp_harden" ] && [ -n "$opt_map" ]; then
			bp_harden_can_tell=1
			bp_harden=$(grep -w bp_hardening_data "$opt_map")
			if [ -n "$bp_harden" ]; then
				pstatus green YES
				_debug "bp_harden: found '$bp_harden' in $opt_map"
			fi
		fi
		if [ -z "$bp_harden" ]; then
			if [ "$bp_harden_can_tell" = 1 ]; then
				pstatus yellow NO
			else
				pstatus yellow UNKNOWN
			fi
		fi

		_info_nol "  * Kernel compiled with retpoline option: "
		# We check the RETPOLINE kernel options
		retpoline=0
		if [ -r "$opt_config" ]; then
			if grep -q '^CONFIG_RETPOLINE=y' "$opt_config"; then
				pstatus green YES
				retpoline=1
				# shellcheck disable=SC2046
				_debug 'retpoline: found '$(grep '^CONFIG_RETPOLINE' "$opt_config")" in $opt_config"
			else
				pstatus yellow NO
			fi
		else
			pstatus yellow UNKNOWN "couldn't read your kernel configuration"
		fi

		if [ "$retpoline" = 1 ]; then
			# Now check if the compiler used to compile the kernel knows how to insert retpolines in generated asm
			# For gcc, this is -mindirect-branch=thunk-extern (detected by the kernel makefiles)
			# See gcc commit https://github.com/hjl-tools/gcc/commit/23b517d4a67c02d3ef80b6109218f2aadad7bd79
			# In latest retpoline LKML patches, the noretpoline_setup symbol exists only if CONFIG_RETPOLINE is set
			# *AND* if the compiler is retpoline-compliant, so look for that symbol
			#
			# if there is "retpoline" in the file and NOT "minimal", then it's full retpoline
			# (works for vanilla and Red Hat variants)
			#
			# since 5.15.28, this is now "Retpolines" as the implementation was switched to a generic one,
			# so we look for both "retpoline" and "retpolines"
			if [ "$opt_live" = 1 ] && [ -n "$fullmsg" ]; then
				if echo "$fullmsg" | grep -qwi -e retpoline -e retpolines; then
					if echo "$fullmsg" | grep -qwi minimal; then
						retpoline_compiler=0
						retpoline_compiler_reason="kernel reports minimal retpoline compilation"
					else
						retpoline_compiler=1
						retpoline_compiler_reason="kernel reports full retpoline compilation"
					fi
				fi
			elif [ -n "$opt_map" ]; then
				# look for the symbol
				if grep -qw noretpoline_setup "$opt_map"; then
					retpoline_compiler=1
					retpoline_compiler_reason="noretpoline_setup symbol found in System.map"
				fi
			elif [ -n "$kernel" ]; then
				# look for the symbol
				if command -v "${opt_arch_prefix}nm" >/dev/null 2>&1; then
					# the proper way: use nm and look for the symbol
					if "${opt_arch_prefix}nm" "$kernel" 2>/dev/null | grep -qw 'noretpoline_setup'; then
						retpoline_compiler=1
						retpoline_compiler_reason="noretpoline_setup found in kernel symbols"
					fi
				elif grep -q noretpoline_setup "$kernel"; then
					# if we don't have nm, nevermind, the symbol name is long enough to not have
					# any false positive using good old grep directly on the binary
					retpoline_compiler=1
					retpoline_compiler_reason="noretpoline_setup found in kernel"
				fi
			fi
			if [ -n "$retpoline_compiler" ]; then
				_info_nol "    * Kernel compiled with a retpoline-aware compiler: "
				if [ "$retpoline_compiler" = 1 ]; then
					if [ -n "$retpoline_compiler_reason" ]; then
						pstatus green YES "$retpoline_compiler_reason"
					else
						pstatus green YES
					fi
				else
					if [ -n "$retpoline_compiler_reason" ]; then
						pstatus red NO "$retpoline_compiler_reason"
					else
						pstatus red NO
					fi
				fi
			fi
		fi

		# only Red Hat has a tunable to disable it on runtime
		retp_enabled=-1
		if [ "$opt_live" = 1 ]; then
			if [ -e "$specex_knob_dir/retp_enabled" ]; then
				retp_enabled=$(cat "$specex_knob_dir/retp_enabled" 2>/dev/null)
				_debug "retpoline: found $specex_knob_dir/retp_enabled=$retp_enabled"
				_info_nol "    * Retpoline is enabled: "
				if [ "$retp_enabled" = 1 ]; then
					pstatus green YES
				else
					pstatus yellow NO
				fi
			fi
		fi

		# only for information, in verbose mode
		if [ "$opt_verbose" -ge 2 ]; then
			_info_nol "    * Local gcc is retpoline-aware: "
			if command -v gcc >/dev/null 2>&1; then
				if [ -n "$(gcc -mindirect-branch=thunk-extern --version 2>&1 >/dev/null)" ]; then
					pstatus blue NO
				else
					pstatus green YES
				fi
			else
				pstatus blue NO "gcc is not installed"
			fi
		fi

		if is_vulnerable_to_empty_rsb || [ "$opt_verbose" -ge 2 ]; then
			_info_nol "  * Kernel supports RSB filling: "
			rsb_filling=0
			if [ "$opt_live" = 1 ] && [ "$opt_no_sysfs" != 1 ]; then
				# if we're live and we aren't denied looking into /sys, let's do it
				if echo "$msg" | grep -qw RSB; then
					rsb_filling=1
					pstatus green YES
				fi
			fi
			if [ "$rsb_filling" = 0 ]; then
				if [ -n "$kernel_err" ]; then
					pstatus yellow UNKNOWN "couldn't check ($kernel_err)"
				else
					if grep -qw -e 'Filling RSB on context switch' "$kernel"; then
						rsb_filling=1
						pstatus green YES
					else
						rsb_filling=0
						pstatus yellow NO
					fi
				fi
			fi
		fi

	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	else
		if [ "$retpoline" = 1 ] && [ "$retpoline_compiler" = 1 ] && [ "$retp_enabled" != 0 ] && [ -n "$ibpb_enabled" ] && [ "$ibpb_enabled" -ge 1 ] && ( ! is_vulnerable_to_empty_rsb || [ "$rsb_filling" = 1 ] ); then
			pvulnstatus $cve OK "Full retpoline + IBPB are mitigating the vulnerability"
		elif [ "$retpoline" = 1 ] && [ "$retpoline_compiler" = 1 ] && [ "$retp_enabled" != 0 ] && [ "$opt_paranoid" = 0 ] && ( ! is_vulnerable_to_empty_rsb || [ "$rsb_filling" = 1 ] ); then
			pvulnstatus $cve OK "Full retpoline is mitigating the vulnerability"
			if [ -n "$cpuid_ibpb" ]; then
				_warn "You should enable IBPB to complete retpoline as a Variant 2 mitigation"
			else
				_warn "IBPB is considered as a good addition to retpoline for Variant 2 mitigation, but your CPU microcode doesn't support it"
			fi
		elif [ -n "$ibrs_enabled" ] && [ -n "$ibpb_enabled" ] && [ "$ibrs_enabled" -ge 1 ] && [ "$ibpb_enabled" -ge 1 ]; then
			if [ "$ibrs_enabled" = 4 ]; then
				pvulnstatus $cve OK "Enhanced IBRS + IBPB are mitigating the vulnerability"
			else
				pvulnstatus $cve OK "IBRS + IBPB are mitigating the vulnerability"
			fi
		elif [ "$ibpb_enabled" = 2 ] && ! is_cpu_smt_enabled; then
			pvulnstatus $cve OK "Full IBPB is mitigating the vulnerability"
		elif [ -n "$bp_harden" ]; then
			pvulnstatus $cve OK "Branch predictor hardening mitigates the vulnerability"
		elif [ -z "$bp_harden" ] && [ "$cpu_vendor" = ARM ]; then
			pvulnstatus $cve VULN "Branch predictor hardening is needed to mitigate the vulnerability"
			explain "Your kernel has not been compiled with the CONFIG_UNMAP_KERNEL_AT_EL0 option, recompile it with this option enabled."
		elif [ "$opt_live" != 1 ]; then
			if [ "$retpoline" = 1 ] && [ -n "$ibpb_supported" ]; then
				pvulnstatus $cve OK "offline mode: kernel supports retpoline + IBPB to mitigate the vulnerability"
			elif [ -n "$ibrs_supported" ] && [ -n "$ibpb_supported" ]; then
				pvulnstatus $cve OK "offline mode: kernel supports IBRS + IBPB to mitigate the vulnerability"
			elif [ "$ibrs_can_tell" != 1 ]; then
				pvulnstatus $cve UNK "offline mode: not enough information"
				explain "Re-run this script with root privileges, and give it the kernel image (--kernel), the kernel configuration (--config) and the System.map file (--map) corresponding to the kernel you would like to inspect."
			fi
		fi

		# if we arrive here and didn't already call pvulnstatus, then it's VULN, let's explain why
		if [ "$pvulnstatus_last_cve" != "$cve" ]; then
			# explain what's needed for this CPU
			if is_vulnerable_to_empty_rsb; then
				pvulnstatus $cve VULN "IBRS+IBPB or retpoline+IBPB+RSB filling, is needed to mitigate the vulnerability"
				explain "To mitigate this vulnerability, you need either IBRS + IBPB, both requiring hardware support from your CPU microcode in addition to kernel support, or a kernel compiled with retpoline and IBPB, with retpoline requiring a retpoline-aware compiler (re-run this script with -v to know if your version of gcc is retpoline-aware) and IBPB requiring hardware support from your CPU microcode. You also need a recent-enough kernel that supports RSB filling if you plan to use retpoline. For Skylake+ CPUs, the IBRS + IBPB approach is generally preferred as it guarantees complete protection, and the performance impact is not as high as with older CPUs in comparison with retpoline. More information about how to enable the missing bits for those two possible mitigations on your system follow. You only need to take one of the two approaches."
			elif is_zen_cpu || is_moksha_cpu; then
				pvulnstatus $cve VULN "retpoline+IBPB is needed to mitigate the vulnerability"
				explain "To mitigate this vulnerability, You need a kernel compiled with retpoline + IBPB support, with retpoline requiring a retpoline-aware compiler (re-run this script with -v to know if your version of gcc is retpoline-aware) and IBPB requiring hardware support from your CPU microcode."
			elif is_intel || is_amd || is_hygon; then
				pvulnstatus $cve VULN "IBRS+IBPB or retpoline+IBPB is needed to mitigate the vulnerability"
				explain "To mitigate this vulnerability, you need either IBRS + IBPB, both requiring hardware support from your CPU microcode in addition to kernel support, or a kernel compiled with retpoline and IBPB, with retpoline requiring a retpoline-aware compiler (re-run this script with -v to know if your version of gcc is retpoline-aware) and IBPB requiring hardware support from your CPU microcode. The retpoline + IBPB approach is generally preferred as the performance impact is lower. More information about how to enable the missing bits for those two possible mitigations on your system follow. You only need to take one of the two approaches."
			else
				# in that case, we might want to trust sysfs if it's there
				if [ -n "$msg" ]; then
					[ "$msg" = Vulnerable ] && msg="no known mitigation exists for your CPU vendor ($cpu_vendor)"
					pvulnstatus $cve $status "$msg"
				else
					pvulnstatus $cve VULN "no known mitigation exists for your CPU vendor ($cpu_vendor)"
				fi
			fi
		fi

		# if we are in live mode, we can check for a lot more stuff and explain further
		if [ "$opt_live" = 1 ] && [ "$vulnstatus" != "OK" ]; then
			_explain_hypervisor="An updated CPU microcode will have IBRS/IBPB capabilities indicated in the Hardware Check section above. If you're running under a hypervisor (KVM, Xen, VirtualBox, VMware, ...), the hypervisor needs to be up to date to be able to export the new host CPU flags to the guest. You can run this script on the host to check if the host CPU is IBRS/IBPB. If it is, and it doesn't show up in the guest, upgrade the hypervisor. You may need to reconfigure your VM to use a CPU model that has IBRS capability; in Libvirt, such CPUs are listed with an IBRS suffix."
			# IBPB (amd & intel)
			if { [ -z "$ibpb_enabled" ] || [ "$ibpb_enabled" = 0 ]; } && { is_intel || is_amd || is_hygon; }; then
				if [ -z "$cpuid_ibpb" ]; then
					explain "The microcode of your CPU needs to be upgraded to be able to use IBPB. This is usually done at boot time by your kernel (the upgrade is not persistent across reboots which is why it's done at each boot). If you're using a distro, make sure you are up to date, as microcode updates are usually shipped alongside with the distro kernel. Availability of a microcode update for you CPU model depends on your CPU vendor. You can usually find out online if a microcode update is available for your CPU by searching for your CPUID (indicated in the Hardware Check section). $_explain_hypervisor"
				fi
				if [ -z "$ibpb_supported" ]; then
					explain "Your kernel doesn't have IBPB support, so you need to either upgrade your kernel (if you're using a distro) or recompiling a more recent kernel."
				fi
				if [ -n "$cpuid_ibpb" ] && [ -n "$ibpb_supported" ]; then
					if [ -e "$specex_knob_dir/ibpb_enabled" ]; then
						# newer (April 2018) Red Hat kernels have ibpb_enabled as ro, and automatically enables it with retpoline
						if [ ! -w "$specex_knob_dir/ibpb_enabled" ] && [ -e "$specex_knob_dir/retp_enabled" ]; then
							explain "Both your CPU and your kernel have IBPB support, but it is currently disabled. You kernel should enable IBPB automatically if you enable retpoline. You may enable it with \`echo 1 > $specex_knob_dir/retp_enabled\`."
						else
							explain "Both your CPU and your kernel have IBPB support, but it is currently disabled. You may enable it with \`echo 1 > $specex_knob_dir/ibpb_enabled\`."
						fi
					else
						explain "Both your CPU and your kernel have IBPB support, but it is currently disabled. You may enable it. Check in your distro's documentation on how to do this."
					fi
				fi
			elif [ "$ibpb_enabled" = 2 ] && is_cpu_smt_enabled; then
				explain "You have ibpb_enabled set to 2, but it only offers sufficient protection when simultaneous multi-threading (aka SMT or HyperThreading) is disabled. You should reboot your system with the kernel parameter \`nosmt\`."
			fi
			# /IBPB

			# IBRS (amd & intel)
			if { [ -z "$ibrs_enabled" ] || [ "$ibrs_enabled" = 0 ]; } && { is_intel || is_amd || is_hygon; }; then
				if [ -z "$cpuid_ibrs" ]; then
					explain "The microcode of your CPU needs to be upgraded to be able to use IBRS. This is usually done at boot time by your kernel (the upgrade is not persistent across reboots which is why it's done at each boot). If you're using a distro, make sure you are up to date, as microcode updates are usually shipped alongside with the distro kernel. Availability of a microcode update for you CPU model depends on your CPU vendor. You can usually find out online if a microcode update is available for your CPU by searching for your CPUID (indicated in the Hardware Check section). $_explain_hypervisor"
				fi
				if [ -z "$ibrs_supported" ]; then
					explain "Your kernel doesn't have IBRS support, so you need to either upgrade your kernel (if you're using a distro) or recompiling a more recent kernel."
				fi
				if [ -n "$cpuid_ibrs" ] && [ -n "$ibrs_supported" ]; then
					if [ -e "$specex_knob_dir/ibrs_enabled" ]; then
						explain "Both your CPU and your kernel have IBRS support, but it is currently disabled. You may enable it with \`echo 1 > $specex_knob_dir/ibrs_enabled\`."
					else
						explain "Both your CPU and your kernel have IBRS support, but it is currently disabled. You may enable it. Check in your distro's documentation on how to do this."
					fi
				fi
			fi
			# /IBRS
			unset _explain_hypervisor

			# RETPOLINE (amd & intel &hygon )
			if is_amd || is_intel || is_hygon; then
				if [ "$retpoline" = 0 ]; then
					explain "Your kernel is not compiled with retpoline support, so you need to either upgrade your kernel (if you're using a distro) or recompile your kernel with the CONFIG_RETPOLINE option enabled. You also need to compile your kernel with a retpoline-aware compiler (re-run this script with -v to know if your version of gcc is retpoline-aware)."
				elif [ "$retpoline" = 1 ] && [ "$retpoline_compiler" = 0 ]; then
					explain "Your kernel is compiled with retpoline, but without a retpoline-aware compiler (re-run this script with -v to know if your version of gcc is retpoline-aware)."
				elif [ "$retpoline" = 1 ] && [ "$retpoline_compiler" = 1 ] && [ "$retp_enabled" = 0 ]; then
					explain "Your kernel has retpoline support and has been compiled with a retpoline-aware compiler, but retpoline is disabled. You should enable it with \`echo 1 > $specex_knob_dir/retp_enabled\`."
				fi
			fi
			# /RETPOLINE
		fi
	fi
	# sysfs msgs:
	#1 "Vulnerable"
	#2 "Vulnerable: Minimal generic ASM retpoline"
	#2 "Vulnerable: Minimal AMD ASM retpoline"
	# "Mitigation: Full generic retpoline"
	# "Mitigation: Full AMD retpoline"
	# $MITIGATION + ", IBPB"
	# $MITIGATION + ", IBRS_FW"
	#5 $MITIGATION + " - vulnerable module loaded"
	# Red Hat only:
	#2 "Vulnerable: Minimal ASM retpoline",
	#3 "Vulnerable: Retpoline without IBPB",
	#4 "Vulnerable: Retpoline on Skylake+",
	#5 "Vulnerable: Retpoline with unsafe module(s)",
	# "Mitigation: Full retpoline",
	# "Mitigation: Full retpoline and IBRS (user space)",
	# "Mitigation: IBRS (kernel)",
	# "Mitigation: IBRS (kernel and user space)",
	# "Mitigation: IBP disabled",
}

check_CVE_2017_5715_bsd()
{
	_info     "* Mitigation 1"
	_info_nol "  * Kernel supports IBRS: "
	ibrs_disabled=$(sysctl -n hw.ibrs_disable 2>/dev/null)
	if [ -z "$ibrs_disabled" ]; then
		pstatus yellow NO
	else
		pstatus green YES
	fi

	_info_nol "  * IBRS enabled and active: "
	ibrs_active=$(sysctl -n hw.ibrs_active 2>/dev/null)
	if [ "$ibrs_active" = 1 ]; then
		pstatus green YES
	else
		pstatus yellow NO
	fi

	_info     "* Mitigation 2"
	_info_nol "  * Kernel compiled with RETPOLINE: "
	retpoline=0
	if [ -n "$kernel_err" ]; then
		pstatus yellow UNKNOWN "couldn't check ($kernel_err)"
	else
		if ! command -v "${opt_arch_prefix}readelf" >/dev/null 2>&1; then
			pstatus yellow UNKNOWN "missing '${opt_arch_prefix}readelf' tool, please install it, usually it's in the binutils package"
		else
			nb_thunks=$("${opt_arch_prefix}readelf" -s "$kernel" | grep -c -e __llvm_retpoline_ -e __llvm_external_retpoline_ -e __x86_indirect_thunk_)
			if [ "$nb_thunks" -gt 0 ]; then
				retpoline=1
				pstatus green YES "found $nb_thunks thunk(s)"
			else
				pstatus yellow NO
			fi
		fi
	fi

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	elif [ "$retpoline" = 1 ]; then
		pvulnstatus $cve OK "Retpoline mitigates the vulnerability"
	elif [ "$ibrs_active" = 1 ]; then
		pvulnstatus $cve OK "IBRS mitigates the vulnerability"
	elif [ "$ibrs_disabled" = 0 ]; then
		pvulnstatus $cve VULN "IBRS is supported by your kernel but your CPU microcode lacks support"
		explain "The microcode of your CPU needs to be upgraded to be able to use IBRS. Availability of a microcode update for you CPU model depends on your CPU vendor. You can usually find out online if a microcode update is available for your CPU by searching for your CPUID (indicated in the Hardware Check section). To do a microcode update, you can search the ports for the \`cpupdate\` tool. Microcode updates done this way are not reboot-proof, so be sure to do it every time the system boots up."
	elif [ "$ibrs_disabled" = 1 ]; then
		pvulnstatus $cve VULN "IBRS is supported but administratively disabled on your system"
		explain "To enable IBRS, use \`sysctl hw.ibrs_disable=0\`"
	else
		pvulnstatus $cve VULN "IBRS is needed to mitigate the vulnerability but your kernel is missing support"
		explain "You need to either upgrade your kernel or recompile yourself a more recent version having IBRS support"
	fi
}

##################
# MELTDOWN SECTION

# no security impact but give a hint to the user in verbose mode
# about PCID/INVPCID cpuid features that must be present to avoid
# too big a performance impact with PTI
# refs:
# https://marc.info/?t=151532047900001&r=1&w=2
# https://groups.google.com/forum/m/#!topic/mechanical-sympathy/L9mHTbeQLNU
pti_performance_check()
{
	_info_nol "  * Reduced performance impact of PTI: "
	if [ -e "$procfs/cpuinfo" ] && grep ^flags "$procfs/cpuinfo" | grep -qw pcid; then
		cpu_pcid=1
	else
		read_cpuid 0x1 0x0 $ECX 17 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			cpu_pcid=1
		fi
	fi

	if [ -e "$procfs/cpuinfo" ] && grep ^flags "$procfs/cpuinfo" | grep -qw invpcid; then
		cpu_invpcid=1
	else
		read_cpuid 0x7 0x0 $EBX 10 1 1; ret=$?
		if [ $ret = $READ_CPUID_RET_OK ]; then
			cpu_invpcid=1
		fi
	fi

	if [ "$cpu_invpcid" = 1 ]; then
		pstatus green YES 'CPU supports INVPCID, performance impact of PTI will be greatly reduced'
	elif [ "$cpu_pcid" = 1 ]; then
		pstatus green YES 'CPU supports PCID, performance impact of PTI will be reduced'
	else
		pstatus blue NO 'PCID/INVPCID not supported, performance impact of PTI will be significant'
	fi
}

# rogue data cache load aka 'Meltdown' aka 'Variant 3'
check_CVE_2017_5754()
{
	cve='CVE-2017-5754'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_CVE_2017_5754_linux
	elif echo "$os" | grep -q BSD; then
		check_CVE_2017_5754_bsd
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_CVE_2017_5754_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/meltdown"; then
		# this kernel has the /sys interface, trust it over everything
		sys_interface_available=1
	fi
	if [ "$opt_sysfs_only" != 1 ]; then
		_info_nol "* Kernel supports Page Table Isolation (PTI): "
		kpti_support=''
		kpti_can_tell=0
		if [ -n "$opt_config" ]; then
			kpti_can_tell=1
			kpti_support=$(grep -w -e CONFIG_PAGE_TABLE_ISOLATION=y -e CONFIG_KAISER=y -e CONFIG_UNMAP_KERNEL_AT_EL0=y "$opt_config")
			if [ -n "$kpti_support" ]; then
				_debug "kpti_support: found option '$kpti_support' in $opt_config"
			fi
		fi
		if [ -z "$kpti_support" ] && [ -n "$opt_map" ]; then
			# it's not an elif: some backports don't have the PTI config but still include the patch
			# so we try to find an exported symbol that is part of the PTI patch in System.map
			# parse_kpti: arm
			kpti_can_tell=1
			kpti_support=$(grep -w -e kpti_force_enabled -e parse_kpti "$opt_map")
			if [ -n "$kpti_support" ]; then
				_debug "kpti_support: found '$kpti_support' in $opt_map"
			fi
		fi
		if [ -z "$kpti_support" ] && [ -n "$kernel" ]; then
			# same as above but in case we don't have System.map and only kernel, look for the
			# nopti option that is part of the patch (kernel command line option)
			# 'kpti=': arm
			kpti_can_tell=1
			if ! command -v "${opt_arch_prefix}strings" >/dev/null 2>&1; then
				pstatus yellow UNKNOWN "missing '${opt_arch_prefix}strings' tool, please install it, usually it's in the binutils package"
			else
				kpti_support=$("${opt_arch_prefix}strings" "$kernel" | grep -w -e nopti -e kpti=)
				if [ -n "$kpti_support" ]; then
					_debug "kpti_support: found '$kpti_support' in $kernel"
				fi
			fi
		fi

		if [ -n "$kpti_support" ]; then
			if [ "$opt_verbose" -ge 2 ]; then
				pstatus green YES "found '$kpti_support'"
			else
				pstatus green YES
			fi
		elif [ "$kpti_can_tell" = 1 ]; then
			pstatus yellow NO
		else
			pstatus yellow UNKNOWN "couldn't read your kernel configuration nor System.map file"
		fi

		mount_debugfs
		_info_nol "  * PTI enabled and active: "
		if [ "$opt_live" = 1 ]; then
			dmesg_grep="Kernel/User page tables isolation: enabled"
			dmesg_grep="$dmesg_grep|Kernel page table isolation enabled"
			dmesg_grep="$dmesg_grep|x86/pti: Unmapping kernel while in userspace"
			# aarch64
			dmesg_grep="$dmesg_grep|CPU features: detected( feature)?: Kernel page table isolation \(KPTI\)"
			if grep ^flags "$procfs/cpuinfo" | grep -qw pti; then
				# vanilla PTI patch sets the 'pti' flag in cpuinfo
				_debug "kpti_enabled: found 'pti' flag in $procfs/cpuinfo"
				kpti_enabled=1
			elif grep ^flags "$procfs/cpuinfo" | grep -qw kaiser; then
				# kernel line 4.9 sets the 'kaiser' flag in cpuinfo
				_debug "kpti_enabled: found 'kaiser' flag in $procfs/cpuinfo"
				kpti_enabled=1
			elif [ -e /sys/kernel/debug/x86/pti_enabled ]; then
				# Red Hat Backport creates a dedicated file, see https://access.redhat.com/articles/3311301
				kpti_enabled=$(cat /sys/kernel/debug/x86/pti_enabled 2>/dev/null)
				_debug "kpti_enabled: file /sys/kernel/debug/x86/pti_enabled exists and says: $kpti_enabled"
			elif is_xen_dom0; then
				pti_xen_pv_domU=$(xl dmesg | grep 'XPTI' | grep 'DomU enabled' | head -1)

				[ -n "$pti_xen_pv_domU" ] && kpti_enabled=1
			fi
			if [ -z "$kpti_enabled" ]; then
				dmesg_grep "$dmesg_grep"; ret=$?
				if [ $ret -eq 0 ]; then
					_debug "kpti_enabled: found hint in dmesg: $dmesg_grepped"
					kpti_enabled=1
				elif [ $ret -eq 2 ]; then
					_debug "kpti_enabled: dmesg truncated"
					kpti_enabled=-1
				fi
			fi
			if [ -z "$kpti_enabled" ]; then
				_debug "kpti_enabled: couldn't find any hint that PTI is enabled"
				kpti_enabled=0
			fi
			if [ "$kpti_enabled" = 1 ]; then
				pstatus green YES
			elif [ "$kpti_enabled" = -1 ]; then
				pstatus yellow UNKNOWN "dmesg truncated, please reboot and relaunch this script"
			else
				pstatus yellow NO
			fi
		else
			pstatus blue N/A "not testable in offline mode"
		fi

		pti_performance_check

	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi


	# Test if the current host is a Xen PV Dom0 / DomU
	xen_pv_domo=0
	xen_pv_domu=0
	is_xen_dom0 && xen_pv_domo=1
	is_xen_domU && xen_pv_domu=1

	if [ "$opt_live" = 1 ]; then
		# checking whether we're running under Xen PV 64 bits. If yes, we are affected by variant3
		# (unless we are a Dom0)
		_info_nol "* Running as a Xen PV DomU: "
		if [ "$xen_pv_domu" = 1 ]; then
			pstatus yellow YES
		else
			pstatus blue NO
		fi
	fi

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	elif [ -z "$msg" ]; then
		# if msg is empty, sysfs check didn't fill it, rely on our own test
		if [ "$opt_live" = 1 ]; then
			if [ "$kpti_enabled" = 1 ]; then
				pvulnstatus $cve OK "PTI mitigates the vulnerability"
			elif [ "$xen_pv_domo" = 1 ]; then
				pvulnstatus $cve OK "Xen Dom0s are safe and do not require PTI"
			elif [ "$xen_pv_domu" = 1 ]; then
				pvulnstatus $cve VULN "Xen PV DomUs are vulnerable and need to be run in HVM, PVHVM, PVH mode, or the Xen hypervisor must have the Xen's own PTI patch"
				explain "Go to https://blog.xenproject.org/2018/01/22/xen-project-spectre-meltdown-faq-jan-22-update/ for more information"
			elif [ "$kpti_enabled" = -1 ]; then
				pvulnstatus $cve UNK "couldn't find any clue of PTI activation due to a truncated dmesg, please reboot and relaunch this script"
			else
				pvulnstatus $cve VULN "PTI is needed to mitigate the vulnerability"
				if [ -n "$kpti_support" ]; then
					if [ -e "/sys/kernel/debug/x86/pti_enabled" ]; then
						explain "Your kernel supports PTI but it's disabled, you can enable it with \`echo 1 > /sys/kernel/debug/x86/pti_enabled\`"
					elif echo "$kernel_cmdline" | grep -q -w -e nopti -e pti=off; then
						explain "Your kernel supports PTI but it has been disabled on command-line, remove the nopti or pti=off option from your bootloader configuration"
					else
						explain "Your kernel supports PTI but it has been disabled, check \`dmesg\` right after boot to find clues why the system disabled it"
					fi
				else
					explain "If you're using a distro kernel, upgrade your distro to get the latest kernel available. Otherwise, recompile the kernel with the CONFIG_PAGE_TABLE_ISOLATION option (named CONFIG_KAISER for some kernels), or the CONFIG_UNMAP_KERNEL_AT_EL0 option (for ARM64)"
				fi
			fi
		else
			if [ -n "$kpti_support" ]; then
				pvulnstatus $cve OK "offline mode: PTI will mitigate the vulnerability if enabled at runtime"
			elif [ "$kpti_can_tell" = 1 ]; then
				pvulnstatus $cve VULN "PTI is needed to mitigate the vulnerability"
				explain "If you're using a distro kernel, upgrade your distro to get the latest kernel available. Otherwise, recompile the kernel with the CONFIG_PAGE_TABLE_ISOLATION option (named CONFIG_KAISER for some kernels), or the CONFIG_UNMAP_KERNEL_AT_EL0 option (for ARM64)"
			else
				pvulnstatus $cve UNK "offline mode: not enough information"
				explain "Re-run this script with root privileges, and give it the kernel image (--kernel), the kernel configuration (--config) and the System.map file (--map) corresponding to the kernel you would like to inspect."
			fi
		fi
	else
		if [ "$xen_pv_domo" = 1 ]; then
			msg="Xen Dom0s are safe and do not require PTI"
			status="OK"
		elif [ "$xen_pv_domu" = 1 ]; then
			msg="Xen PV DomUs are vulnerable and need to be run in HVM, PVHVM, PVH mode, or the Xen hypervisor must have the Xen's own PTI patch"
			status="VULN"
			_explain="Go to https://blog.xenproject.org/2018/01/22/xen-project-spectre-meltdown-faq-jan-22-update/ for more information"
		elif [ "$msg" = "Vulnerable" ]; then
			msg="PTI is needed to mitigate the vulnerability"
			_explain="If you're using a distro kernel, upgrade your distro to get the latest kernel available. Otherwise, recompile the kernel with the CONFIG_PAGE_TABLE_ISOLATION option (named CONFIG_KAISER for some kernels), or the CONFIG_UNMAP_KERNEL_AT_EL0 option (for ARM64)"
		fi
		pvulnstatus $cve "$status" "$msg"
		[ -z "${_explain:-}" ] && [ "$msg" = "Vulnerable" ] && _explain="If you're using a distro kernel, upgrade your distro to get the latest kernel available. Otherwise, recompile the kernel with the CONFIG_PAGE_TABLE_ISOLATION option (named CONFIG_KAISER for some kernels), or the CONFIG_UNMAP_KERNEL_AT_EL0 option (for ARM64)"
		[ -n "${_explain:-}" ] && explain "$_explain"
		unset _explain
	fi

	# Warn the user about XSA-254 recommended mitigations
	if [ "$xen_pv_domo" = 1 ]; then
		_warn
		_warn "This host is a Xen Dom0. Please make sure that you are running your DomUs"
		_warn "in HVM, PVHVM or PVH mode to prevent any guest-to-host / host-to-guest attacks."
		_warn
		_warn "See https://blog.xenproject.org/2018/01/22/xen-project-spectre-meltdown-faq-jan-22-update/ and XSA-254 for details."
	fi
}

check_CVE_2017_5754_bsd()
{
	_info_nol "* Kernel supports Page Table Isolation (PTI): "
	kpti_enabled=$(sysctl -n vm.pmap.pti 2>/dev/null)
	if [ -z "$kpti_enabled" ]; then
		pstatus yellow NO
	else
		pstatus green YES
	fi

	_info_nol "  * PTI enabled and active: "
	if [ "$kpti_enabled" = 1 ]; then
		pstatus green YES
	else
		pstatus yellow NO
	fi

	pti_performance_check

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	elif [ "$kpti_enabled" = 1 ]; then
		pvulnstatus $cve OK "PTI mitigates the vulnerability"
	elif [ -n "$kpti_enabled" ]; then
		pvulnstatus $cve VULN "PTI is supported but disabled on your system"
	else
		pvulnstatus $cve VULN "PTI is needed to mitigate the vulnerability"
	fi
}

####################
# VARIANT 3A SECTION

# rogue system register read aka 'Variant 3a'
check_CVE_2018_3640()
{
	cve='CVE-2018-3640'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"

	status=UNK
	sys_interface_available=0
	msg=''

	_info_nol "* CPU microcode mitigates the vulnerability: "
	if [ -n "$cpuid_ssbd" ]; then
		# microcodes that ship with SSBD are known to also fix variant3a
		# there is no specific cpuid bit as far as we know
		pstatus green YES
	else
		pstatus yellow NO
	fi

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	elif [ -n "$cpuid_ssbd" ]; then
		pvulnstatus $cve OK "your CPU microcode mitigates the vulnerability"
	else
		pvulnstatus $cve VULN "an up-to-date CPU microcode is needed to mitigate this vulnerability"
		explain "The microcode of your CPU needs to be upgraded to mitigate this vulnerability. This is usually done at boot time by your kernel (the upgrade is not persistent across reboots which is why it's done at each boot). If you're using a distro, make sure you are up to date, as microcode updates are usually shipped alongside with the distro kernel. Availability of a microcode update for you CPU model depends on your CPU vendor. You can usually find out online if a microcode update is available for your CPU by searching for your CPUID (indicated in the Hardware Check section). The microcode update is enough, there is no additional OS, kernel or software change needed."
	fi
}

###################
# VARIANT 4 SECTION

# speculative store bypass aka 'Variant 4'
check_CVE_2018_3639()
{
	cve='CVE-2018-3639'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_CVE_2018_3639_linux
	elif echo "$os" | grep -q BSD; then
		check_CVE_2018_3639_bsd
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_CVE_2018_3639_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/spec_store_bypass"; then
		# this kernel has the /sys interface, trust it over everything
		sys_interface_available=1
	fi
	if [ "$opt_sysfs_only" != 1 ]; then
		_info_nol "* Kernel supports disabling speculative store bypass (SSB): "
		if [ "$opt_live" = 1 ]; then
			if grep -Eq 'Speculation.?Store.?Bypass:' "$procfs/self/status" 2>/dev/null; then
				kernel_ssb="found in $procfs/self/status"
				_debug "found Speculation.Store.Bypass: in $procfs/self/status"
			fi
		fi
		# arm64 kernels can have cpu_show_spec_store_bypass with ARM64_SSBD, so exclude them
		if [ -z "$kernel_ssb" ] && [ -n "$kernel" ] && ! grep -q 'arm64_sys_' "$kernel"; then
			kernel_ssb=$("${opt_arch_prefix}strings" "$kernel" | grep spec_store_bypass | head -n1);
			[ -n "$kernel_ssb" ] && kernel_ssb="found $kernel_ssb in kernel"
		fi
		# arm64 kernels can have cpu_show_spec_store_bypass with ARM64_SSBD, so exclude them
		if [ -z "$kernel_ssb" ] && [ -n "$opt_map" ] && ! grep -q 'arm64_sys_' "$opt_map"; then
			kernel_ssb=$(grep spec_store_bypass "$opt_map" | awk '{print $3}' | head -n1)
			[ -n "$kernel_ssb" ] && kernel_ssb="found $kernel_ssb in System.map"
		fi
		# arm64 only:
		if [ -z "$kernel_ssb" ] && [ -n "$opt_map" ]; then
			kernel_ssb=$(grep -w cpu_enable_ssbs "$opt_map" | awk '{print $3}' | head -n1)
			[ -n "$kernel_ssb" ] && kernel_ssb="found $kernel_ssb in System.map"
		fi
		if [ -z "$kernel_ssb" ] && [ -n "$opt_config" ]; then
			kernel_ssb=$(grep -w 'CONFIG_ARM64_SSBD=y' "$opt_config")
			[ -n "$kernel_ssb" ] && kernel_ssb="CONFIG_ARM64_SSBD enabled in kconfig"
		fi
		if [ -z "$kernel_ssb" ] && [ -n "$kernel" ]; then
			# this string only appears in kernel if CONFIG_ARM64_SSBD is set
			kernel_ssb=$(grep -w "Speculative Store Bypassing Safe (SSBS)" "$kernel")
			[ -n "$kernel_ssb" ] && kernel_ssb="found 'Speculative Store Bypassing Safe (SSBS)' in kernel"
		fi
		# /arm64 only

		if [ -n "$kernel_ssb" ]; then
			pstatus green YES "$kernel_ssb"
		else
			pstatus yellow NO
		fi

		kernel_ssbd_enabled=-1
		if [ "$opt_live" = 1 ]; then
			# https://elixir.bootlin.com/linux/v5.0/source/fs/proc/array.c#L340
			_info_nol "* SSB mitigation is enabled and active: "
			if grep -Eq 'Speculation.?Store.?Bypass:[[:space:]]+thread' "$procfs/self/status" 2>/dev/null; then
				kernel_ssbd_enabled=1
				pstatus green YES "per-thread through prctl"
			elif grep -Eq 'Speculation.?Store.?Bypass:[[:space:]]+globally mitigated' "$procfs/self/status" 2>/dev/null; then
				kernel_ssbd_enabled=2
				pstatus green YES "global"
			elif grep -Eq 'Speculation.?Store.?Bypass:[[:space:]]+vulnerable' "$procfs/self/status" 2>/dev/null; then
				kernel_ssbd_enabled=0
				pstatus yellow NO
			elif grep -Eq 'Speculation.?Store.?Bypass:[[:space:]]+not vulnerable' "$procfs/self/status" 2>/dev/null; then
				kernel_ssbd_enabled=-2
				pstatus blue NO "not vulnerable"
			elif grep -Eq 'Speculation.?Store.?Bypass:[[:space:]]+unknown' "$procfs/self/status" 2>/dev/null; then
				kernel_ssbd_enabled=0
				pstatus blue NO
			else
				pstatus blue UNKNOWN "unknown value: $(grep -E 'Speculation.?Store.?Bypass:' "$procfs/self/status" 2>/dev/null | cut -d: -f2-)"
			fi

			if [ "$kernel_ssbd_enabled" = 1 ]; then
				_info_nol "* SSB mitigation currently active for selected processes: "
				# silence grep's stderr here to avoid ENOENT errors from processes that have exited since the shell's expansion of the *
				mitigated_processes=$(find /proc -mindepth 2 -maxdepth 2 -type f -name status -print0 2>/dev/null \
					| xargs -r0 grep -El 'Speculation.?Store.?Bypass:[[:space:]]+thread (force )?mitigated' 2>/dev/null \
					| sed s/status/exe/ | xargs -r -n1 readlink -f 2>/dev/null | xargs -r -n1 basename | sort -u | tr "\n" " " | sed 's/ $//')
				if [ -n "$mitigated_processes" ]; then
					pstatus green YES "$mitigated_processes"
				else
					pstatus yellow NO "no process found using SSB mitigation through prctl"
				fi
			fi
		fi

	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	elif [ -z "$msg" ] || [ "$msg" = "Vulnerable" ]; then
		# if msg is empty, sysfs check didn't fill it, rely on our own test
		if [ -n "$cpuid_ssbd" ]; then
			if [ -n "$kernel_ssb" ]; then
				if [ "$opt_live" = 1 ]; then
					if [ "$kernel_ssbd_enabled" -gt 0 ]; then
						pvulnstatus $cve OK "your CPU and kernel both support SSBD and mitigation is enabled"
					else
						pvulnstatus $cve VULN "your CPU and kernel both support SSBD but the mitigation is not active"
					fi
				else
					pvulnstatus $cve OK "your system provides the necessary tools for software mitigation"
				fi
			else
				pvulnstatus $cve VULN "your kernel needs to be updated"
				explain "You have a recent-enough CPU microcode but your kernel is too old to use the new features exported by your CPU's microcode. If you're using a distro kernel, upgrade your distro to get the latest kernel available. Otherwise, recompile the kernel from recent-enough sources."
			fi
		else
			if [ -n "$kernel_ssb" ]; then
				pvulnstatus $cve VULN "Your CPU doesn't support SSBD"
				explain "Your kernel is recent enough to use the CPU microcode features for mitigation, but your CPU microcode doesn't actually provide the necessary features for the kernel to use. The microcode of your CPU hence needs to be upgraded. This is usually done at boot time by your kernel (the upgrade is not persistent across reboots which is why it's done at each boot). If you're using a distro, make sure you are up to date, as microcode updates are usually shipped alongside with the distro kernel. Availability of a microcode update for you CPU model depends on your CPU vendor. You can usually find out online if a microcode update is available for your CPU by searching for your CPUID (indicated in the Hardware Check section)."
			else
				pvulnstatus $cve VULN "Neither your CPU nor your kernel support SSBD"
				explain "Both your CPU microcode and your kernel are lacking support for mitigation. If you're using a distro kernel, upgrade your distro to get the latest kernel available. Otherwise, recompile the kernel from recent-enough sources. The microcode of your CPU also needs to be upgraded. This is usually done at boot time by your kernel (the upgrade is not persistent across reboots which is why it's done at each boot). If you're using a distro, make sure you are up to date, as microcode updates are usually shipped alongside with the distro kernel. Availability of a microcode update for you CPU model depends on your CPU vendor. You can usually find out online if a microcode update is available for your CPU by searching for your CPUID (indicated in the Hardware Check section)."
			fi
		fi
	else
		pvulnstatus $cve "$status" "$msg"
	fi
}

check_CVE_2018_3639_bsd()
{
	_info_nol "* Kernel supports speculation store bypass: "
	if sysctl hw.spec_store_bypass_disable >/dev/null 2>&1; then
		kernel_ssb=1
		pstatus green YES
	else
		kernel_ssb=0
		pstatus yellow NO
	fi

	_info_nol "* Speculation store bypass is administratively enabled: "
	ssb_enabled=$(sysctl -n hw.spec_store_bypass_disable 2>/dev/null)
	_debug "hw.spec_store_bypass_disable=$ssb_enabled"
	case "$ssb_enabled" in
		0) pstatus yellow NO "disabled";;
		1) pstatus green YES "enabled";;
		2) pstatus green YES "auto mode";;
		*) pstatus yellow NO "unavailable";;
	esac

	_info_nol "* Speculation store bypass is currently active: "
	ssb_active=$(sysctl -n hw.spec_store_bypass_disable_active 2>/dev/null)
	_debug "hw.spec_store_bypass_disable_active=$ssb_active"
	case "$ssb_active" in
		1) pstatus green YES;;
		*) pstatus yellow NO;;
	esac

	if ! is_cpu_affected "$cve"; then
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	else
		if [ "$ssb_active" = 1 ]; then
				pvulnstatus $cve OK "SSBD mitigates the vulnerability"
		elif [ -n "$cpuid_ssbd" ]; then
			if [ "$kernel_ssb" = 1 ]; then
				pvulnstatus $cve VULN "you need to enable SSBD through sysctl to mitigate the vulnerability"
				explain "To enable SSBD right now, you can run \`sysctl hw.spec_store_bypass_disable=2'. To make this change persistent across reboots, you can add 'sysctl hw.spec_store_bypass_disable=2' to /etc/sysctl.conf."
			else
				pvulnstatus $cve VULN "your kernel needs to be updated"
			fi
		else
			if [ "$kernel_ssb" = 1 ]; then
				pvulnstatus $cve VULN "Your CPU doesn't support SSBD"
			else
				pvulnstatus $cve VULN "Neither your CPU nor your kernel support SSBD"
			fi
		fi
	fi
}

###########################
# L1TF / FORESHADOW SECTION

# L1 terminal fault (SGX) aka 'Foreshadow'
check_CVE_2018_3615()
{
	cve='CVE-2018-3615'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"

	_info_nol "* CPU microcode mitigates the vulnerability: "
	if { [ "$cpu_flush_cmd" = 1 ] || { [ "$msr_locked_down" = 1 ] && [ "$cpuid_l1df" = 1 ]; }; } && [ "$cpuid_sgx" = 1 ]; then
		# no easy way to detect a fixed SGX but we know that
		# microcodes that have the FLUSH_CMD MSR also have the
		# fixed SGX (for CPUs that support it), because Intel
		# delivered fixed microcodes for both issues at the same time
		#
		# if the system we're running on is locked down (no way to write MSRs),
		# make the assumption that if the L1D flush CPUID bit is set, probably
		# that FLUSH_CMD MSR is here too
		pstatus green YES
	elif [ "$cpuid_sgx" = 1 ]; then
		pstatus red NO
	else
		pstatus blue N/A
	fi

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	elif [ "$cpu_flush_cmd" = 1 ] || { [ "$msr_locked_down" = 1 ] && [ "$cpuid_l1df" = 1 ]; } ; then
		pvulnstatus $cve OK "your CPU microcode mitigates the vulnerability"
	else
		pvulnstatus $cve VULN "your CPU supports SGX and the microcode is not up to date"
	fi
}

# L1 terminal fault (OS) aka 'Foreshadow-NG (OS)'
check_CVE_2018_3620()
{
	cve='CVE-2018-3620'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_CVE_2018_3620_linux
	elif echo "$os" | grep -q BSD; then
		check_CVE_2018_3620_bsd
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_CVE_2018_3620_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/l1tf"; then
		# this kernel has the /sys interface, trust it over everything
		sys_interface_available=1
	fi
	if [ "$opt_sysfs_only" != 1 ]; then
		_info_nol "* Kernel supports PTE inversion: "
		if ! command -v "${opt_arch_prefix}strings" >/dev/null 2>&1; then
			pstatus yellow UNKNOWN "missing 'strings' tool, please install it"
			pteinv_supported=-1
		elif [ -n "$kernel_err" ]; then
			pstatus yellow UNKNOWN "$kernel_err"
			pteinv_supported=-1
		else
			if "${opt_arch_prefix}strings" "$kernel" | grep -Fq 'PTE Inversion'; then
				pstatus green YES "found in kernel image"
				_debug "pteinv: found pte inversion evidence in kernel image"
				pteinv_supported=1
			else
				pstatus yellow NO
				pteinv_supported=0
			fi
		fi

		_info_nol "* PTE inversion enabled and active: "
		if [ "$opt_live" = 1 ]; then
			if [ -n "$fullmsg" ]; then
				if echo "$fullmsg" | grep -q 'Mitigation: PTE Inversion'; then
					pstatus green YES
					pteinv_active=1
				else
					pstatus yellow NO
					pteinv_active=0
				fi
			else
				pstatus yellow UNKNOWN "sysfs interface not available"
				pteinv_active=-1
			fi
		else
			pstatus blue N/A "not testable in offline mode"
		fi
	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	elif [ -z "$msg" ]; then
		# if msg is empty, sysfs check didn't fill it, rely on our own test
		if [ "$pteinv_supported" = 1 ]; then
			if [ "$pteinv_active" = 1 ] || [ "$opt_live" != 1 ]; then
				pvulnstatus $cve OK "PTE inversion mitigates the vulnerability"
			else
				pvulnstatus $cve VULN "Your kernel supports PTE inversion but it doesn't seem to be enabled"
			fi
		else
			pvulnstatus $cve VULN "Your kernel doesn't support PTE inversion, update it"
		fi
	else
		pvulnstatus $cve "$status" "$msg"
	fi
}

check_CVE_2018_3620_bsd()
{
	_info_nol "* Kernel reserved the memory page at physical address 0x0: "
	if ! kldstat -q -m vmm; then
		kldload vmm 2>/dev/null && kldload_vmm=1
		_debug "attempted to load module vmm, kldload_vmm=$kldload_vmm"
	else
		_debug "vmm module already loaded"
	fi
	if sysctl hw.vmm.vmx.l1d_flush >/dev/null 2>&1; then
		# https://security.FreeBSD.org/patches/SA-18:09/l1tf-11.2.patch
		# this is very difficult to detect that the kernel reserved the 0 page, but this fix
		# is part of the exact same patch than the other L1TF CVE, so we detect it
		# and deem it as OK if the other patch is there
		pstatus green YES
		bsd_zero_reserved=1
	else
		pstatus yellow NO
		bsd_zero_reserved=0
	fi

	if ! is_cpu_affected "$cve"; then
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	else
		if [ "$bsd_zero_reserved" = 1 ]; then
			pvulnstatus $cve OK "kernel mitigates the vulnerability"
		else
			pvulnstatus $cve VULN "your kernel needs to be updated"
		fi
	fi
}

# L1TF VMM
check_CVE_2018_3646()
{
	cve='CVE-2018-3646'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_CVE_2018_3646_linux
	elif echo "$os" | grep -q BSD; then
		check_CVE_2018_3646_bsd
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_CVE_2018_3646_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/l1tf" '.*' quiet; then
		# this kernel has the /sys interface, trust it over everything
		sys_interface_available=1
	fi
	l1d_mode=-1
	if [ "$opt_sysfs_only" != 1 ]; then
		check_has_vmm

		_info "* Mitigation 1 (KVM)"
		_info_nol "  * EPT is disabled: "
		ept_disabled=-1
		if [ "$opt_live" = 1 ]; then
			if ! [ -r /sys/module/kvm_intel/parameters/ept ]; then
				pstatus blue N/A "the kvm_intel module is not loaded"
			elif [ "$(cat /sys/module/kvm_intel/parameters/ept)" = N ]; then
				pstatus green YES
				ept_disabled=1
			else
				pstatus yellow NO
			fi
		else
			pstatus blue N/A "not testable in offline mode"
		fi

		_info "* Mitigation 2"
		_info_nol "  * L1D flush is supported by kernel: "
		if [ "$opt_live" = 1 ] && grep -qw flush_l1d "$procfs/cpuinfo"; then
			l1d_kernel="found flush_l1d in $procfs/cpuinfo"
		fi
		if [ -z "$l1d_kernel" ]; then
			if ! command -v "${opt_arch_prefix}strings" >/dev/null 2>&1; then
				l1d_kernel_err="missing '${opt_arch_prefix}strings' tool, please install it, usually it's in the binutils package"
			elif [ -n "$kernel_err" ]; then
				l1d_kernel_err="$kernel_err"
			elif "${opt_arch_prefix}strings" "$kernel" | grep -qw flush_l1d; then
				l1d_kernel='found flush_l1d in kernel image'
			fi
		fi

		if [ -n "$l1d_kernel" ]; then
			pstatus green YES "$l1d_kernel"
		elif [ -n "$l1d_kernel_err" ]; then
			pstatus yellow UNKNOWN "$l1d_kernel_err"
		else
			pstatus yellow NO
		fi

		_info_nol "  * L1D flush enabled: "
		if [ "$opt_live" = 1 ]; then
			if [ -n "$fullmsg" ]; then
				# vanilla: VMX: $l1dstatus, SMT $smtstatus
				# Red Hat: VMX: SMT $smtstatus, L1D $l1dstatus
				# $l1dstatus is one of (auto|vulnerable|conditional cache flushes|cache flushes|EPT disabled|flush not necessary)
				# $smtstatus is one of (vulnerable|disabled)
				# can also just be "Not affected"
				if echo "$fullmsg" | grep -Eq -e 'Not affected' -e '(VMX:|L1D) (EPT disabled|vulnerable|flush not necessary)'; then
					l1d_mode=0
					pstatus yellow NO
				elif echo "$fullmsg" | grep -Eq '(VMX:|L1D) conditional cache flushes'; then
					l1d_mode=1
					pstatus green YES "conditional flushes"
				elif echo "$fullmsg" | grep -Eq '(VMX:|L1D) cache flushes'; then
					l1d_mode=2
					pstatus green YES "unconditional flushes"
				else
					if is_xen_dom0; then
						l1d_xen_hardware=$(xl dmesg | grep 'Hardware features:' | grep 'L1D_FLUSH' | head -1)
						l1d_xen_hypervisor=$(xl dmesg | grep 'Xen settings:' | grep 'L1D_FLUSH' | head -1)
						l1d_xen_pv_domU=$(xl dmesg | grep 'PV L1TF shadowing:' | grep 'DomU enabled' | head -1)

						if [ -n "$l1d_xen_hardware" ] && [ -n "$l1d_xen_hypervisor" ] && [ -n "$l1d_xen_pv_domU" ]; then
							l1d_mode=5
							pstatus green YES "for XEN guests"
						elif [ -n "$l1d_xen_hardware" ] && [ -n "$l1d_xen_hypervisor" ]; then
							l1d_mode=4
							pstatus yellow YES "for XEN guests (HVM only)"
						elif [ -n "$l1d_xen_pv_domU" ]; then
							l1d_mode=3
							pstatus yellow YES "for XEN guests (PV only)"
						else
							l1d_mode=0
							pstatus yellow NO "for XEN guests"
						fi
					else
						l1d_mode=-1
						pstatus yellow UNKNOWN "unrecognized mode"
					fi
				fi
			else
				l1d_mode=-1
				pstatus yellow UNKNOWN "can't find or read /sys/devices/system/cpu/vulnerabilities/l1tf"
			fi
		else
			l1d_mode=-1
			pstatus blue N/A "not testable in offline mode"
		fi

		_info_nol "  * Hardware-backed L1D flush supported: "
		if [ "$opt_live" = 1 ]; then
			if grep -qw flush_l1d "$procfs/cpuinfo" || [ -n "$l1d_xen_hardware" ]; then
				pstatus green YES "performance impact of the mitigation will be greatly reduced"
			else
				pstatus blue NO "flush will be done in software, this is slower"
			fi
		else
			pstatus blue N/A "not testable in offline mode"
		fi

		_info_nol "  * Hyper-Threading (SMT) is enabled: "
		is_cpu_smt_enabled; smt_enabled=$?
		if [ "$smt_enabled" = 0 ]; then
			pstatus yellow YES
		elif [ "$smt_enabled" = 1 ]; then
			pstatus green NO
		else
			pstatus yellow UNKNOWN
		fi

	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
		l1d_mode=-1
	fi

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	elif [ "$fullmsg" = "Not affected" ]; then
		# just in case a very recent kernel knows better than we do
		pvulnstatus $cve OK "your kernel reported your CPU model as not affected"
	elif [ "$has_vmm" = 0 ]; then
		pvulnstatus $cve OK "this system is not running a hypervisor"
	else
		if [ "$ept_disabled" = 1 ]; then
			pvulnstatus $cve OK "EPT is disabled which mitigates the vulnerability"
		elif [ "$opt_paranoid" = 0 ]; then
			if [ "$l1d_mode" -ge 1 ]; then
				pvulnstatus $cve OK "L1D flushing is enabled and mitigates the vulnerability"
			else
				pvulnstatus $cve VULN "disable EPT or enable L1D flushing to mitigate the vulnerability"
			fi
		else
			if [ "$l1d_mode" -ge 2 ]; then
				if [ "$smt_enabled" = 1 ]; then
					pvulnstatus $cve OK "L1D unconditional flushing and Hyper-Threading disabled are mitigating the vulnerability"
				else
					pvulnstatus $cve VULN "Hyper-Threading must be disabled to fully mitigate the vulnerability"
				fi
			else
				if [ "$smt_enabled" = 1 ]; then
					pvulnstatus $cve VULN "L1D unconditional flushing should be enabled to fully mitigate the vulnerability"
				else
					pvulnstatus $cve VULN "enable L1D unconditional flushing and disable Hyper-Threading to fully mitigate the vulnerability"
				fi
			fi
		fi

		if [ $l1d_mode -gt 3 ]; then
			_warn
			_warn "This host is a Xen Dom0. Please make sure that you are running your DomUs"
			_warn "with a kernel which contains CVE-2018-3646 mitigations."
			_warn
			_warn "See https://www.suse.com/support/kb/doc/?id=7023078 and XSA-273 for details."
		fi
	fi
}

check_CVE_2018_3646_bsd()
{
	_info_nol "* Kernel supports L1D flushing: "
	if sysctl hw.vmm.vmx.l1d_flush >/dev/null 2>&1; then
		pstatus green YES
		kernel_l1d_supported=1
	else
		pstatus yellow NO
		kernel_l1d_supported=0
	fi

	_info_nol "* L1D flushing is enabled: "
	kernel_l1d_enabled=$(sysctl -n hw.vmm.vmx.l1d_flush 2>/dev/null)
	case "$kernel_l1d_enabled" in
		0) pstatus yellow NO;;
		1) pstatus green YES;;
		"") pstatus yellow NO;;
		*) pstatus yellow UNKNOWN;;
	esac

	if ! is_cpu_affected "$cve"; then
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	else
		if [ "$kernel_l1d_enabled" = 1 ]; then
			pvulnstatus $cve OK "L1D flushing mitigates the vulnerability"
		elif [ "$kernel_l1d_supported" = 1 ]; then
			pvulnstatus $cve VULN "L1D flushing is supported by your kernel but is disabled"
		else
			pvulnstatus $cve VULN "your kernel needs to be updated"
		fi
	fi
}

###################
# MSBDS SECTION

# Microarchitectural Store Buffer Data Sampling
check_CVE_2018_12126()
{
	cve='CVE-2018-12126'
	check_mds $cve
}

###################
# MFBDS SECTION

# Microarchitectural Fill Buffer Data Sampling
check_CVE_2018_12130()
{
	cve='CVE-2018-12130'
	check_mds $cve
}

###################
# MLPDS SECTION

# Microarchitectural Load Port Data Sampling
check_CVE_2018_12127()
{
	cve='CVE-2018-12127'
	check_mds $cve
}

###################
# MDSUM SECTION

# Microarchitectural Data Sampling Uncacheable Memory 
check_CVE_2019_11091()
{
	cve='CVE-2019-11091'
	check_mds $cve
}

# Microarchitectural Data Sampling
check_mds()
{
	cve=$1
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_mds_linux "$cve"
	elif echo "$os" | grep -q BSD; then
		check_mds_bsd "$cve"
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_mds_bsd()
{
	_info_nol "* Kernel supports using MD_CLEAR mitigation: "
	if [ "$opt_live" = 1 ]; then
		if sysctl hw.mds_disable >/dev/null 2>&1; then
			pstatus green YES
			kernel_md_clear=1
		else
			pstatus yellow NO
			kernel_md_clear=0
		fi
	else
		if grep -Fq hw.mds_disable $opt_kernel; then
			pstatus green YES
			kernel_md_clear=1
		else
			kernel_md_clear=0
			pstatus yellow NO
		fi
	fi

	_info_nol "* CPU Hyper-Threading (SMT) is disabled: "
	if sysctl machdep.hyperthreading_allowed >/dev/null 2>&1; then
		kernel_smt_allowed=$(sysctl -n machdep.hyperthreading_allowed 2>/dev/null)
		if [ "$kernel_smt_allowed" = 1 ]; then
			pstatus yellow NO
		else
			pstatus green YES
		fi
	else
		pstatus yellow UNKNOWN "sysctl machdep.hyperthreading_allowed doesn't exist"
	fi

	_info_nol "* Kernel mitigation is enabled: "
	if [ "$kernel_md_clear" = 1 ]; then
		kernel_mds_enabled=$(sysctl -n hw.mds_disable 2>/dev/null)
	else
		kernel_mds_enabled=0
	fi
	case "$kernel_mds_enabled" in
		0) pstatus yellow NO;;
		1) pstatus green YES "with microcode support";;
		2) pstatus green YES "software-only support (SLOW)";;
		3) pstatus green YES;;
		*) pstatus yellow UNKNOWN "unknown value $kernel_mds_enabled"
	esac

	_info_nol "* Kernel mitigation is active: "
	if [ "$kernel_md_clear" = 1 ]; then
		kernel_mds_state=$(sysctl -n hw.mds_disable_state 2>/dev/null)
	else
		kernel_mds_state=inactive
	fi
	# https://github.com/freebsd/freebsd/blob/master/sys/x86/x86/cpu_machdep.c#L953
	case "$kernel_mds_state" in
		inactive)  pstatus yellow NO;;
		VERW)      pstatus green YES "with microcode support";;
		software*) pstatus green YES "software-only support (SLOW)";;
		*)         pstatus yellow UNKNOWN
	esac

	if ! is_cpu_affected "$cve"; then
		pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
	else
		if [ "$cpuid_md_clear" = 1 ]; then
			if [ "$kernel_md_clear" = 1 ]; then
				if [ "$opt_live" = 1 ]; then
					# mitigation must also be enabled
					if [ "$kernel_mds_enabled" -ge 1 ]; then
						if [ "$opt_paranoid" != 1 ] || [ "$kernel_smt_allowed" = 0 ]; then
							pvulnstatus "$cve" OK "Your microcode and kernel are both up to date for this mitigation, and mitigation is enabled"
						else
							pvulnstatus "$cve" VULN "Your microcode and kernel are both up to date for this mitigation, but you must disable SMT (Hyper-Threading) for a complete mitigation"
						fi
					else
						pvulnstatus "$cve" VULN "Your microcode and kernel are both up to date for this mitigation, but the mitigation is not active"
						explain "To enable mitigation, run \`sysctl hw.mds_disable=1'. To make this change persistent across reboots, you can add 'hw.mds_disable=1' to /etc/sysctl.conf."
					fi
				else
					pvulnstatus "$cve" OK "Your microcode and kernel are both up to date for this mitigation"
				fi
			else
				pvulnstatus "$cve" VULN "Your microcode supports mitigation, but your kernel doesn't, upgrade it to mitigate the vulnerability"
			fi
		else
			if [ "$kernel_md_clear" = 1 ]; then
				pvulnstatus "$cve" VULN "Your kernel supports mitigation, but your CPU microcode also needs to be updated to mitigate the vulnerability"
			else
				pvulnstatus "$cve" VULN "Neither your kernel or your microcode support mitigation, upgrade both to mitigate the vulnerability"
			fi
		fi
	fi
}

check_mds_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/mds" '^[^;]+'; then
		sys_interface_available=1
	fi

	if [ "$opt_sysfs_only" != 1 ]; then
		_info_nol "* Kernel supports using MD_CLEAR mitigation: "
		kernel_md_clear=''
		kernel_md_clear_can_tell=1
		if [ "$opt_live" = 1 ] && grep ^flags "$procfs/cpuinfo" | grep -qw md_clear; then
			kernel_md_clear="md_clear found in $procfs/cpuinfo"
			pstatus green YES "$kernel_md_clear"
		fi
		if [ -z "$kernel_md_clear" ]; then
			if ! command -v "${opt_arch_prefix}strings" >/dev/null 2>&1; then
				kernel_md_clear_can_tell=0
			elif [ -n "$kernel_err" ]; then
				kernel_md_clear_can_tell=0
			elif "${opt_arch_prefix}strings" "$kernel" | grep -q 'Clear CPU buffers'; then
				_debug "md_clear: found 'Clear CPU buffers' string in kernel image"
				kernel_md_clear='found md_clear implementation evidence in kernel image'
				pstatus green YES "$kernel_md_clear"
			fi
		fi
		if [ -z "$kernel_md_clear" ]; then
			if [ "$kernel_md_clear_can_tell" = 1 ]; then
				pstatus yellow NO
			else
				pstatus yellow UNKNOWN
			fi
		fi

		if [ "$opt_live" = 1 ] && [ "$sys_interface_available" = 1 ]; then
			_info_nol "* Kernel mitigation is enabled and active: "
			if echo "$fullmsg" | grep -qi ^mitigation; then
				mds_mitigated=1
				pstatus green YES
			else
				mds_mitigated=0
				pstatus yellow NO
			fi
			_info_nol "* SMT is either mitigated or disabled: "
			if echo "$fullmsg" | grep -Eq 'SMT (disabled|mitigated)'; then
				mds_smt_mitigated=1
				pstatus green YES
			else
				mds_smt_mitigated=0
				pstatus yellow NO
			fi
		fi
	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
	else
		if [ "$opt_sysfs_only" != 1 ]; then
			# compute mystatus and mymsg from our own logic
			if [ "$cpuid_md_clear" = 1 ]; then
				if [ -n "$kernel_md_clear" ]; then
					if [ "$opt_live" = 1 ]; then
						# mitigation must also be enabled
						if [ "$mds_mitigated" = 1 ]; then
							if [ "$opt_paranoid" != 1 ] || [ "$mds_smt_mitigated" = 1 ]; then
								mystatus=OK
								mymsg="Your microcode and kernel are both up to date for this mitigation, and mitigation is enabled"
							else
								mystatus=VULN
								mymsg="Your microcode and kernel are both up to date for this mitigation, but you must disable SMT (Hyper-Threading) for a complete mitigation"
							fi
						else
							mystatus=VULN
							mymsg="Your microcode and kernel are both up to date for this mitigation, but the mitigation is not active"
						fi
					else
						mystatus=OK
						mymsg="Your microcode and kernel are both up to date for this mitigation"
					fi
				else
					mystatus=VULN
					mymsg="Your microcode supports mitigation, but your kernel doesn't, upgrade it to mitigate the vulnerability"
				fi
			else
				if [ -n "$kernel_md_clear" ]; then
					mystatus=VULN
					mymsg="Your kernel supports mitigation, but your CPU microcode also needs to be updated to mitigate the vulnerability"
				else
					mystatus=VULN
					mymsg="Neither your kernel or your microcode support mitigation, upgrade both to mitigate the vulnerability"
				fi
			fi
		else
			# sysfs only: return the status/msg we got
			pvulnstatus "$cve" "$status" "$fullmsg"
			return
		fi

		# if we didn't get a msg+status from sysfs, use ours
		if [ -z "$msg" ]; then
			pvulnstatus "$cve" "$mystatus" "$mymsg"
		elif [ "$opt_paranoid" = 1 ]; then
			# if paranoid mode is enabled, we now that we won't agree on status, so take ours
			pvulnstatus "$cve" "$mystatus" "$mymsg"
		elif [ "$status" = "$mystatus" ]; then
			# if we agree on status, we'll print the common status and our message (more detailed than the sysfs one)
			pvulnstatus "$cve" "$status" "$mymsg"
		else
			# if we don't agree on status, maybe our logic is flawed due to a new kernel/mitigation? use the one from sysfs
			pvulnstatus "$cve" "$status" "$msg"
		fi
	fi
}


###################
# TAA SECTION

# Transactional Synchronization Extension (TSX) Asynchronous Abort
check_CVE_2019_11135()
{
	cve='CVE-2019-11135'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_CVE_2019_11135_linux
	elif echo "$os" | grep -q BSD; then
		check_CVE_2019_11135_bsd
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_CVE_2019_11135_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/tsx_async_abort"; then
		# this kernel has the /sys interface, trust it over everything
		sys_interface_available=1
	fi
	if [ "$opt_sysfs_only" != 1 ]; then
		_info_nol "* TAA mitigation is supported by kernel: "
		kernel_taa=''
		if [ -n "$kernel_err" ]; then
			kernel_taa_err="$kernel_err"
		elif grep -q 'tsx_async_abort' "$kernel"; then
			kernel_taa="found tsx_async_abort in kernel image"
		fi
		if [ -n "$kernel_taa" ]; then
			pstatus green YES "$kernel_taa"
		elif [ -n "$kernel_taa_err" ]; then
			pstatus yellow UNKNOWN "$kernel_taa_err"
		else
			pstatus yellow NO
		fi

		_info_nol "* TAA mitigation enabled and active: "
		if [ "$opt_live" = 1 ]; then
			if [ -n "$fullmsg" ]; then
				if echo "$fullmsg" | grep -qE '^Mitigation'; then
					pstatus green YES "$fullmsg"
				else
					pstatus yellow NO
				fi
			else
				pstatus yellow NO "tsx_async_abort not found in sysfs hierarchy"
			fi
		else
			pstatus blue N/A "not testable in offline mode"
		fi
	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi

	if ! is_cpu_affected "$cve" ; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
	elif [ -z "$msg" ]; then
		# if msg is empty, sysfs check didn't fill it, rely on our own test
		if [ "$opt_live" = 1 ]; then
			# if we're in live mode and $msg is empty, sysfs file is not there so kernel is too old
			pvulnstatus $cve VULN "Your kernel doesn't support TAA mitigation, update it"
		else
			if [ -n "$kernel_taa" ]; then
				pvulnstatus $cve OK "Your kernel supports TAA mitigation"
			else
				pvulnstatus $cve VULN "Your kernel doesn't support TAA mitigation, update it"
			fi
		fi
	else
		if [ "$opt_paranoid" = 1 ]; then
			# in paranoid mode, TSX or SMT enabled are not OK, even if TAA is mitigated
			if ! echo "$fullmsg" | grep -qF 'TSX disabled'; then
				pvulnstatus $cve VULN "TSX must be disabled for full mitigation"
			elif echo "$fullmsg" | grep -qF 'SMT vulnerable'; then
				pvulnstatus $cve VULN "SMT (HyperThreading) must be disabled for full mitigation"
			else
				pvulnstatus $cve "$status" "$msg"
			fi
		else
			pvulnstatus $cve "$status" "$msg"
		fi
	fi
}

check_CVE_2019_11135_bsd()
{
	if ! is_cpu_affected "$cve" ; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
	else
		pvulnstatus "$cve" UNK "your CPU is affected, but mitigation detection has not yet been implemented for BSD in this script"
	fi
}

#######################
# iTLB Multihit section

check_CVE_2018_12207()
{
	cve='CVE-2018-12207'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_CVE_2018_12207_linux
	elif echo "$os" | grep -q BSD; then
		check_CVE_2018_12207_bsd
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_CVE_2018_12207_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/itlb_multihit"; then
		# this kernel has the /sys interface, trust it over everything
		sys_interface_available=1
	fi
	if [ "$opt_sysfs_only" != 1 ]; then
		check_has_vmm

		_info_nol "* iTLB Multihit mitigation is supported by kernel: "
		kernel_itlbmh=''
		if [ -n "$kernel_err" ]; then
			kernel_itlbmh_err="$kernel_err"
		# commit 5219505fcbb640e273a0d51c19c38de0100ec5a9
		elif grep -q 'itlb_multihit' "$kernel"; then
			kernel_itlbmh="found itlb_multihit in kernel image"
		fi
		if [ -n "$kernel_itlbmh" ]; then
			pstatus green YES "$kernel_itlbmh"
		elif [ -n "$kernel_itlbmh_err" ]; then
			pstatus yellow UNKNOWN "$kernel_itlbmh_err"
		else
			pstatus yellow NO
		fi

		_info_nol "* iTLB Multihit mitigation enabled and active: "
		if [ "$opt_live" = 1 ]; then
			if [ -n "$fullmsg" ]; then
				if echo "$fullmsg" | grep -qF 'Mitigation'; then
					pstatus green YES "$fullmsg"
				else
					pstatus yellow NO
				fi
			else
				pstatus yellow NO "itlb_multihit not found in sysfs hierarchy"
			fi
		else
			pstatus blue N/A "not testable in offline mode"
		fi
	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi

	if ! is_cpu_affected "$cve" ; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
	elif [ "$has_vmm" = 0 ]; then
		pvulnstatus "$cve" OK "this system is not running a hypervisor"
	elif [ -z "$msg" ]; then
		# if msg is empty, sysfs check didn't fill it, rely on our own test
		if [ "$opt_live" = 1 ]; then
			# if we're in live mode and $msg is empty, sysfs file is not there so kernel is too old
			pvulnstatus $cve VULN "Your kernel doesn't support iTLB Multihit mitigation, update it"
		else
			if [ -n "$kernel_itlbmh" ]; then
				pvulnstatus $cve OK "Your kernel supports iTLB Multihit mitigation"
			else
				pvulnstatus $cve VULN "Your kernel doesn't support iTLB Multihit mitigation, update it"
			fi
		fi
	else
		pvulnstatus $cve "$status" "$msg"
	fi
}

check_CVE_2018_12207_bsd()
{
	_info_nol "* Kernel supports disabling superpages for executable mappings under EPT: "
	kernel_2m_x_ept=$(sysctl -n vm.pmap.allow_2m_x_ept 2>/dev/null)
	if [ -z "$kernel_2m_x_ept" ]; then
		pstatus yellow NO
	else
		pstatus green YES
	fi

	_info_nol "* Superpages are disabled for executable mappings under EPT: "
	if [ "$kernel_2m_x_ept" = 0 ]; then
		pstatus green YES
	else
		pstatus yellow NO
	fi

	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	elif [ -z "$kernel_2m_x_ept" ]; then
		pvulnstatus $cve VULN "Your kernel doesn't support mitigating this CVE, you should update it"
	elif [ "$kernel_2m_x_ept" != 0 ]; then
		pvulnstatus $cve VULN "Your kernel supports mitigating this CVE, but the mitigation is disabled"
		explain "To enable the mitigation, use \`sysctl vm.pmap.allow_2m_x_ept=0\`"
	else
		pvulnstatus $cve OK "Your kernel has support for mitigation and the mitigation is enabled"
	fi
}

###################
# SRBDS SECTION

# Special Register Buffer Data Sampling (SRBDS)
check_CVE_2020_0543()
{
	cve='CVE-2020-0543'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_CVE_2020_0543_linux
	elif echo "$os" | grep -q BSD; then
		check_CVE_2020_0543_bsd
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_CVE_2020_0543_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/srbds"; then
		# this kernel has the /sys interface, trust it over everything
		sys_interface_available=1
	fi
	if [ "$opt_sysfs_only" != 1 ]; then
		_info_nol "* SRBDS mitigation control is supported by the kernel: "
		kernel_srbds=''
		if [ -n "$kernel_err" ]; then
			kernel_srbds_err="$kernel_err"
		elif grep -q 'Dependent on hypervisor' "$kernel"; then
			kernel_srbds="found SRBDS implementation evidence in kernel image. Your kernel is up to date for SRBDS mitigation"
		fi
		if [ -n "$kernel_srbds" ]; then
			pstatus green YES "$kernel_srbds"
		elif [ -n "$kernel_srbds_err" ]; then
			pstatus yellow UNKNOWN "$kernel_srbds_err"
		else
			pstatus yellow NO
		fi
		_info_nol "* SRBDS mitigation control is enabled and active: "
		if [ "$opt_live" = 1 ]; then
			if [ -n "$fullmsg" ]; then
				if echo "$fullmsg" | grep -qE '^Mitigation'; then
					pstatus green YES "$fullmsg"
				else
					pstatus yellow NO
				fi
			else
				pstatus yellow NO "SRBDS not found in sysfs hierarchy"
			fi
		else
			pstatus blue N/A "not testable in offline mode"
		fi
	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi
	if ! is_cpu_affected "$cve" ; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
	else
		if [ "$opt_sysfs_only" != 1 ]; then
			if [ "$cpuid_srbds" = 1 ]; then
				# SRBDS mitigation control exists
				if [ "$srbds_on" = 1 ]; then
					# SRBDS mitigation control is enabled
					if [ -z "$msg" ]; then
						# if msg is empty, sysfs check didn't fill it, rely on our own test
						if [ "$opt_live" = 1 ]; then
							# if we're in live mode and $msg is empty, sysfs file is not there so kernel is too old
							pvulnstatus "$cve" OK "Your microcode is up to date for SRBDS mitigation control. The kernel needs to be updated"
						fi
					else
						if [ -n "$kernel_srbds" ]; then
							pvulnstatus "$cve" OK "Your microcode and kernel are both up to date for SRBDS mitigation control. Mitigation is enabled"
						else
							pvulnstatus "$cve" OK "Your microcode is up to date for SRBDS mitigation control. The kernel needs to be updated"
						fi
					fi
				elif [ "$srbds_on" = 0 ]; then
					# SRBDS mitigation control is disabled
					if [ -z "$msg" ]; then
						if [ "$opt_live" = 1 ]; then
							# if we're in live mode and $msg is empty, sysfs file is not there so kernel is too old
							pvulnstatus "$cve" VULN "Your microcode is up to date for SRBDS mitigation control. The kernel needs to be updated. Mitigation is disabled"
						fi
					else
						if [ -n "$kernel_srbds" ]; then
							pvulnstatus "$cve" VULN "Your microcode and kernel are both up to date for SRBDS mitigation control. Mitigation is disabled"
						else
							pvulnstatus "$cve" VULN "Your microcode is up to date for SRBDS mitigation control. The kernel needs to be updated. Mitigation is disabled"
						fi
					fi
				else
					# rdmsr: CPU 0 cannot read MSR 0x00000123
					pvulnstatus "$cve" UNK "Not able to enumerate MSR for SRBDS mitigation control"
				fi
			else
				# [ $cpuid_srbds != 1 ]
				pvulnstatus "$cve" VULN "Your CPU microcode may need to be updated to mitigate the vulnerability"
			fi
		else
			# sysfs only: return the status/msg we got
			pvulnstatus "$cve" "$status" "$fullmsg"
			return
		fi
	fi
}

check_CVE_2020_0543_bsd()
{
	if ! is_cpu_affected "$cve"; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus $cve OK "your CPU vendor reported your CPU model as not affected"
	else
		pvulnstatus "$cve" UNK "your CPU is affected, but mitigation detection has not yet been implemented for BSD in this script"
	fi
}

####################
# Zenbleed section

check_CVE_2023_20593()
{
	cve='CVE-2023-20593'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]; then
		check_CVE_2023_20593_linux
	#elif echo "$os" | grep -q BSD; then
	#	check_CVE_2023_20593_bsd
	else
		_warn "Unsupported OS ($os)"
	fi
}

check_CVE_2023_20593_linux()
{
	status=UNK
	sys_interface_available=0
	msg=''
	if [ "$opt_sysfs_only" != 1 ]; then
		_info_nol "* Zenbleed mitigation is supported by kernel: "
		kernel_zenbleed=''
		if [ -n "$kernel_err" ]; then
			kernel_zenbleed_err="$kernel_err"
		# commit 522b1d69219d8f083173819fde04f994aa051a98
		elif grep -q 'Zenbleed:' "$kernel"; then
			kernel_zenbleed="found zenbleed message in kernel image"
		fi
		if [ -n "$kernel_zenbleed" ]; then
			pstatus green YES "$kernel_zenbleed"
		elif [ -n "$kernel_zenbleed_err" ]; then
			pstatus yellow UNKNOWN "$kernel_zenbleed_err"
		else
			pstatus yellow NO
		fi
		_info_nol "* Zenbleed kernel mitigation enabled and active: "
		if [ "$opt_live" = 1 ]; then
			# read the DE_CFG MSR, we want to check the 9th bit
			# don't do it on non-Zen2 AMD CPUs or later, aka Family 17h,
			# as the behavior could be unknown on others
			if is_amd && [ "$cpu_family" -ge $((0x17)) ]; then
				read_msr 0xc0011029; ret=$?
				if [ $ret = $READ_MSR_RET_OK ]; then
					if [ $(( read_msr_value >> 9 & 1 )) -eq 1 ]; then
						pstatus green YES "FP_BACKUP_FIX bit set in DE_CFG"
						fp_backup_fix=1
					else
						pstatus yellow NO "FP_BACKUP_FIX is cleared in DE_CFG"
						fp_backup_fix=0
					fi
				elif [ $ret = $READ_MSR_RET_KO ]; then
					pstatus yellow UNKNOWN "Couldn't read the DE_CFG MSR"
				else
					pstatus yellow UNKNOWN "$read_msr_msg"
				fi
			else
				fp_backup_fix=0
				pstatus blue N/A "CPU is incompatible"
			fi
		else
			pstatus blue N/A "not testable in offline mode"
		fi

		_info_nol "* Zenbleed mitigation is supported by CPU microcode: "
		has_zenbleed_fixed_firmware; ret=$?
		if [ $ret -eq 0 ]; then
			pstatus green YES
			cpu_ucode_zenbleed=1
		elif [ $ret -eq 1 ]; then
			pstatus yellow NO
			cpu_ucode_zenbleed=2
		else
			pstatus yellow UNKNOWN
			cpu_ucode_zenbleed=3
		fi

	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi

	if ! is_cpu_affected "$cve" ; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
	elif [ -z "$msg" ]; then
		# if msg is empty, sysfs check didn't fill it, rely on our own test
		zenbleed_print_vuln=0
		if [ "$opt_live" = 1 ]; then
			if [ "$fp_backup_fix" = 1 ] && [ "$cpu_ucode_zenbleed" = 1 ]; then
				# this should never happen, but if it does, it's interesting to know
				pvulnstatus $cve OK "Both your CPU microcode and kernel are mitigating Zenbleed"
			elif [ "$cpu_ucode_zenbleed" = 1 ]; then
				pvulnstatus $cve OK "Your CPU microcode mitigates Zenbleed"
			elif [ "$fp_backup_fix" = 1 ]; then
				pvulnstatus $cve OK "Your kernel mitigates Zenbleed"
			else
				zenbleed_print_vuln=1
			fi
		else
			if [ "$cpu_ucode_zenbleed" = 1 ]; then
				pvulnstatus $cve OK "Your CPU microcode mitigates Zenbleed"
			elif [ -n "$kernel_zenbleed" ]; then
				pvulnstatus $cve OK "Your kernel mitigates Zenbleed"
			else
				zenbleed_print_vuln=1
			fi
		fi
		if [ "$zenbleed_print_vuln" = 1 ]; then
			pvulnstatus $cve VULN "Your kernel is too old to mitigate Zenbleed and your CPU microcode doesn't mitigate it either"
			explain "Your CPU vendor may have a new microcode for your CPU model that mitigates this issue (refer to the hardware section above).\n " \
"Otherwise, the Linux kernel is able to mitigate this issue regardless of the microcode version you have, but in this case\n " \
"your kernel is too old to support this, your Linux distribution vendor might have a more recent version you should upgrade to.\n " \
"Note that either having an up to date microcode OR an up to date kernel is enough to mitigate this issue.\n " \
"To manually mitigate the issue right now, you may use the following command: \`wrmsr -a 0xc0011029 \$((\$(rdmsr -c 0xc0011029) | (1<<9)))\`,\n " \
"however note that this manual mitigation will only be active until the next reboot."
		fi
		unset zenbleed_print_vuln
	else
		pvulnstatus $cve "$status" "$msg"
	fi
}

#########################
# Downfall section

check_CVE_2022_40982() {
	cve='CVE-2022-40982'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]
	then
		check_CVE_2022_40982_linux
	else
		_warn "Unsupported OS ($os)."
	fi
}

check_CVE_2022_40982_linux() {
	status=UNK
	sys_interface_available=0
	msg=''

	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/gather_data_sampling"; then
		# this kernel has the /sys interface, trust it over everything
		sys_interface_available=1
	fi

	if [ "$opt_sysfs_only" != 1 ]; then
		_info_nol "* GDS is mitigated by microcode: "
		if [ "$capabilities_gds_ctrl" = 1 ] && [ "$mcu_opt_ctrl_gds_mitg_dis" = 0 ]; then
			pstatus green OK "microcode mitigation is supported and enabled"
		else
			pstatus yellow NO
		fi
		_info_nol "* Kernel supports software mitigation by disabling AVX: "
		if [ -n "$kernel_err" ]; then	
			kernel_gds_err="$kernel_err"
		elif grep -q 'gather_data_sampling' "$kernel"; then
			kernel_gds="found gather_data_sampling in kernel image"
		fi
		if [ -n "$kernel_gds" ]; then
			pstatus green YES "$kernel_gds"
		elif [ -n "$kernel_gds_err" ]; then
			pstatus yellow UNKNOWN "$kernel_gds_err"
		else
			pstatus yellow NO
		fi

		if [ -n "$kernel_gds" ]; then
			_info_nol "* Kernel has disabled AVX as a mitigation: "

			# Check dmesg message to see whether AVX has been disabled
			dmesg_grep 'Microcode update needed! Disabling AVX as mitigation'; dmesgret=$?
			if [ $dmesgret -eq 0 ]; then
				kernel_avx_disabled="AVX disabled by the kernel (dmesg)"
				pstatus green YES "$kernel_avx_disabled"
			elif [ "$has_avx2" = 0 ]; then
				# Find out by ourselves
				# cpuinfo says we don't have AVX2, query
				# the CPU directly about AVX2 support
				read_cpuid 0x7 0x0 $EBX 5 1 1; ret=$?
				if [ $ret -eq $READ_CPUID_RET_OK ]; then
					kernel_avx_disabled="AVX disabled by the kernel (cpuid)"
					pstatus green YES "$kernel_avx_disabled"
				elif [ $ret -eq $READ_CPUID_RET_KO ]; then
					pstatus yellow NO "CPU doesn't support AVX"
				elif [ $dmesgret -eq 2 ]; then
					pstatus yellow UNKNOWN "dmesg truncated, can't tell whether mitigation is active, please reboot and relaunch this script"
				else
					pstatus yellow UNKNOWN "No sign of mitigation in dmesg and couldn't read cpuid info"
				fi
			else
					pstatus yellow NO "AVX support is enabled"
			fi
		fi

	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi

	if ! is_cpu_affected "$cve" ; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
	elif [ -z "$msg" ]; then
		# if msg is empty, sysfs check didn't fill it, rely on our own test
		if [ "$capabilities_gds_ctrl" = 1 ] && [ "$mcu_opt_ctrl_gds_mitg_dis" = 0 ]; then
			pvulnstatus $cve OK "Your microcode is up to date and mitigation is enabled"
		elif [ "$capabilities_gds_ctrl" = 1 ] && [ "$mcu_opt_ctrl_gds_mitg_dis" = 1 ]; then
			pvulnstatus $cve VULN "Your microcode is up to date but mitigation is disabled"
		elif [ -z "$kernel_gds" ]; then
			pvulnstatus $cve VULN "Your microcode doesn't mitigate the vulnerability, and your kernel doesn't support mitigation"
		elif [ -z "$kernel_avx_disabled" ]; then
			pvulnstatus $cve VULN "Your microcode doesn't mitigate the vulnerability, your kernel support the mitigation but the script did not detect AVX as disabled by the kernel"
		else
			pvulnstatus $cve OK "Your microcode doesn't mitigate the vulnerability, but your kernel has disabled AVX support"
		fi
	else
		pvulnstatus $cve "$status" "$msg"
	fi
}

#######################
# Inception section

check_CVE_2023_20569() {
	cve='CVE-2023-20569'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]
	then
		check_CVE_2023_20569_linux
	else
		_warn "Unsupported OS ($os)."
	fi
}

check_CVE_2023_20569_linux() {
	status=UNK
	sys_interface_available=0
	msg=''

	if sys_interface_check "/sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow"; then
		# this kernel has the /sys interface, trust it over everything
		sys_interface_available=1
	fi

	if [ "$opt_sysfs_only" != 1 ]; then
		_info_nol "* Kernel supports mitigation: "
		if [ -n "$kernel_err" ]; then
			kernel_sro_err="$kernel_err"
		elif grep -q 'spec_rstack_overflow' "$kernel"; then
			kernel_sro="found spec_rstack_overflow in kernel image"
		fi
		if [ -n "$kernel_sro" ]; then
			pstatus green YES "$kernel_sro"
		elif [ -n "$kernel_sro_err" ]; then
			pstatus yellow UNKNOWN "$kernel_sro_err"
		else
			pstatus yellow NO
		fi

		_info_nol "* Kernel compiled with SRSO support: "
		if [ -r "$opt_config" ]; then
			if grep -q '^CONFIG_CPU_SRSO=y' "$opt_config"; then
				pstatus green YES
				kernel_srso="CONFIG_CPU_SRSO=y found in kernel config"
			else
				pstatus yellow NO "required for safe RET and ibpb_on_vmexit mitigations"
			fi
		else
			# https://github.com/torvalds/linux/commit/138bcddb86d8a4f842e4ed6f0585abc9b1a764ff#diff-17bd24a7a7850613cced545790ac30646097e8d6207348c2bd1845f397acb390R2313
			if [ -n "$kernel_err" ]; then
				pstatus yellow UNKNOWN "$kernel_err"
			elif grep -q 'WARNING: kernel not compiled with CPU_SRSO' "$kernel"; then
				# this msg is optimized out at compile time if the option is not enabled, see commit referenced above
				# if it's present, then SRSO is NOT compiled in
				pstatus yellow NO "kernel not compiled with CPU_SRSO"
			else
				# if it's not present, then SRSO is compiled in IF kernel_sro==1, otherwise we're just
				# in front of an old kernel that doesn't have the mitigation logic at all
				if [ "$kernel_sro" = 1 ]; then
					kernel_srso="SRSO mitigation logic is compiled in the kernel"
					pstatus green OK "$kernel_srso"
				else
					pstatus yellow NO "your kernel is too old and doesn't have the mitigation logic"
				fi
			fi
		fi

		_info_nol "* Kernel compiled with IBPB_ENTRY support: "
		if [ -r "$opt_config" ]; then
			if grep -q '^CONFIG_CPU_IBPB_ENTRY=y' "$opt_config"; then
				pstatus green YES
				kernel_ibpb_entry="CONFIG_CPU_IBPB_ENTRY=y found in kernel config"
			else
				pstatus yellow NO
			fi
		else
			# https://github.com/torvalds/linux/commit/138bcddb86d8a4f842e4ed6f0585abc9b1a764ff#diff-17bd24a7a7850613cced545790ac30646097e8d6207348c2bd1845f397acb390R2325
			if [ -n "$kernel_err" ]; then
				pstatus yellow UNKNOWN "$kernel_err"
			elif grep -q 'WARNING: kernel not compiled with CPU_IBPB_ENTRY' "$kernel"; then
				# this msg is optimized out at compile time if the option is not enabled, see commit referenced above
				# if it's present, then IBPB_ENTRY is NOT compiled in
				pstatus yellow NO "kernel not compiled with CPU_IBPB_ENTRY"
			else
				# if it's not present, then IBPB_ENTRY is compiled in IF kernel_sro==1, otherwise we're just
				# in front of an old kernel that doesn't have the mitigation logic at all
				if [ "$kernel_sro" = 1 ]; then
					kernel_ibpb_entry="IBPB_ENTRY mitigation logic is compiled in the kernel"
					pstatus green OK "$kernel_ibpb_entry"
				else
					pstatus yellow NO "your kernel is too old and doesn't have the mitigation logic"
				fi
			fi
		fi

		# Zen & Zen2 : if the right IBPB microcode applied + SMT off --> not vuln
		if [ "$cpu_family" = $(( 0x17 )) ]; then
			_info_nol "* CPU supports IBPB: "
			if [ -n "$cpuid_ibpb" ]; then
				pstatus green YES "$cpuid_ibpb"
			else
				pstatus yellow NO
			fi

			_info_nol "* Hyper-Threading (SMT) is enabled: "
			is_cpu_smt_enabled; smt_enabled=$?
			if [ "$smt_enabled" = 0 ]; then
				pstatus yellow YES
			else
				pstatus green NO
			fi
		# Zen 3/4 microcode brings SBPB mitigation
		elif [ "$cpu_family" = $(( 0x19 )) ]; then
			_info_nol "* CPU supports SBPB: "
			if [ "$cpuid_sbpb" = 1 ]; then
				pstatus green YES
			elif [ "$cpuid_sbpb" = 3 ]; then
				pstatus yellow UNKNOWN "cannot write MSR, rerun with --allow-msr-write"
			else
				pstatus yellow NO
			fi
		fi

	elif [ "$sys_interface_available" = 0 ]; then
		# we have no sysfs but were asked to use it only!
		msg="/sys vulnerability interface use forced, but it's not available!"
		status=UNK
	fi

	if ! is_cpu_affected "$cve" ; then
		# override status & msg in case CPU is not vulnerable after all
		pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
	elif [ -z "$msg" ]; then
		# if msg is empty, sysfs check didn't fill it, so we rely on our own logic
		# Zen/Zen2
		if [ "$cpu_family" = $(( 0x17 )) ]; then
			if [ "$smt_enabled" = 0 ]; then
				pvulnstatus "$cve" VULN "SMT is enabled on your Zen/Zen2 CPU, which makes mitigation ineffective"
				explain "For Zen/Zen2 CPUs, proper mitigation needs an up to date microcode, and SMT needs to be disabled (this can be done by adding \`nosmt\` to your kernel command line)"
			elif [ -z "$kernel_sro" ]; then
				pvulnstatus "$cve" VULN "Your kernel is too old and doesn't have the SRSO mitigation logic"
			elif [ -n "$cpuid_ibpb" ]; then
				pvulnstatus "$cve" OK "SMT is disabled and both your kernel and microcode support mitigation"
			else
				pvulnstatus "$cve" VULN "Your microcode is too old"
			fi
		# Zen3/Zen4
		elif [ "$cpu_family" = $(( 0x19 )) ]; then
			if [ -z "$kernel_sro" ]; then
				pvulnstatus "$cve" VULN "Your kernel is too old and doesn't have the SRSO mitigation logic"
			elif [ -z "$kernel_srso" ] && [ -z "$kernel_ibpb_entry" ]; then
				pvulnstatus "$cve" VULN "Your kernel doesn't have either SRSO or IBPB_ENTRY compiled-in"
			elif [ "$cpuid_sbpb" = 3 ]; then
				pvulnstatus "$cve" UNK "Couldn't verify if your microcode supports IBPB (rerun with --allow-msr-write)"
			elif [ "$cpuid_sbpb" = 2 ]; then
				pvulnstatus "$cve" VULN "Your microcode doesn't support SBPB"
			else
				pvulnstatus "$cve" OK "Your kernel and microcode both support mitigation"
			fi
		else
			# not supposed to happen, as normally this CPU should not be affected and not run this code
			pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
		fi
	else
		pvulnstatus $cve "$status" "$msg"
	fi
}

#######################
# Reptar section

check_CVE_2023_23583() {
	cve='CVE-2023-23583'
	_info "\033[1;34m$cve aka '$(cve2name "$cve")'\033[0m"
	if [ "$os" = Linux ]
	then
		check_CVE_2023_23583_linux
	else
		_warn "Unsupported OS ($os)."
	fi
}

check_CVE_2023_23583_linux() {
	status=UNK
	sys_interface_available=0
	msg=''

	# there is no sysfs file for this vuln, and no kernel patch,
	# the mitigation is only ucode-based and there's no flag exposed,
	# so most of the work has already been done by is_cpu_affected()
	if ! is_cpu_affected "$cve" ; then
		pvulnstatus "$cve" OK "your CPU vendor reported your CPU model as not affected"
	else
		_info_nol "* Reptar is mitigated by microcode: "
		if [ "$cpu_ucode" -lt "$reptar_fixed_ucode_version" ]; then
			pstatus yellow NO "You have ucode $(printf "0x%x" $cpu_ucode) and version $(printf "0x%x" $reptar_fixed_ucode_version) minimum is required"
			pvulnstatus $cve VULN "Your microcode is too old to mitigate the vulnerability"
		else
			pstatus green YES "You have ucode $(printf "0x%x" $cpu_ucode) which is recent enough (>= $(printf "0x%x" $reptar_fixed_ucode_version))"
			pvulnstatus $cve OK "Your microcode mitigates the vulnerability"
		fi
	fi
}

#######################
# END OF VULNS SECTIONS

if [ "$opt_no_hw" = 0 ] && [ -z "$opt_arch_prefix" ]; then
	check_cpu
	check_cpu_vulnerabilities
	_info
fi

# now run the checks the user asked for
for cve in $supported_cve_list
do
	if [ "$opt_cve_all" = 1 ] || echo "$opt_cve_list" | grep -qw "$cve"; then
		check_"$(echo "$cve" | tr - _)"
		_info
	fi
done

if [ -n "$final_summary" ]; then
	_info "> \033[46m\033[30mSUMMARY:\033[0m$final_summary"
	_info ""
fi

if [ "$bad_accuracy" = 1 ]; then
	_warn "We're missing some kernel info (see -v), accuracy might be reduced"
fi

_vars=$(set | grep -Ev '^[A-Z_[:space:]]' | grep -v -F 'mockme=' | sort | tr "\n" '|')
_debug "variables at end of script: $_vars"

if [ -n "$mockme" ] && [ "$opt_mock" = 1 ]; then
	if command -v "gzip" >/dev/null 2>&1; then
		# not a useless use of cat: gzipping cpuinfo directly doesn't work well
		# shellcheck disable=SC2002
		if command -v "base64" >/dev/null 2>&1; then
			mock_cpuinfo="$(cat /proc/cpuinfo | gzip -c | base64 -w0)"
		elif command -v "uuencode" >/dev/null 2>&1; then
			mock_cpuinfo="$(cat /proc/cpuinfo | gzip -c | uuencode -m - | grep -Fv 'begin-base64' | grep -Fxv -- '====' | tr -d "\n")"
		fi
	fi
	if [ -n "$mock_cpuinfo" ]; then
		mockme=$(printf "%b\n%b" "$mockme" "SMC_MOCK_CPUINFO='$mock_cpuinfo'")
		unset mock_cpuinfo
	fi
	_info ""
	# shellcheck disable=SC2046
	_warn "To mock this CPU, set those vars: "$(echo "$mockme" | sort -u)
fi

# root check
if [ "$(id -u)" -ne 0 ]; then
	_warn "Note that you should launch this script with root privileges to get completely accurate information."
	_warn "To run it as root, you can try the following command: sudo $0"
	_warn
fi

if [ "$opt_explain" = 0 ]; then
	_info "Need more detailed information about mitigation options? Use --explain"
fi

_info "A false sense of security is worse than no security at all, see --disclaimer"

if [ "$mocked" = 1 ]; then
	_info ""
	_warn "One or several values have been mocked. This should only be done when debugging/testing this script."
	_warn "The results do NOT reflect the actual status of the system we're running on."
fi

if [ "$opt_batch" = 1 ] && [ "$opt_batch_format" = "nrpe" ]; then
	if [ -n "$nrpe_vuln" ]; then
		echo "Vulnerable:$nrpe_vuln"
	else
		echo "OK"
	fi
fi

if [ "$opt_batch" = 1 ] && [ "$opt_batch_format" = "short" ]; then
	_echo 0 "${short_output% }"
fi

if [ "$opt_batch" = 1 ] && [ "$opt_batch_format" = "json" ]; then
	_echo 0 "${json_output%?}]"
fi

if [ "$opt_batch" = 1 ] && [ "$opt_batch_format" = "prometheus" ]; then
	echo "# TYPE specex_vuln_status untyped"
	echo "# HELP specex_vuln_status Exposure of system to speculative execution vulnerabilities"
	printf "%b\n" "$prometheus_output"
fi

# exit with the proper exit code
[ "$global_critical" = 1 ] && exit 2  # critical
[ "$global_unknown"  = 1 ] && exit 3  # unknown
exit 0  # ok

# Dump from Intel affected CPU page:
# - https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
# Only currently-supported CPUs are listed, so only rely on it if the current CPU happens to be in the list.
# We merge it with info from the following file:
# - https://software.intel.com/content/dam/www/public/us/en/documents/affected-processors-transient-execution-attacks-by-cpu-aug02.xlsx
# As it contains some information from older processors, however when information is contradictory between the two sources, the HTML takes precedence as
# it is expected to be updated, whereas the xslx seems to be frozen.
#
# N: Not affected
# S: Affected, software fix
# H: Affected, hardware fix
# M: Affected, MCU update needed
# B: Affected, BIOS update needed
# X: Affected, no planned mitigation
# Y: Affected (this is from the xlsx, no details are available)
#
# %%% INTELDB
# 0x000206A7,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=N,2020-0543=N,
# 0x000206D6,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=N,2020-0543=N,
# 0x000206D7,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=N,2020-0543=N,
# 0x00030673,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x00030678,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x00030679,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000306A9,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=N,2020-0543=Y,
# 0x000306C3,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=N,2020-0543=Y,
# 0x000306D4,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=Y,2020-0543=Y,
# 0x000306E4,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=N,2020-0543=N,
# 0x000306E7,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=N,2020-0543=N,
# 0x000306F2,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000306F4,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=N,2022-40982=N,
# 0x00040651,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=N,2020-0543=Y,
# 0x00040661,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=N,2020-0543=Y,
# 0x00040671,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=Y,2020-0543=Y,
# 0x000406A0,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000406C3,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000406C4,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000406D8,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000406E3,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=MS,
# 0x000406F1,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=N,2022-40982=N,
# 0x00050653,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=N,2022-40982=M,
# 0x00050654,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=N,2022-40982=M,
# 0x00050656,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=MS,2020-0543=N,2022-40982=M,
# 0x00050657,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=MS,2020-0543=N,2022-40982=M,
# 0x0005065A,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x0005065B,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x00050662,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=Y,2018-12130=Y,2018-12207=Y,2018-3615=Y,2018-3620=Y,2018-3639=Y,2018-3640=Y,2018-3646=Y,2019-11135=Y,2020-0543=N,
# 0x00050663,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=N,2022-40982=N,
# 0x00050664,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=N,2022-40982=N,
# 0x00050665,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=N,2022-40982=N,
# 0x000506A0,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000506C9,2017-5715=MS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000506CA,2017-5715=MS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000506D0,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000506E3,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=MS,2022-40982=N,
# 0x000506F1,2017-5715=MS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00060650,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000606A0,2017-5715=Y,2017-5753=Y,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=Y,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000606A4,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000606A5,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000606A6,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000606C1,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000606E1,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x0007065A,2017-5715=Y,2017-5753=Y,2017-5754=Y,2018-12126=Y,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=N,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000706A1,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000706A8,2017-5715=MS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000706E5,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=HM,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x00080660,2017-5715=Y,2017-5753=Y,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=Y,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x00080664,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00080665,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00080667,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000806A0,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=HM,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000806A1,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=HM,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000806C0,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000806C1,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000806C2,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000806D0,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000806D1,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000806E9,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=M,2022-40982=M,
# 0x000806EA,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=MS,2022-40982=M,
# 0x000806EB,2017-5715=MS,2017-5753=S,2017-5754=N,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=M,2018-3646=N,2019-11135=MS,2020-0543=MS,2022-40982=M,
# 0x000806EC,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=MS,2020-0543=MS,2022-40982=M,
# 0x000806F7,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000806F8,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00090660,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00090661,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00090670,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00090671,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00090672,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00090673,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00090674,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x00090675,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000906A0,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000906A2,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000906A3,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000906A4,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=MS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000906C0,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000906E9,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=MS,2022-40982=M,
# 0x000906EA,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=MS,2022-40982=M,
# 0x000906EB,2017-5715=MS,2017-5753=S,2017-5754=S,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=MS,2018-3620=MS,2018-3639=MS,2018-3640=M,2018-3646=MS,2019-11135=MS,2020-0543=MS,2022-40982=M,
# 0x000906EC,2017-5715=MS,2017-5753=S,2017-5754=N,2018-12126=MS,2018-12127=MS,2018-12130=MS,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=M,2018-3646=N,2019-11135=MS,2020-0543=MS,2022-40982=M,
# 0x000906ED,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=M,2018-3646=N,2019-11135=MS,2020-0543=MS,2022-40982=M,
# 0x000A0650,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=M,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000A0651,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=M,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000A0652,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=M,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000A0653,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=M,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000A0655,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=M,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000A0660,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=M,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000A0661,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=S,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=M,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000A0670,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000A0671,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=M,
# 0x000A0680,2017-5715=Y,2017-5753=Y,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=Y,2018-3615=N,2018-3620=N,2018-3639=Y,2018-3640=Y,2018-3646=N,2019-11135=N,2020-0543=N,
# 0x000B0671,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000B06A2,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000B06A3,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000B06F2,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# 0x000B06F5,2017-5715=HS,2017-5753=S,2017-5754=N,2018-12126=N,2018-12127=N,2018-12130=N,2018-12207=N,2018-3615=N,2018-3620=N,2018-3639=HS,2018-3640=N,2018-3646=N,2019-11135=N,2020-0543=N,2022-40982=N,
# %%% ENDOFINTELDB

# We're using MCE.db from the excellent platomav's MCExtractor project
# The builtin version follows, but the user can download an up-to-date copy (to be stored in their $HOME) by using --update-fwdb
# To update the builtin version itself (by *modifying* this very file), use --update-builtin-fwdb
#
# The format below is:
# X,CPUID_HEX,MICROCODE_VERSION_HEX,YYYYMMDD
# with X being either I for Intel, or A for AMD
# When the date is unknown it defaults to 20000101

# %%% MCEDB v282+i20231114+826c
# I,0x00000611,0xFF,0x00000B27,19961218
# I,0x00000612,0xFF,0x000000C6,19961210
# I,0x00000616,0xFF,0x000000C6,19961210
# I,0x00000617,0xFF,0x000000C6,19961210
# I,0x00000619,0xFF,0x000000D2,19980218
# I,0x00000630,0xFF,0x00000013,19960827
# I,0x00000632,0xFF,0x00000020,19960903
# I,0x00000633,0xFF,0x00000036,19980923
# I,0x00000634,0xFF,0x00000037,19980923
# I,0x00000650,0x01,0x00000040,19990525
# I,0x00000650,0x02,0x00000041,19990525
# I,0x00000650,0x08,0x00000045,19990525
# I,0x00000651,0x01,0x00000040,19990525
# I,0x00000652,0x01,0x0000002A,19990512
# I,0x00000652,0x02,0x0000002C,19990517
# I,0x00000652,0x04,0x0000002B,19990512
# I,0x00000653,0x01,0x00000010,19990628
# I,0x00000653,0x02,0x0000000C,19990518
# I,0x00000653,0x04,0x0000000B,19990520
# I,0x00000653,0x08,0x0000000D,19990518
# I,0x00000660,0x01,0x0000000A,19990505
# I,0x00000665,0x10,0x00000003,19990505
# I,0x0000066A,0x02,0x0000000C,19990505
# I,0x0000066A,0x08,0x0000000D,19990505
# I,0x0000066A,0x20,0x0000000B,19990505
# I,0x0000066D,0x02,0x00000005,19990312
# I,0x0000066D,0x08,0x00000006,19990312
# I,0x0000066D,0x20,0x00000007,19990505
# I,0x00000670,0xFF,0x00000007,19980602
# I,0x00000671,0x04,0x00000014,19980811
# I,0x00000672,0x04,0x00000038,19990922
# I,0x00000673,0x04,0x0000002E,19990910
# I,0x00000680,0xFF,0x00000017,19990610
# I,0x00000681,0x01,0x0000000D,19990921
# I,0x00000681,0x04,0x00000010,19990921
# I,0x00000681,0x08,0x0000000F,19990921
# I,0x00000681,0x10,0x00000011,19990921
# I,0x00000681,0x20,0x0000000E,19990921
# I,0x00000683,0x08,0x00000008,19991015
# I,0x00000683,0x20,0x00000007,19991015
# I,0x00000686,0x01,0x00000007,20000505
# I,0x00000686,0x02,0x0000000A,20000504
# I,0x00000686,0x04,0x00000002,20000504
# I,0x00000686,0x10,0x00000008,20000505
# I,0x00000686,0x80,0x0000000C,20000504
# I,0x0000068A,0x10,0x00000001,20001102
# I,0x0000068A,0x20,0x00000004,20001207
# I,0x0000068A,0x80,0x00000005,20001207
# I,0x00000690,0xFF,0x00000004,20000206
# I,0x00000691,0xFF,0x00000001,20020527
# I,0x00000692,0xFF,0x00000001,20020620
# I,0x00000694,0xFF,0x00000002,20020926
# I,0x00000695,0x10,0x00000007,20041109
# I,0x00000695,0x20,0x00000007,20041109
# I,0x00000695,0x80,0x00000047,20041109
# I,0x00000696,0xFF,0x00000001,20000707
# I,0x000006A0,0x04,0x00000003,20000110
# I,0x000006A1,0x04,0x00000001,20000306
# I,0x000006A4,0xFF,0x00000001,20000616
# I,0x000006B0,0xFF,0x0000001A,20010129
# I,0x000006B1,0x10,0x0000001C,20010215
# I,0x000006B1,0x20,0x0000001D,20010220
# I,0x000006B4,0x10,0x00000001,20020110
# I,0x000006B4,0x20,0x00000002,20020111
# I,0x000006D0,0xFF,0x00000006,20030522
# I,0x000006D1,0xFF,0x00000009,20030709
# I,0x000006D2,0xFF,0x00000010,20030814
# I,0x000006D6,0x20,0x00000018,20041017
# I,0x000006D8,0xFF,0x00000021,20060831
# I,0x000006E0,0xFF,0x00000008,20050215
# I,0x000006E1,0xFF,0x0000000C,20050413
# I,0x000006E4,0xFF,0x00000026,20050816
# I,0x000006E8,0x20,0x00000039,20051115
# I,0x000006EC,0x20,0x00000054,20060501
# I,0x000006EC,0x80,0x00000059,20060912
# I,0x000006F0,0xFF,0x00000005,20050818
# I,0x000006F1,0xFF,0x00000012,20051129
# I,0x000006F2,0x01,0x0000005D,20101002
# I,0x000006F2,0x20,0x0000005C,20101002
# I,0x000006F4,0xFF,0x00000028,20060417
# I,0x000006F5,0xFF,0x00000039,20060727
# I,0x000006F6,0x01,0x000000D0,20100930
# I,0x000006F6,0x04,0x000000D2,20101001
# I,0x000006F6,0x20,0x000000D1,20101001
# I,0x000006F7,0x10,0x0000006A,20101002
# I,0x000006F7,0x40,0x0000006B,20101002
# I,0x000006F9,0xFF,0x00000084,20061012
# I,0x000006FA,0x80,0x00000095,20101002
# I,0x000006FB,0x01,0x000000BA,20101003
# I,0x000006FB,0x04,0x000000BC,20101003
# I,0x000006FB,0x08,0x000000BB,20101003
# I,0x000006FB,0x10,0x000000BA,20101003
# I,0x000006FB,0x20,0x000000BA,20101003
# I,0x000006FB,0x40,0x000000BC,20101003
# I,0x000006FB,0x80,0x000000BA,20101003
# I,0x000006FD,0x01,0x000000A4,20101002
# I,0x000006FD,0x20,0x000000A4,20101002
# I,0x000006FD,0x80,0x000000A4,20101002
# I,0x00000F00,0xFF,0xFFFF0001,20000130
# I,0x00000F01,0xFF,0xFFFF0007,20000404
# I,0x00000F02,0xFF,0xFFFF000B,20000518
# I,0x00000F03,0xFF,0xFFFF0001,20000518
# I,0x00000F04,0xFF,0xFFFF0010,20000803
# I,0x00000F05,0xFF,0x0000000C,20000824
# I,0x00000F06,0xFF,0x00000004,20000911
# I,0x00000F07,0x01,0x00000012,20020716
# I,0x00000F07,0x02,0x00000008,20001115
# I,0x00000F08,0xFF,0x00000008,20001101
# I,0x00000F09,0xFF,0x00000008,20010104
# I,0x00000F0A,0x01,0x00000013,20020716
# I,0x00000F0A,0x02,0x00000015,20020821
# I,0x00000F0A,0x04,0x00000014,20020716
# I,0x00000F11,0xFF,0x0000000A,20030729
# I,0x00000F12,0x04,0x0000002E,20030502
# I,0x00000F13,0xFF,0x00000005,20030508
# I,0x00000F20,0xFF,0x00000001,20010423
# I,0x00000F21,0xFF,0x00000003,20010529
# I,0x00000F22,0xFF,0x00000005,20030729
# I,0x00000F23,0xFF,0x0000000D,20010817
# I,0x00000F24,0x02,0x0000001F,20030605
# I,0x00000F24,0x04,0x0000001E,20030605
# I,0x00000F24,0x10,0x00000021,20030610
# I,0x00000F25,0x01,0x00000029,20040811
# I,0x00000F25,0x02,0x0000002A,20040811
# I,0x00000F25,0x04,0x0000002B,20040811
# I,0x00000F25,0x10,0x0000002C,20040826
# I,0x00000F26,0x02,0x00000010,20040805
# I,0x00000F27,0x02,0x00000038,20030604
# I,0x00000F27,0x04,0x00000037,20030604
# I,0x00000F27,0x08,0x00000039,20030604
# I,0x00000F29,0x02,0x0000002D,20040811
# I,0x00000F29,0x04,0x0000002E,20040811
# I,0x00000F29,0x08,0x0000002F,20040811
# I,0x00000F30,0xFF,0x00000013,20030815
# I,0x00000F31,0xFF,0x0000000B,20031021
# I,0x00000F32,0x0D,0x0000000A,20040511
# I,0x00000F33,0x0D,0x0000000C,20050421
# I,0x00000F34,0x1D,0x00000017,20050421
# I,0x00000F36,0xFF,0x00000007,20040309
# I,0x00000F37,0xFF,0x00000003,20031218
# I,0x00000F40,0xFF,0x00000006,20040318
# I,0x00000F41,0x02,0x00000016,20050421
# I,0x00000F41,0xBD,0x00000017,20050422
# I,0x00000F42,0xFF,0x00000003,20050421
# I,0x00000F43,0x9D,0x00000005,20050421
# I,0x00000F44,0x9D,0x00000006,20050421
# I,0x00000F46,0xFF,0x00000004,20050411
# I,0x00000F47,0x9D,0x00000003,20050421
# I,0x00000F48,0x01,0x0000000C,20060508
# I,0x00000F48,0x02,0x0000000E,20080115
# I,0x00000F48,0x5F,0x00000007,20050630
# I,0x00000F49,0xBD,0x00000003,20050421
# I,0x00000F4A,0x5C,0x00000004,20051214
# I,0x00000F4A,0x5D,0x00000002,20050610
# I,0x00000F60,0xFF,0x00000005,20050124
# I,0x00000F61,0xFF,0x00000008,20050610
# I,0x00000F62,0x04,0x0000000F,20051215
# I,0x00000F63,0xFF,0x00000005,20051010
# I,0x00000F64,0x01,0x00000002,20051215
# I,0x00000F64,0x34,0x00000004,20051223
# I,0x00000F65,0x01,0x00000008,20060426
# I,0x00000F66,0xFF,0x0000001B,20060310
# I,0x00000F68,0x22,0x00000009,20060714
# I,0x00001632,0x00,0x00000002,19980610
# I,0x00010650,0xFF,0x00000002,20060513
# I,0x00010660,0xFF,0x00000004,20060612
# I,0x00010661,0x01,0x00000043,20101004
# I,0x00010661,0x02,0x00000042,20101004
# I,0x00010661,0x80,0x00000044,20101004
# I,0x00010670,0xFF,0x00000005,20070209
# I,0x00010671,0xFF,0x00000106,20070329
# I,0x00010674,0xFF,0x84050100,20070726
# I,0x00010676,0x01,0x0000060F,20100929
# I,0x00010676,0x04,0x0000060F,20100929
# I,0x00010676,0x10,0x0000060F,20100929
# I,0x00010676,0x40,0x0000060F,20100929
# I,0x00010676,0x80,0x0000060F,20100929
# I,0x00010677,0x10,0x0000070A,20100929
# I,0x0001067A,0x11,0x00000A0B,20100928
# I,0x0001067A,0x44,0x00000A0B,20100928
# I,0x0001067A,0xA0,0x00000A0B,20100928
# I,0x000106A0,0xFF,0xFFFF001A,20071128
# I,0x000106A1,0xFF,0xFFFF000B,20080220
# I,0x000106A2,0xFF,0xFFFF0019,20080714
# I,0x000106A4,0x03,0x00000012,20130621
# I,0x000106A5,0x03,0x0000001D,20180511
# I,0x000106C0,0xFF,0x00000007,20070824
# I,0x000106C1,0xFF,0x00000109,20071203
# I,0x000106C2,0x01,0x00000217,20090410
# I,0x000106C2,0x04,0x00000218,20090410
# I,0x000106C2,0x08,0x00000219,20090410
# I,0x000106C9,0xFF,0x00000007,20090213
# I,0x000106CA,0x01,0x00000107,20090825
# I,0x000106CA,0x04,0x00000107,20090825
# I,0x000106CA,0x08,0x00000107,20090825
# I,0x000106CA,0x10,0x00000107,20090825
# I,0x000106D0,0xFF,0x00000005,20071204
# I,0x000106D1,0x08,0x00000029,20100930
# I,0x000106E0,0xFF,0xFFFF0022,20090116
# I,0x000106E1,0xFF,0xFFFF000D,20090206
# I,0x000106E2,0xFF,0xFFFF0011,20090924
# I,0x000106E3,0xFF,0xFFFF0011,20090512
# I,0x000106E4,0xFF,0x00000003,20130701
# I,0x000106E5,0x13,0x0000000A,20180508
# I,0x000106F0,0xFF,0xFFFF0009,20090210
# I,0x000106F1,0xFF,0xFFFF0007,20090210
# I,0x00020650,0xFF,0xFFFF0008,20090218
# I,0x00020651,0xFF,0xFFFF0018,20090818
# I,0x00020652,0x12,0x00000011,20180508
# I,0x00020654,0xFF,0xFFFF0007,20091124
# I,0x00020655,0x92,0x00000007,20180423
# I,0x00020661,0x01,0x00000104,20091023
# I,0x00020661,0x02,0x00000105,20110718
# I,0x000206A0,0xFF,0x00000029,20091102
# I,0x000206A1,0xFF,0x00000007,20091223
# I,0x000206A2,0xFF,0x00000027,20100502
# I,0x000206A3,0xFF,0x00000009,20100609
# I,0x000206A4,0xFF,0x00000022,20100414
# I,0x000206A5,0xFF,0x00000007,20100722
# I,0x000206A6,0xFF,0x90030028,20100924
# I,0x000206A7,0x12,0x0000002F,20190217
# I,0x000206C0,0xFF,0xFFFF001C,20091214
# I,0x000206C1,0xFF,0x00000006,20091222
# I,0x000206C2,0x03,0x0000001F,20180508
# I,0x000206D0,0xFF,0x80000006,20100816
# I,0x000206D1,0xFF,0x80000106,20101201
# I,0x000206D2,0xFF,0xAF506958,20110714
# I,0x000206D3,0xFF,0xAF50696A,20110816
# I,0x000206D5,0xFF,0xAF5069E5,20120118
# I,0x000206D6,0x6D,0x00000621,20200304
# I,0x000206D7,0x6D,0x0000071A,20200324
# I,0x000206E0,0xFF,0xE3493401,20090108
# I,0x000206E1,0xFF,0xE3493402,20090224
# I,0x000206E2,0xFF,0xFFFF0004,20081001
# I,0x000206E3,0xFF,0xE4486547,20090701
# I,0x000206E4,0xFF,0xFFFF0008,20090619
# I,0x000206E5,0xFF,0xFFFF0018,20091215
# I,0x000206E6,0x04,0x0000000D,20180515
# I,0x000206F0,0xFF,0x00000005,20100729
# I,0x000206F1,0xFF,0x00000008,20101013
# I,0x000206F2,0x05,0x0000003B,20180516
# I,0x00030650,0xFF,0x00000009,20120118
# I,0x00030651,0xFF,0x00000110,20131014
# I,0x00030660,0xFF,0x00000003,20101103
# I,0x00030661,0xFF,0x0000010F,20150721
# I,0x00030669,0xFF,0x0000010D,20130515
# I,0x00030671,0xFF,0x00000117,20130410
# I,0x00030672,0xFF,0x0000022E,20140401
# I,0x00030673,0xFF,0x83290100,20190916
# I,0x00030678,0x02,0x00000838,20190422
# I,0x00030678,0x0C,0x00000838,20190422
# I,0x00030679,0x0F,0x0000090D,20190710
# I,0x000306A0,0xFF,0x00000007,20110407
# I,0x000306A2,0xFF,0x0000000C,20110725
# I,0x000306A4,0xFF,0x00000007,20110908
# I,0x000306A5,0xFF,0x00000009,20111110
# I,0x000306A6,0xFF,0x00000004,20111114
# I,0x000306A8,0xFF,0x00000010,20120220
# I,0x000306A9,0x12,0x00000021,20190213
# I,0x000306C0,0xFF,0xFFFF0013,20111110
# I,0x000306C1,0xFF,0xFFFF0014,20120725
# I,0x000306C2,0xFF,0xFFFF0006,20121017
# I,0x000306C3,0x32,0x00000028,20191112
# I,0x000306D1,0xFF,0xFFFF0009,20131015
# I,0x000306D2,0xFF,0xFFFF0009,20131219
# I,0x000306D3,0xFF,0xE3121338,20140825
# I,0x000306D4,0xC0,0x0000002F,20191112
# I,0x000306E0,0xFF,0xE920080F,20121113
# I,0x000306E2,0xFF,0xE9220827,20130523
# I,0x000306E3,0xFF,0x00000308,20130321
# I,0x000306E4,0xED,0x0000042E,20190314
# I,0x000306E6,0xED,0x00000600,20130619
# I,0x000306E7,0xED,0x00000715,20190314
# I,0x000306F0,0xFF,0xFFFF0017,20130730
# I,0x000306F1,0xFF,0xD141D629,20140416
# I,0x000306F2,0x6F,0x00000049,20210811
# I,0x000306F3,0xFF,0x0000000D,20160211
# I,0x000306F4,0x80,0x0000001A,20210524
# I,0x00040650,0xFF,0xFFFF000B,20121206
# I,0x00040651,0x72,0x00000026,20191112
# I,0x00040660,0xFF,0xFFFF0011,20121012
# I,0x00040661,0x32,0x0000001C,20191112
# I,0x00040670,0xFF,0xFFFF0006,20140304
# I,0x00040671,0x22,0x00000022,20191112
# I,0x000406A0,0xFF,0x80124001,20130521
# I,0x000406A8,0xFF,0x0000081F,20140812
# I,0x000406A9,0xFF,0x0000081F,20140812
# I,0x000406C1,0xFF,0x0000010B,20140814
# I,0x000406C2,0xFF,0x00000221,20150218
# I,0x000406C3,0x01,0x00000368,20190423
# I,0x000406C4,0x01,0x00000411,20190423
# I,0x000406D0,0xFF,0x0000000E,20130612
# I,0x000406D8,0x01,0x0000012D,20190916
# I,0x000406E1,0xFF,0x00000020,20141111
# I,0x000406E2,0xFF,0x0000002C,20150521
# I,0x000406E3,0xC0,0x000000F0,20211112
# I,0x000406E8,0xFF,0x00000026,20160414
# I,0x000406F0,0xFF,0x00000014,20150702
# I,0x000406F1,0xFF,0x0B000040,20210519
# I,0x00050650,0xFF,0x8000002B,20160208
# I,0x00050651,0xFF,0x8000002B,20160208
# I,0x00050652,0xFF,0x80000037,20170502
# I,0x00050653,0x97,0x01000181,20230323
# I,0x00050654,0xB7,0x02007006,20230306
# I,0x00050655,0xB7,0x03000010,20181116
# I,0x00050656,0xBF,0x04003604,20230317
# I,0x00050657,0xBF,0x05003604,20230317
# I,0x0005065A,0xFF,0x86002302,20210416
# I,0x0005065B,0xBF,0x07002703,20230321
# I,0x00050661,0xFF,0xF1000008,20150130
# I,0x00050662,0x10,0x0000001C,20190617
# I,0x00050663,0x10,0x0700001C,20210612
# I,0x00050664,0x10,0x0F00001A,20210612
# I,0x00050665,0x10,0x0E000014,20210918
# I,0x00050670,0xFF,0xFFFF0030,20151113
# I,0x00050671,0xFF,0x000001B6,20180108
# I,0x000506A0,0xFF,0x00000038,20150112
# I,0x000506C0,0xFF,0x00000002,20140613
# I,0x000506C2,0x01,0x00000014,20180511
# I,0x000506C8,0xFF,0x90011010,20160323
# I,0x000506C9,0x03,0x00000048,20211116
# I,0x000506CA,0x03,0x00000028,20211116
# I,0x000506D1,0xFF,0x00000102,20150605
# I,0x000506E0,0xFF,0x00000018,20141119
# I,0x000506E1,0xFF,0x0000002A,20150602
# I,0x000506E2,0xFF,0x0000002E,20150815
# I,0x000506E3,0x36,0x000000F0,20211112
# I,0x000506E8,0xFF,0x00000034,20160710
# I,0x000506F0,0xFF,0x00000010,20160607
# I,0x000506F1,0x01,0x00000038,20211202
# I,0x00060660,0xFF,0x0000000C,20160821
# I,0x00060661,0xFF,0x0000000E,20170128
# I,0x00060662,0xFF,0x00000022,20171129
# I,0x00060663,0x80,0x0000002A,20180417
# I,0x000606A0,0xFF,0x80000031,20200308
# I,0x000606A4,0xFF,0x0B000280,20200817
# I,0x000606A5,0x87,0x0C0002F0,20210308
# I,0x000606A6,0x87,0x0D0003B9,20230901
# I,0x000606C0,0xFF,0xFD000220,20210629
# I,0x000606C1,0x10,0x01000268,20230908
# I,0x000606E0,0xFF,0x0000000B,20161104
# I,0x000606E1,0xFF,0x00000108,20190423
# I,0x000606E4,0xFF,0x0000000C,20190124
# I,0x000706A0,0xFF,0x00000026,20170712
# I,0x000706A1,0x01,0x0000003E,20220916
# I,0x000706A8,0x01,0x00000022,20220920
# I,0x000706E0,0xFF,0x0000002C,20180614
# I,0x000706E1,0xFF,0x00000042,20190420
# I,0x000706E2,0xFF,0x00000042,20190420
# I,0x000706E3,0xFF,0x81000008,20181002
# I,0x000706E4,0xFF,0x00000046,20190905
# I,0x000706E5,0x80,0x000000C2,20230903
# I,0x00080650,0xFF,0x00000018,20180108
# I,0x00080664,0xFF,0x4C000023,20230222
# I,0x00080665,0xFF,0x4C000023,20230222
# I,0x00080667,0xFF,0x4C000023,20230222
# I,0x000806A0,0xFF,0x00000010,20190507
# I,0x000806A1,0x10,0x00000033,20230113
# I,0x000806C0,0xFF,0x00000068,20200402
# I,0x000806C1,0x80,0x000000B4,20230907
# I,0x000806C2,0xC2,0x00000034,20230907
# I,0x000806D0,0xFF,0x00000054,20210507
# I,0x000806D1,0xC2,0x0000004E,20230907
# I,0x000806E9,0x10,0x000000F4,20230223
# I,0x000806E9,0xC0,0x000000F4,20230222
# I,0x000806EA,0xC0,0x000000F4,20230223
# I,0x000806EB,0xD0,0x000000F4,20230223
# I,0x000806EC,0x94,0x000000F8,20230226
# I,0x000806F1,0xFF,0x800003C0,20220327
# I,0x000806F2,0xFF,0x8C0004E0,20211112
# I,0x000806F3,0xFF,0x8D000520,20220812
# I,0x000806F4,0x10,0x2C000290,20230626
# I,0x000806F4,0x87,0x2B0004D0,20230616
# I,0x000806F5,0x10,0x2C000290,20230626
# I,0x000806F5,0x87,0x2B0004D0,20230616
# I,0x000806F6,0x10,0x2C000290,20230626
# I,0x000806F6,0x87,0x2B0004D0,20230616
# I,0x000806F7,0x87,0x2B0004D0,20230616
# I,0x000806F8,0x10,0x2C000290,20230626
# I,0x000806F8,0x87,0x2B0004D0,20230616
# I,0x00090660,0xFF,0x00000009,20200617
# I,0x00090661,0x01,0x00000017,20220715
# I,0x00090670,0xFF,0x00000019,20201111
# I,0x00090671,0xFF,0x0000001C,20210614
# I,0x00090672,0x07,0x00000032,20230607
# I,0x00090674,0xFF,0x00000219,20210425
# I,0x00090675,0x07,0x00000032,20230607
# I,0x000906A0,0xFF,0x0000001C,20210614
# I,0x000906A1,0xFF,0x0000011F,20211104
# I,0x000906A2,0xFF,0x00000315,20220102
# I,0x000906A3,0x80,0x00000430,20230607
# I,0x000906A4,0x40,0x00000005,20230505
# I,0x000906A4,0x80,0x00000430,20230607
# I,0x000906C0,0x01,0x24000024,20220902
# I,0x000906E9,0x2A,0x000000F4,20230223
# I,0x000906EA,0x22,0x000000F4,20230223
# I,0x000906EB,0x02,0x000000F4,20230223
# I,0x000906EC,0x22,0x000000F4,20230223
# I,0x000906ED,0x22,0x000000FA,20230227
# I,0x000A0650,0xFF,0x000000BE,20191010
# I,0x000A0651,0xFF,0x000000C2,20191113
# I,0x000A0652,0x20,0x000000F8,20230223
# I,0x000A0653,0x22,0x000000F8,20230223
# I,0x000A0654,0xFF,0x000000C6,20200123
# I,0x000A0655,0x22,0x000000F8,20230223
# I,0x000A0660,0x80,0x000000F8,20230223
# I,0x000A0661,0x80,0x000000F8,20230223
# I,0x000A0670,0xFF,0x0000002C,20201124
# I,0x000A0671,0x02,0x0000005D,20230903
# I,0x000A0680,0xFF,0x80000002,20200121
# I,0x000A06A1,0xFF,0x00000017,20230518
# I,0x000A06A2,0xFF,0x00000011,20230627
# I,0x000A06A4,0xFF,0x00000017,20231026
# I,0x000B0670,0xFF,0x0000000E,20220220
# I,0x000B0671,0x32,0x0000011D,20230829
# I,0x000B06A2,0xE0,0x0000411C,20230830
# I,0x000B06A3,0xE0,0x0000411C,20230830
# I,0x000B06E0,0x11,0x00000012,20230626
# I,0x000B06F2,0x07,0x00000032,20230607
# I,0x000B06F5,0x07,0x00000032,20230607
# I,0x000C06F1,0xFF,0x21000200,20231120
# I,0x000C06F2,0xFF,0x21000200,20231120
# A,0x00000F00,0xFF,0x02000008,20070614
# A,0x00000F01,0xFF,0x0000001C,20021031
# A,0x00000F10,0xFF,0x00000003,20020325
# A,0x00000F11,0xFF,0x0000001F,20030220
# A,0x00000F48,0xFF,0x00000046,20040719
# A,0x00000F4A,0xFF,0x00000047,20040719
# A,0x00000F50,0xFF,0x00000024,20021212
# A,0x00000F51,0xFF,0x00000025,20030115
# A,0x00010F50,0xFF,0x00000041,20040225
# A,0x00020F10,0xFF,0x0000004D,20050428
# A,0x00040F01,0xFF,0xC0012102,20050916
# A,0x00040F0A,0xFF,0x00000068,20060920
# A,0x00040F13,0xFF,0x0000007A,20080508
# A,0x00040F14,0xFF,0x00000062,20060127
# A,0x00040F1B,0xFF,0x0000006D,20060920
# A,0x00040F33,0xFF,0x0000007B,20080514
# A,0x00060F80,0xFF,0x00000083,20060929
# A,0x000C0F1B,0xFF,0x0000006E,20060921
# A,0x000F0F00,0xFF,0x00000005,20020627
# A,0x000F0F01,0xFF,0x00000015,20020627
# A,0x00100F00,0xFF,0x01000020,20070326
# A,0x00100F20,0xFF,0x010000CA,20100331
# A,0x00100F22,0xFF,0x010000C9,20100331
# A,0x00100F2A,0xFF,0x01000084,20000101
# A,0x00100F40,0xFF,0x01000085,20080501
# A,0x00100F41,0xFF,0x010000DB,20111024
# A,0x00100F42,0xFF,0x01000092,20081021
# A,0x00100F43,0xFF,0x010000C8,20100311
# A,0x00100F52,0xFF,0x010000DB,20000101
# A,0x00100F53,0xFF,0x010000C8,20000101
# A,0x00100F62,0xFF,0x010000C7,20100311
# A,0x00100F80,0xFF,0x010000DA,20111024
# A,0x00100F81,0xFF,0x010000D9,20111012
# A,0x00100F91,0xFF,0x010000D9,20000101
# A,0x00100FA0,0xFF,0x010000DC,20111024
# A,0x00120F00,0xFF,0x03000002,20100324
# A,0x00200F30,0xFF,0x02000018,20070921
# A,0x00200F31,0xFF,0x02000057,20080502
# A,0x00200F32,0xFF,0x02000034,20080307
# A,0x00300F01,0xFF,0x0300000E,20101004
# A,0x00300F10,0xFF,0x03000027,20111209
# A,0x00500F00,0xFF,0x0500000B,20100601
# A,0x00500F01,0xFF,0x0500001A,20100908
# A,0x00500F10,0xFF,0x05000029,20130121
# A,0x00500F20,0xFF,0x05000119,20130118
# A,0x00580F00,0xFF,0x0500000B,20100601
# A,0x00580F01,0xFF,0x0500001A,20100908
# A,0x00580F10,0xFF,0x05000028,20101124
# A,0x00580F20,0xFF,0x05000103,20110526
# A,0x00600F00,0xFF,0x06000017,20101029
# A,0x00600F01,0xFF,0x0600011F,20110227
# A,0x00600F10,0xFF,0x06000425,20110408
# A,0x00600F11,0xFF,0x0600050D,20110627
# A,0x00600F12,0xFF,0x0600063E,20180207
# A,0x00600F20,0xFF,0x06000852,20180206
# A,0x00610F00,0xFF,0x0600100E,20111102
# A,0x00610F01,0xFF,0x0600111F,20180305
# A,0x00630F00,0xFF,0x0600301C,20130817
# A,0x00630F01,0xFF,0x06003109,20180227
# A,0x00660F00,0xFF,0x06006108,20150302
# A,0x00660F01,0xFF,0x0600611A,20180126
# A,0x00670F00,0xFF,0x06006705,20180220
# A,0x00680F00,0xFF,0x06000017,20101029
# A,0x00680F01,0xFF,0x0600011F,20110227
# A,0x00680F10,0xFF,0x06000410,20110314
# A,0x00690F00,0xFF,0x06001009,20110613
# A,0x00700F00,0xFF,0x0700002A,20121218
# A,0x00700F01,0xFF,0x07000110,20180209
# A,0x00730F00,0xFF,0x07030009,20131206
# A,0x00730F01,0xFF,0x07030106,20180209
# A,0x00800F00,0xFF,0x0800002A,20161006
# A,0x00800F10,0xFF,0x0800100C,20170131
# A,0x00800F11,0xFF,0x08001138,20190204
# A,0x00800F12,0xFF,0x0800126E,20211111
# A,0x00800F82,0xFF,0x0800820D,20190416
# A,0x00810F00,0xFF,0x08100004,20161120
# A,0x00810F10,0xFF,0x08101016,20190430
# A,0x00810F11,0xFF,0x08101103,20190417
# A,0x00810F80,0xFF,0x08108002,20180605
# A,0x00810F81,0xFF,0x08108109,20190417
# A,0x00820F00,0xFF,0x08200002,20180214
# A,0x00820F01,0xFF,0x08200103,20190417
# A,0x00830F00,0xFF,0x08300027,20190401
# A,0x00830F10,0xFF,0x0830107B,20230816
# A,0x00850F00,0xFF,0x08500004,20180212
# A,0x00860F00,0xFF,0x0860000E,20200127
# A,0x00860F01,0xFF,0x08600109,20220328
# A,0x00860F81,0xFF,0x08608104,20220328
# A,0x00870F00,0xFF,0x08700004,20181206
# A,0x00870F10,0xFF,0x08701030,20220328
# A,0x00890F00,0xFF,0x08900007,20200921
# A,0x00890F01,0xFF,0x08900103,20201105
# A,0x00890F02,0xFF,0x08900201,20210114
# A,0x00890F10,0xFF,0x08901001,20220309
# A,0x008A0F00,0xFF,0x08A00008,20230615
# A,0x00A00F00,0xFF,0x0A000033,20200413
# A,0x00A00F10,0xFF,0x0A001079,20230609
# A,0x00A00F11,0xFF,0x0A0011D1,20230710
# A,0x00A00F12,0xFF,0x0A001234,20230710
# A,0x00A00F80,0xFF,0x0A008003,20211015
# A,0x00A00F82,0xFF,0x0A008205,20220414
# A,0x00A10F00,0xFF,0x0A10004B,20220309
# A,0x00A10F01,0xFF,0x0A100104,20220207
# A,0x00A10F0B,0xFF,0x0A100B07,20220610
# A,0x00A10F10,0xFF,0x0A101020,20220913
# A,0x00A10F11,0xFF,0x0A101144,20230906
# A,0x00A10F12,0xFF,0x0A101244,20230911
# A,0x00A10F80,0xFF,0x0A108005,20230613
# A,0x00A10F81,0xFF,0x0A108105,20230711
# A,0x00A20F00,0xFF,0x0A200025,20200121
# A,0x00A20F10,0xFF,0x0A20102B,20230707
# A,0x00A20F12,0xFF,0x0A20120E,20230707
# A,0x00A40F00,0xFF,0x0A400016,20210330
# A,0x00A40F40,0xFF,0x0A404002,20210408
# A,0x00A40F41,0xFF,0x0A404102,20211018
# A,0x00A50F00,0xFF,0x0A50000F,20230707
# A,0x00A60F00,0xFF,0x0A600005,20211220
# A,0x00A60F11,0xFF,0x0A601119,20230613
# A,0x00A60F12,0xFF,0x0A601206,20230613
# A,0x00A70F00,0xFF,0x0A700003,20220517
# A,0x00A70F40,0xFF,0x0A704001,20220721
# A,0x00A70F41,0xFF,0x0A704104,20230713
# A,0x00A70F42,0xFF,0x0A704202,20230713
# A,0x00A70F52,0xFF,0x0A705203,20230713
# A,0x00A70F80,0xFF,0x0A708004,20230713
# A,0x00AA0F00,0xFF,0x0AA00009,20221006
# A,0x00AA0F01,0xFF,0x0AA00116,20230619
# A,0x00AA0F02,0xFF,0x0AA00213,20230911