detect retpoline-compliant compiler from latest LKML patches

Remove superfluous 'YES' output when checking cpuinfo

spectre-meltdown-checker.sh

@@ -1,7 +1,7 @@
 #! /bin/sh
 # Spectre & Meltdown checker
 # Stephane Lesimple
-VERSION=0.11
+VERSION=0.15
 
 # print status function
 pstatus()
@@ -84,12 +84,15 @@ extract_vmlinux()
 # root check
 
 if [ "$(id -u)" -ne 0 ]; then
-	/bin/echo -e "\033[31mNote that you should launch this script with root privileges to get accurate information."
+	/bin/echo -e "\033[31mNote that you should launch this script with root privileges to get accurate information.\033[0m"
-	/bin/echo -e "\033[31mWe'll proceed but you might see permission denied errors."
+	/bin/echo -e "\033[31mWe'll proceed but you might see permission denied errors.\033[0m"
-	/bin/echo -e "\033[31mTo run it as root, you can try the following command: sudo $0"
+	/bin/echo -e "\033[31mTo run it as root, you can try the following command: sudo $0\033[0m"
 	/bin/echo
 fi
 
+/bin/echo -e "Checking vulnerabilities against \033[35m"$(uname -s) $(uname -r) $(uname -v) $(uname -m)"\033[0m"
+/bin/echo
+
 ###########
 # SPECTRE 1
 /bin/echo -e "\033[1;34mCVE-2017-5753 [bounds check bypass] aka 'Spectre Variant 1'\033[0m"
@@ -114,13 +117,16 @@ else
 	else
 		# here we disassemble the kernel and count the number of occurences of the LFENCE opcode
 		# in non-patched kernels, this has been empirically determined as being around 40-50
-		# in patched kernels, this is more around 70-80
+		# in patched kernels, this is more around 70-80, sometimes way higher (100+)
+		# v0.13: 68 found in a 3.10.23-xxxx-std-ipv6-64 (with lots of modules compiled-in directly), which doesn't have the LFENCE patches,
+		# so let's push the threshold to 70.
+		# TODO LKML patch is starting to dump LFENCE in favor of the PAUSE opcode, we might need to check that (patch not stabilized yet)
 		nb_lfence=$(objdump -D "$vmlinux" | grep -wc lfence)
-		if [ "$nb_lfence" -lt 60 ]; then
+		if [ "$nb_lfence" -lt 70 ]; then
-			pstatus red NO "only $nb_lfence opcodes found, should be >= 60"
+			pstatus red NO "only $nb_lfence opcodes found, should be >= 70"
 			status=1
 		else
-			pstatus green YES "$nb_lfence opcodes found, which is >= 60"
+			pstatus green YES "$nb_lfence opcodes found, which is >= 70"
 			status=2
 		fi
 	fi
@@ -161,7 +167,7 @@ if [ "$insmod_msr" = 1 ]; then
 fi
 
 /bin/echo -n "*   Kernel support for IBRS: "
-if [ -e /sys/kernel/debug/sched_features ]; then
+if [ ! -e /sys/kernel/debug/sched_features ]; then
 	# try to mount the debugfs hierarchy ourselves and remember it to umount afterwards
 	mount -t debugfs debugfs /sys/kernel/debug 2>/dev/null && mounted_debugfs=1
 fi
@@ -169,11 +175,16 @@ if [ -e /sys/kernel/debug/ibrs_enabled ]; then
 	# if the file is there, we have IBRS compiled-in
 	pstatus green YES
 	ibrs_supported=1
+	ibrs_enabled=$(cat /sys/kernel/debug/ibrs_enabled 2>/dev/null)
+elif [ -e /sys/kernel/debug/x86/ibrs_enabled ]; then
+	# RedHat uses a different path (see https://access.redhat.com/articles/3311301)
+	pstatus green YES
+	ibrs_supported=1
+	ibrs_enabled=$(cat /sys/kernel/debug/x86/ibrs_enabled 2>/dev/null)
 else
 	pstatus red NO
 fi
 
-ibrs_enabled=$(cat /sys/kernel/debug/ibrs_enabled 2>/dev/null)
 /bin/echo -n "*   IBRS enabled for Kernel space: "
 # 0 means disabled
 # 1 is enabled only for kernel space
@@ -190,19 +201,12 @@ case "$ibrs_enabled" in
 	"") [ "$ibrs_supported" = 1 ] && pstatus yellow UNKNOWN || pstatus red NO;;
 	0 | 1) pstatus red NO;;
 	2) pstatus green YES;;
-	*) pstatus yellow unknown;;
+	*) pstatus yellow UNKNOWN;;
 esac
 
-if [ "$mounted_debugfs" = 1 ]; then
-	# umount debugfs if we did mount it ourselves
-	umount /sys/kernel/debug
-fi
-
 /bin/echo "* Mitigation 2"
-/bin/echo -n "*   Kernel compiled with retpolines: "
+/bin/echo -n "*   Kernel compiled with retpoline option: "
 # We check the RETPOLINE kernel options
-# XXX this doesn't mean the kernel has been compiled with a retpoline-aware gcc
-# still looking for a way do detect that ...
 if [ -e /proc/config.gz ]; then
 	# either the running kernel exports his own config
 	if zgrep -q '^CONFIG_RETPOLINE=y' /proc/config.gz; then
@@ -223,15 +227,48 @@ else
 	pstatus yellow UNKNOWN "couldn't read your kernel configuration"
 fi
 
+/bin/echo -n "*   Kernel compiled with a retpoline-aware compiler: "
+# Now check if the compiler used to compile the kernel knows how to insert retpolines in generated asm
+# For gcc, this is -mindirect-branch=thunk-extern (detected by the kernel makefiles)
+# See gcc commit https://github.com/hjl-tools/gcc/commit/23b517d4a67c02d3ef80b6109218f2aadad7bd79
+# In latest retpoline LKML patches, the noretpoline_setup symbol exists only if CONFIG_RETPOLINE is set
+# *AND* if the compiler is retpoline-compliant, so look for that symbol
+if [ -n "$vmlinux" ]; then
+	# look for the symbol
+	if [ -e /boot/System.map-$(uname -r) ]; then
+		if grep -qw noretpoline_setup /boot/System.map-$(uname -r); then
+			retpoline_compiler=1
+			pstatus green YES "noretpoline_setup symbol found in System.map"
+		fi
+	elif which nm >/dev/null 2>&1; then
+		# the proper way: use nm and look for the symbol
+		if nm "$vmlinux" 2>/dev/null | grep -qw 'noretpoline_setup'; then
+			retpoline_compiler=1
+			pstatus green YES "noretpoline_setup symbol found in vmlinux"
+		fi
+	elif grep -q noretpoline_setup "$vmlinux"; then
+		# if we don't have nm, nevermind, the symbol name is long enough to not have
+		# any false positive using good old grep directly on the binary
+		retpoline_compiler=1
+		pstatus green YES "noretpoline_setup symbol found in vmlinux"
+	fi
+	if [ "$retpoline_compiler" != 1 ]; then
+		pstatus red NO
+	fi
+else
+	pstatus yellow UNKNOWN "couldn't find your kernel image"
+fi
+
+
 /bin/echo -ne "> \033[46m\033[30mSTATUS:\033[0m "
 if grep -q AMD /proc/cpuinfo; then
 	pstatus green "NOT VULNERABLE" "your CPU is not vulnerable as per the vendor"
 elif [ "$ibrs_enabled" = 1 -o "$ibrs_enabled" = 2 ]; then
 	pstatus green "NOT VULNERABLE" "IBRS mitigates the vulnerability"
-elif [ "$retpoline" = 1 ]; then
+elif [ "$retpoline" = 1 -a "$retpoline_compiler" = 1 ]; then
-	pstatus green "NOT VULNERABLE" "retpolines mitigate the vulnerability"
+	pstatus green "NOT VULNERABLE" "retpoline mitigate the vulnerability"
 else
-	pstatus red VULNERABLE "IBRS hardware + kernel support OR kernel with retpolines are needed to mitigate the vulnerability"
+	pstatus red VULNERABLE "IBRS hardware + kernel support OR kernel with retpoline are needed to mitigate the vulnerability"
 fi
 
 ##########
@@ -244,13 +281,13 @@ kpti_can_tell=0
 if [ -e /proc/config.gz ]; then
 	# either the running kernel exports his own config
 	kpti_can_tell=1
-	if zgrep -q '^CONFIG_PAGE_TABLE_ISOLATION=y' /proc/config.gz; then
+	if zgrep -q '^\(CONFIG_PAGE_TABLE_ISOLATION=y\|CONFIG_KAISER=y\)' /proc/config.gz; then
 		kpti_support=1
 	fi
 elif [ -e /boot/config-$(uname -r) ]; then
 	# or we can find a config file in /root with the kernel release name
 	kpti_can_tell=1
-	if grep  -q '^CONFIG_PAGE_TABLE_ISOLATION=y' /boot/config-$(uname -r); then
+	if grep  -q '^\(CONFIG_PAGE_TABLE_ISOLATION=y\|CONFIG_KAISER=y\)' /boot/config-$(uname -r); then
 		kpti_support=1
 	fi
 fi
@@ -282,16 +319,30 @@ fi
 /bin/echo -n "* PTI enabled and active: "
 if grep ^flags /proc/cpuinfo | grep -qw pti; then
 	# vanilla PTI patch sets the 'pti' flag in cpuinfo
-	pstatus green YES
 	kpti_enabled=1
+elif grep ^flags /proc/cpuinfo | grep -qw kaiser; then
+	# kernel line 4.9 sets the 'kaiser' flag in cpuinfo
+	kpti_enabled=1
+elif [ -e /sys/kernel/debug/x86/pti_enabled ]; then
+	# RedHat Backport creates a dedicated file, see https://access.redhat.com/articles/3311301
+	kpti_enabled=$(cat /sys/kernel/debug/x86/pti_enabled 2>/dev/null)
 elif dmesg | grep -Eq 'Kernel/User page tables isolation: enabled|Kernel page table isolation enabled'; then
 	# if we can't find the flag, grep in dmesg
-	pstatus green YES
 	kpti_enabled=1
+else
+	kpti_enabled=0
+fi
+if [ "$kpti_enabled" = 1 ]; then
+	pstatus green YES
 else
 	pstatus red NO
 fi
 
+if [ "$mounted_debugfs" = 1 ]; then
+	# umount debugfs if we did mount it ourselves
+	umount /sys/kernel/debug
+fi
+
 /bin/echo -ne "> \033[46m\033[30mSTATUS:\033[0m "
 if grep -q AMD /proc/cpuinfo; then
 	pstatus green "NOT VULNERABLE" "your CPU is not vulnerable as per the vendor"